Search Results
For Cylinder ID For Cylinder ID |
|---|
For Use On For Use On |
|---|
|
|
Grit Grit |
|---|
|
|
|
For Finish For Finish |
|---|
|
Abrasive Material Abrasive Material |
|---|
|
Shank Style Shank Style |
|---|
|
Recommended Speed Recommended Speed |
|---|
|
About Finishing
More
Multipurpose Flexible Cylinder Hones
Twisted Wire Shank
Hex Shank
Abrasive-embedded balls at the ends of the flexible spindles press against the inside of a cylinder to remove material and leave a smooth, even finish. These hones are slightly oversized to maximize contact with the work surface. When your cylinder ID falls between two sizes, order the larger hone. Use with portable drills, drill presses, and CNC machines. Hones should be rotating when inserted into or removed from cylinders. We recommend using them with honing oil to keep the abrasive surface clean.
Grit is identified by the color on the hone tip.
Also Available: Hones made of boron carbide, alumina zirconia, levigated alumina, ceramic, and cubic boron nitride. Please order 4424A999 and specify abrasive, cylinder ID, and grit.
| For Cylinder ID | Shank Dia. | Shank Hex Size | O'all Lg. | Abrasive Lg. | Recommended Speed, rpm | 120 Grit (Smooth) | 180 Grit (Smooth) Red | 240 Grit (Extra Smooth) Blue | 320 Grit (Extra Smooth) White | 600 Grit (Polished) Pink | 800 Grit (Polished) Light Blue | |
Silicon Carbide—For Use On Steel and Stainless Steel | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Twisted Wire Shank | ||||||||||||
| 3/16" | 0.073" | __ | 6" | 3/4" | 1,000-1,200 | 00000000 | ||||||
| 1/4" | 0.112" | __ | 8" | 1 1/2" | 1,000-1,200 | 00000000 | ||||||
| 1/2" | 0.168" | __ | 8" | 2 1/2" | 900-1,000 | 00000000 | ||||||
| 5/8" | 0.19" | __ | 8" | 2 1/2" | 900-1,000 | 00000000 | ||||||
| 3/4" | 0.19" | __ | 8" | 2 1/2" | 900-1,000 | 00000000 | ||||||
| 7/8" | 0.22" | __ | 8" | 3" | 900-1,000 | 00000000 | ||||||
| 15/16" | 0.22" | __ | 8" | 3" | 900-1,000 | 00000000 | ||||||
| 1" | 0.22" | __ | 8" | 3" | 900-1,000 | 00000000 | ||||||
| 1 1/8" | 0.245" | __ | 8" | 3" | 900-1,000 | 00000000 | ||||||
| 1 1/4" | 0.245" | __ | 8" | 3" | 900-1,000 | 00000000 | ||||||
| 1 3/8" | 0.245" | __ | 8" | 3" | 900-1,000 | 00000000 | ||||||
| 1 1/2" | 0.245" | __ | 8" | 3" | 900-1,000 | 00000000 | ||||||
| 1 5/8" | 0.245" | __ | 8" | 3" | 900-1,000 | 00000000 | ||||||
| 1 3/4" | 0.245" | __ | 8" | 3" | 900-1,000 | 00000000 | ||||||
| 1 7/8" | 0.245" | __ | 8" | 3" | 900-1,000 | 00000000 | ||||||
| 2" | 0.245" | __ | 8" | 3" | 600-900 | 00000000 | ||||||
| 2 1/8" | 0.245" | __ | 5" | 1 1/2" | 600-900 | 00000000 | ||||||
| 2 1/8" | 0.245" | __ | 8" | 3" | 600-900 | 00000000 | ||||||
| 2 1/4" | 0.245" | __ | 8" | 3" | 600-900 | 00000000 | ||||||
| 2 3/8" | 0.245" | __ | 8" | 3" | 600-900 | 00000000 | ||||||
| 2 1/2" | 0.245" | __ | 5" | 1 1/2" | 600-900 | 00000000 | ||||||
| 2 1/2" | 0.245" | __ | 8" | 3" | 600-900 | 00000000 | ||||||
| 2 5/8" | 0.245" | __ | 8" | 3" | 600-900 | 00000000 | ||||||
| 2 3/4" | 0.245" | __ | 8" | 3" | 600-900 | 00000000 | ||||||
| 2 7/8" | 0.245" | __ | 8" | 3" | 600-900 | 00000000 | ||||||
| 3" | 0.245" | __ | 8" | 3" | 600-900 | 00000000 | ||||||
| 3 1/8" | 0.245" | __ | 5" | 1 1/2" | 600-900 | 00000000 | ||||||
| 3 1/4" | 0.31" | __ | 13 1/2" | 3 1/2" | 600-900 | 00000000 | ||||||
| 3 1/2" | 0.31" | __ | 13 1/2" | 3 1/2" | 600-900 | 00000000 | ||||||
| 3 3/4" | 0.31" | __ | 13 1/2" | 3 1/2" | 600-900 | 00000000 | ||||||
| 4" | 0.31" | __ | 13 1/2" | 6" | 350-600 | 00000000 | ||||||
| 4 1/8" | 0.31" | __ | 13 1/2" | 4" | 350-600 | 00000000 | ||||||
| 4 1/4" | 0.31" | __ | 13 1/2" | 6" | 350-600 | 00000000 | ||||||
| 4 1/2" | 0.31" | __ | 13 1/2" | 6" | 350-600 | 00000000 | ||||||
| 4 5/8" | 0.31" | __ | 13 1/2" | 4" | 350-600 | 00000000 | ||||||
| 5" | 0.35" | __ | 17 1/2" | 6" | 350-600 | 00000000 | ||||||
| 5 1/2" | 0.35" | __ | 17 1/2" | 6" | 350-600 | 00000000 | ||||||
| 6" | 0.42" | __ | 17 1/2" | 6 1/4" | 350-600 | 00000000 | ||||||
| 6 1/2" | 0.42" | __ | 17 1/2" | 6 1/4" | 350-600 | 00000000 | ||||||
| 7" | 0.42" | __ | 17 1/2" | 7" | 350-600 | 00000000 | ||||||
| 8" | 0.42" | __ | 17 1/2" | 7 1/4" | 225-300 | 00000000 | ||||||
| 4mm | 0.055" | __ | 6" | 3/4" | 1,000-1,200 | 00000000 | ||||||
| 4.5mm | 0.055" | __ | 6" | 3/4" | 1,000-1,200 | 00000000 | ||||||
| 5mm | 0.083" | __ | 8" | 1 1/2" | 1,000-1,200 | 00000000 | ||||||
| 5.5mm | 0.083" | __ | 8" | 1 1/2" | 1,000-1,200 | 00000000 | ||||||
| 6mm | 0.112" | __ | 8" | 1 1/2" | 1,000-1,200 | 00000000 | ||||||
| 6.4mm | 0.112" | __ | 8" | 1 1/2" | 1,000-1,200 | 00000000 | ||||||
| 7mm | 0.125" | __ | 8" | 2" | 1,000-1,200 | 00000000 | ||||||
| 8mm | 0.14" | __ | 8" | 2" | 1,000-1,200 | 00000000 | ||||||
| 9mm | 0.14" | __ | 8" | 2" | 1,000-1,200 | 00000000 | ||||||
| 9.5mm | 0.14" | __ | 8" | 2" | 1,000-1,200 | 00000000 | ||||||
| 10mm | 0.14" | __ | 8" | 2" | 1,000-1,200 | 00000000 | ||||||
| 11mm | 0.14" | __ | 8" | 2" | 1,000-1,200 | 00000000 | ||||||
| 12mm | 0.168" | __ | 8" | 2 1/2" | 1,000-1,200 | 00000000 | ||||||
| 14mm | 0.19" | __ | 8" | 2 1/2" | 900-1,000 | 00000000 | ||||||
| 18mm | 0.19" | __ | 8" | 2 1/2" | 900-1,000 | 00000000 | ||||||
| 20mm | 0.19" | __ | 8" | 2 1/2" | 900-1,000 | 00000000 | ||||||
Hex Shank | ||||||||||||
| 9" | __ | 0.5" | 34" | 8" | 225-300 | 00000000 | ||||||
| 10" | __ | 0.5" | 34" | 8" | 225-300 | 00000000 | ||||||
| 11" | __ | 0.5" | 34" | 9" | 225-300 | 00000000 | ||||||
| 12" | __ | 0.5" | 34" | 9" | 125-200 | 00000000 | ||||||
| 13" | __ | 0.625" | 34" | 10" | 125-200 | 00000000 | ||||||
| 14" | __ | 0.625" | 34" | 10" | 125-200 | 00000000 | ||||||
| 15" | __ | 0.625" | 34" | 12" | 125-200 | 00000000 | ||||||
| 16" | __ | 0.625" | 34" | 12" | 125-200 | 00000000 | ||||||
| 17" | __ | 0.625" | 34" | 12" | 125-200 | 00000000 | ||||||
| 18" | __ | 0.625" | 34" | 12" | 125-200 | 00000000 | ||||||
Flexible Cylinder Hones for Aluminum and Soft Metals
Twisted Wire Shank
Hex Shank
The abrasive won’t clog, especially when used with honing oil. It’s embedded in balls at the ends of flexible spindles that press against the inside of a cylinder to remove material and leave a smooth, even finish. These hones are slightly oversized to maximize contact with the work surface. When your cylinder ID falls between two sizes, order the larger hone. Use with portable drills, drill presses, and CNC machines. Hones should be rotating when inserted into or removed from cylinders. We recommend using them with honing oil to keep the abrasive surface clean.
Grit is identified by the color on the hone tip.
Also Available: Hones made of boron carbide, alumina zirconia, levigated alumina, ceramic, and cubic boron nitride. Please order 4424A999 and specify abrasive, cylinder ID, and grit.
| For Cylinder ID | Shank Dia. | Shank Hex Size | O'all Lg. | Abrasive Lg. | Recommended Speed, rpm | 120 Grit (Smooth) | 180 Grit (Smooth) Red | 240 Grit (Extra Smooth) Blue | 320 Grit (Extra Smooth) White | 600 Grit (Polished) Pink | 800 Grit (Polished) Light Blue | |
Aluminum Oxide—For Use On Aluminum, Brass, Bronze, and Copper | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
Twisted Wire Shank | ||||||||||||
| 3/16" | 0.073" | __ | 6" | 3/4" | 1,000-1,200 | 00000000 | ||||||
| 1/4" | 0.112" | __ | 8" | 1 1/2" | 1,000-1,200 | 00000000 | ||||||
| 1/2" | 0.168" | __ | 8" | 2 1/2" | 900-1,000 | 00000000 | ||||||
| 5/8" | 0.19" | __ | 8" | 2 1/2" | 900-1,000 | 00000000 | ||||||
| 3/4" | 0.19" | __ | 8" | 2 1/2" | 900-1,000 | 00000000 | ||||||
| 7/8" | 0.22" | __ | 8" | 3" | 900-1,000 | 00000000 | ||||||
| 15/16" | 0.22" | __ | 8" | 3" | 900-1,000 | 00000000 | ||||||
| 1" | 0.22" | __ | 8" | 3" | 900-1,000 | 00000000 | ||||||
| 1 1/8" | 0.245" | __ | 8" | 3" | 900-1,000 | 00000000 | ||||||
| 1 1/4" | 0.245" | __ | 8" | 3" | 900-1,000 | 00000000 | ||||||
| 1 3/8" | 0.245" | __ | 8" | 3" | 900-1,000 | 00000000 | ||||||
| 1 1/2" | 0.245" | __ | 8" | 3" | 900-1,000 | 00000000 | ||||||
| 1 5/8" | 0.245" | __ | 8" | 3" | 900-1,000 | 00000000 | ||||||
| 1 3/4" | 0.245" | __ | 8" | 3" | 900-1,000 | 00000000 | ||||||
| 1 7/8" | 0.245" | __ | 8" | 3" | 900-1,000 | 00000000 | ||||||
| 2" | 0.245" | __ | 8" | 3" | 600-900 | 00000000 | ||||||
| 2 1/8" | 0.245" | __ | 5" | 1 1/2" | 600-900 | 00000000 | ||||||
| 2 1/8" | 0.245" | __ | 8" | 3" | 600-900 | 00000000 | ||||||
| 2 1/4" | 0.245" | __ | 8" | 3" | 600-900 | 00000000 | ||||||
| 2 3/8" | 0.245" | __ | 8" | 3" | 600-900 | 00000000 | ||||||
| 2 1/2" | 0.245" | __ | 5" | 1 1/2" | 600-900 | 00000000 | ||||||
| 2 1/2" | 0.245" | __ | 8" | 3" | 600-900 | 00000000 | ||||||
| 2 5/8" | 0.245" | __ | 8" | 3" | 600-900 | 00000000 | ||||||
| 2 3/4" | 0.245" | __ | 8" | 3" | 600-900 | 00000000 | ||||||
| 2 7/8" | 0.245" | __ | 8" | 3" | 600-900 | 00000000 | ||||||
| 3" | 0.245" | __ | 8" | 3" | 600-900 | 00000000 | ||||||
| 3 1/8" | 0.245" | __ | 5" | 1 1/2" | 600-900 | 00000000 | ||||||
| 3 1/4" | 0.31" | __ | 13 1/2" | 3 1/2" | 600-900 | 00000000 | ||||||
| 3 1/2" | 0.31" | __ | 13 1/2" | 3 1/2" | 600-900 | 00000000 | ||||||
| 3 3/4" | 0.31" | __ | 13 1/2" | 3 1/2" | 600-900 | 00000000 | ||||||
| 4" | 0.31" | __ | 13 1/2" | 6" | 350-600 | 00000000 | ||||||
| 4 1/8" | 0.31" | __ | 13 1/2" | 4" | 350-600 | 00000000 | ||||||
| 4 1/4" | 0.31" | __ | 13 1/2" | 6" | 350-600 | 00000000 | ||||||
| 4 1/2" | 0.31" | __ | 13 1/2" | 6" | 350-600 | 00000000 | ||||||
| 4 5/8" | 0.31" | __ | 13 1/2" | 4" | 350-600 | 00000000 | ||||||
| 5" | 0.35" | __ | 17 1/2" | 6" | 350-600 | 00000000 | ||||||
| 5 1/2" | 0.35" | __ | 17 1/2" | 6" | 350-600 | 00000000 | ||||||
| 6" | 0.42" | __ | 17 1/2" | 6 1/4" | 350-600 | 00000000 | ||||||
| 6 1/2" | 0.42" | __ | 17 1/2" | 6 1/4" | 350-600 | 00000000 | ||||||
| 7" | 0.42" | __ | 17 1/2" | 7" | 350-600 | 00000000 | ||||||
| 8" | 0.42" | __ | 17 1/2" | 7 1/4" | 225-300 | 00000000 | ||||||
| 4mm | 0.055" | __ | 6" | 3/4" | 1,000-1,200 | 00000000 | ||||||
| 4.5mm | 0.055" | __ | 6" | 3/4" | 1,000-1,200 | 00000000 | ||||||
| 5mm | 0.083" | __ | 8" | 1 1/2" | 1,000-1,200 | 00000000 | ||||||
| 5.5mm | 0.083" | __ | 8" | 1 1/2" | 1,000-1,200 | 00000000 | ||||||
| 6mm | 0.112" | __ | 8" | 1 1/2" | 1,000-1,200 | 00000000 | ||||||
| 6.4mm | 0.112" | __ | 8" | 1 1/2" | 1,000-1,200 | 00000000 | ||||||
| 7mm | 0.125" | __ | 8" | 2" | 1,000-1,200 | 00000000 | ||||||
| 8mm | 0.14" | __ | 8" | 2" | 1,000-1,200 | 00000000 | ||||||
| 9mm | 0.14" | __ | 8" | 2" | 1,000-1,200 | 00000000 | ||||||
| 9.5mm | 0.14" | __ | 8" | 2" | 1,000-1,200 | 00000000 | ||||||
| 10mm | 0.14" | __ | 8" | 2" | 1,000-1,200 | 00000000 | ||||||
| 11mm | 0.14" | __ | 8" | 2" | 1,000-1,200 | 00000000 | ||||||
| 12mm | 0.168" | __ | 8" | 2 1/2" | 1,000-1,200 | 00000000 | ||||||
| 14mm | 0.19" | __ | 8" | 2 1/2" | 900-1,000 | 00000000 | ||||||
| 18mm | 0.19" | __ | 8" | 2 1/2" | 900-1,000 | 00000000 | ||||||
| 20mm | 0.19" | __ | 8" | 2 1/2" | 900-1,000 | 00000000 | ||||||
Hex Shank | ||||||||||||
| 9" | __ | 0.5" | 34" | 8" | 225-300 | 00000000 | ||||||
| 10" | __ | 0.5" | 34" | 8" | 225-300 | 00000000 | ||||||
| 11" | __ | 0.5" | 34" | 9" | 225-300 | 00000000 | ||||||
| 12" | __ | 0.5" | 34" | 9" | 125-200 | 00000000 | ||||||
| 13" | __ | 0.625" | 34" | 10" | 125-200 | 00000000 | ||||||
| 14" | __ | 0.625" | 34" | 10" | 125-200 | 00000000 | ||||||
| 15" | __ | 0.625" | 34" | 12" | 125-200 | 00000000 | ||||||
| 16" | __ | 0.625" | 34" | 12" | 125-200 | 00000000 | ||||||
| 17" | __ | 0.625" | 34" | 12" | 125-200 | 00000000 | ||||||
| 18" | __ | 0.625" | 34" | 12" | 125-200 | 00000000 | ||||||
Flexible Cylinder Hones for Hard Metals
A long-lasting diamond abrasive is embedded in balls at the ends of flexible spindles that press against the inside of a cylinder to remove material and leave a smooth, even finish. These hones are slightly oversized to maximize contact with the work surface. When your cylinder ID falls between two sizes, order the larger hone. Use with portable drills, drill presses, and CNC machines. Hones should be rotating when inserted into or removed from cylinders. We recommend using them with honing oil to keep the abrasive surface clean.
Abrasive material is identified by the color on the stem.
Grit is approximate and identified by the color on the hone tip.
Also Available: Hones made of boron carbide, alumina zirconia, levigated alumina, ceramic, and cubic boron nitride. Please order 4424A999 and specify abrasive, cylinder ID, and grit.
| For Cylinder ID | Shank Dia. | O'all Lg. | Abrasive Lg. | Recommended Speed, rpm | 180 Grit (Smooth) Red | 400 Grit (Extra Smooth) Yellow | 800 Grit (Polished) Light Blue | |
Diamond (Yellow)—For Use On Hardened Steel, Titanium, Iron, and Nickel | ||||||||
|---|---|---|---|---|---|---|---|---|
Twisted Wire Shank | ||||||||
| 3/16" | 0.073" | 6" | 3/4" | 1,000-1,200 | 0000000 | |||
| 1/4" | 0.112" | 8" | 1 1/2" | 1,000-1,200 | 0000000 | |||
| 1/2" | 0.168" | 8" | 3/4" | 900-1,000 | 0000000 | |||
| 5/8" | 0.19" | 8" | 2 1/2" | 900-1,000 | 0000000 | |||
| 3/4" | 0.19" | 8" | 2 1/2" | 900-1,000 | 0000000 | |||
| 7/8" | 0.22" | 8" | 3" | 900-1,000 | 0000000 | |||
| 15/16" | 0.22" | 8" | 3" | 900-1,000 | 0000000 | |||
| 1" | 0.22" | 8" | 3" | 900-1,000 | 0000000 | |||
| 1 1/8" | 0.245" | 8" | 3" | 900-1,000 | 0000000 | |||
| 1 1/4" | 0.245" | 8" | 3" | 900-1,000 | 0000000 | |||
| 1 3/8" | 0.245" | 8" | 3" | 900-1,000 | 0000000 | |||
| 1 1/2" | 0.245" | 8" | 3" | 900-1,000 | 0000000 | |||
| 4mm | 0.055" | 6" | 3/4" | 1,000-1,200 | 0000000 | |||
| 4.5mm | 0.055" | 6" | 3/4" | 1,000-1,200 | 0000000 | |||
| 5mm | 0.083" | 8" | 1 1/2" | 1,000-1,200 | 0000000 | |||
| 5.5mm | 0.083" | 8" | 1 1/2" | 1,000-1,200 | 0000000 | |||
| 6mm | 0.112" | 8" | 1 1/2" | 1,000-1,200 | 0000000 | |||
| 6.4mm | 0.112" | 8" | 1 1/2" | 1,000-1,200 | 0000000 | |||
| 9.5mm | 0.14" | 8" | 2" | 1,000-1,200 | 0000000 | |||
| 10mm | 0.14" | 8" | 2" | 1,000-1,200 | 0000000 | |||
| 11mm | 0.14" | 8" | 2" | 1,000-1,200 | 0000000 | |||
| 12mm | 0.168" | 8" | 2 1/2" | 1,000-1,200 | 0000000 | |||
| 14mm | 0.19" | 8" | 2 1/2" | 900-1,000 | 0000000 | |||
| 18mm | 0.19" | 8" | 2 1/2" | 900-1,000 | 0000000 | |||
| 20mm | 0.19" | 8" | 2 1/2" | 900-1,000 | 0000000 | |||
Precision-Finish Cylinder Hones
Precisely size the hone to your cylinder in micrometer increments using the dial. Clip two stones and two felt cleaning wipers onto the four holders and use with portable drills. We recommend using them with honing oil to keep the abrasive surface clean.
Silicon Carbide—For Use On Steel, Stainless Steel, Titanium, Iron, Aluminum, Brass, Bronze, Copper, and Nickel
| For Cylinder ID | Shank Dia. | O'all Lg. | Abrasive Lg. | Recommended Speed, rpm | No. of Stones | Includes | Each | |
| 1 3/4"-2 3/4" | 0.5" | 14" | 3 1/2" | 750 | 6 | Six Smooth-Finish (180 Grit) Stones Four Holders Six Wipers | 0000000 | 0000000 |
| 3"-4 1/4" | 0.5" | 17" | 5" | 500 | 4 | Two Rough-Finish (80 Grit) Stones Two Smooth-Finish (180 Grit) Stones Four Holders Four Wipers One 1/2" Dia. Driver Extension | 0000000 | 000000 |
Replacement Stones and Wipers
| For Cylinder ID | Abrasive Lg. | No. of Pieces | Includes | Each | |
80 Grit (Rough) | |||||
|---|---|---|---|---|---|
Silicon Carbide | |||||
| 1 3/4"-2 7/32" | 3 1/2" | 4 | Two Stones, Two Wipers | 0000000 | 000000 |
| 2"-2 1/2" | 3 1/2" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
| 2 11/32"-2 3/4" | 3 1/2" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
| 2 3/4"-3 3/4" | 5" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
| 3"-10 1/4" | 5" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
180 Grit (Smooth) | |||||
Silicon Carbide | |||||
| 1 3/4"-2 7/32" | 3 1/2" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
| 2"-2 1/2" | 3 1/2" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
| 2 11/32"-2 3/4" | 3 1/2" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
| 2 3/4"-3 3/4" | 5" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
| 3"-10 1/4" | 5" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
280 Grit (Extra Smooth) | |||||
Silicon Carbide | |||||
| 1 3/4"-2 7/32" | 3 1/2" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
| 2"-2 1/2" | 3 1/2" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
| 2 11/32"-2 3/4" | 3 1/2" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
| 2 3/4"-3 3/4" | 5" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
| 3"-10 1/4" | 5" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
500 Grit (Polished) | |||||
Silicon Carbide | |||||
| 3"-10 1/4" | 5" | 4 | Two Stones, Two Wipers | 0000000 | 00000 |
Replacement Holders
| For Cylinder ID | No. of Pieces | Includes | Each | |
| 2 3/4"-3 3/4" | 4 | Two Holders for Stones Two Holders for Wipers | 0000000 | 000000 |
| 3"-4 1/4" | 4 | Two Holders for Stones Two Holders for Wipers | 0000000 | 00000 |
| 4"-6 1/4" | 4 | Two Holders for Stones Two Holders for Wipers | 0000000 | 00000 |
| 6 1/8"-10 1/4" | 4 | Two Holders for Stones Two Holders for Wipers | 0000000 | 00000 |
Hand-Held Diamond Sharpening Stones
A
B
D
E
Diamond is extremely hard and long lasting. No lubricants needed—use these stones dry or with water. Rinse with water to clean.
Style A is pocket size.
Styles B and H fold into the handle.
Rectangular
A | B | D |
E |
Diamond Surface | ||||||||
|---|---|---|---|---|---|---|---|---|
| Grit (For Finish) | Lg. | Wd. | Lubrication | Overall Lg. | Handle Material | For Blade Style | Each | |
Style A—Diamond | ||||||||
| 220 (Smooth) | 2 5/8" | 7/8" | Not Required | 6" | Plastic | Straight | 0000000 | 000000 |
| 325 (Extra Smooth) | 2 5/8" | 7/8" | Not Required | 6" | Plastic | Straight | 0000000 | 00000 |
| 600 (Polished) | 2 5/8" | 7/8" | Not Required | 6" | Plastic | Straight | 0000000 | 00000 |
| 1200 (Polished) | 2 5/8" | 7/8" | Not Required | 6" | Plastic | Straight | 0000000 | 00000 |
Style B—Diamond | ||||||||
| 220 (Smooth) | 4 3/8" | 7/8" | Not Required | 9 1/2" | Plastic | Straight | 0000000 | 00000 |
| 325 (Extra Smooth) | 4 3/8" | 7/8" | Not Required | 9 1/2" | Plastic | Straight | 0000000 | 00000 |
| 600 (Polished) | 4 3/8" | 7/8" | Not Required | 9 1/2" | Plastic | Straight | 0000000 | 00000 |
| 1200 (Polished) | 4 3/8" | 7/8" | Not Required | 9 1/2" | Plastic | Straight | 0000000 | 00000 |
Style B—Diamond × Diamond | ||||||||
| 220 (Smooth) × 325 (Extra Smooth) | 4 3/8" | 7/8" | Not Required × Not Required | 9 1/2" | Plastic | Straight | 0000000 | 00000 |
| 325 (Extra Smooth) × 600 (Polished) | 4 3/8" | 7/8" | Not Required × Not Required | 9 1/2" | Plastic | Straight | 0000000 | 00000 |
| 600 (Polished) × 1200 (Polished) | 4 3/8" | 7/8" | Not Required × Not Required | 9 1/2" | Plastic | Straight | 0000000 | 00000 |
Style D—Diamond | ||||||||
| 320 (Extra Smooth) | 1" | 3/8" | Not Required | 5" | Aluminum | Straight | 0000000 | 00000 |
| 400 (Extra Smooth) | 1" | 3/8" | Not Required | 5" | Aluminum | Straight | 0000000 | 00000 |
Style E—Diamond × Diamond | ||||||||
| 100 (Smooth) × 320 (Extra Smooth) | 1" | 3/8" | Not Required × Not Required | 5" | Aluminum | Straight | 0000000 | 00000 |
| 150 (Smooth) × 320 (Extra Smooth) | 1" | 3/8" | Not Required × Not Required | 5" | Aluminum | Straight | 0000000 | 00000 |
| 220 (Smooth) × 320 (Extra Smooth) | 1" | 3/8" | Not Required × Not Required | 5" | Aluminum | Straight | 0000000 | 00000 |
| 320 (Extra Smooth) × 400 (Extra Smooth) | 1" | 3/8" | Not Required × Not Required | 5" | Aluminum | Straight | 0000000 | 00000 |
| 320 (Extra Smooth) × 600 (Polished) | 1" | 3/8" | Not Required × Not Required | 5" | Aluminum | Straight | 0000000 | 00000 |
Bench Diamond Sharpening Stone Sets
Diamond is extremely hard and long lasting. No lubricants needed—use these stones dry or with water. Rinse with water to clean.
| No. of Pieces | Lubrication | Includes | Each | |
Rectangular | ||||
|---|---|---|---|---|
| 4 | Not Required | Smooth-Finish (220 Grit) Diamond Stone for Straight Blades—3 3/8" Diamond Surface Lg. × 7/8" Diamond Surface Wd. × 4 1/4" O'all Lg. Extra-Smooth-Finish (325 Grit) Diamond Stone for Straight Blades—3 3/8" Diamond Surface Lg. × 7/8" Diamond Surface Wd. × 4 1/4" O'all Lg. Polished-Finish (600 Grit) Diamond Stone for Straight Blades—3 3/8" Diamond Surface Lg. × 7/8" Diamond Surface Wd. × 4 1/4" O'all Lg. Polished-Finish (1200 Grit) Diamond Stone for Straight Blades—3 3/8" Diamond Surface Lg. × 7/8" Diamond Surface Wd. × 4 1/4" O'all Lg. | 0000000 | 000000 |
Bench Diamond Sharpening Stones
A
B
Diamond is extremely hard and long lasting. No lubricants needed—use these stones dry or with water. Rinse with water to clean.
Diamond Surface | ||||||
|---|---|---|---|---|---|---|
| Grit (For Finish) | Lg. | Wd. | Lubrication | Overall Lg. | Each | |
Rectangular | ||||||
Style A—Diamond | ||||||
| 220 (Smooth) | 6" | 2" | Not Required | 6" | 0000000 | 000000 |
| 325 (Extra Smooth) | 6" | 2" | Not Required | 6" | 0000000 | 00000 |
| 600 (Polished) | 6" | 2" | Not Required | 6" | 0000000 | 00000 |
| 1200 (Polished) | 6" | 2" | Not Required | 6" | 0000000 | 00000 |
Style A—Diamond × Diamond | ||||||
| 220 (Smooth) × 325 (Extra Smooth) | 8" | 2 5/8" | Not Required × Not Required | 12" | 0000000 | 000000 |
| 220 (Smooth) × 325 (Extra Smooth) | 10" | 4" | Not Required × Not Required | 12" | 0000000 | 000000 |
| 325 (Extra Smooth) × 600 (Polished) | 8" | 2 5/8" | Not Required × Not Required | 12" | 0000000 | 000000 |
| 325 (Extra Smooth) × 600 (Polished) | 10" | 4" | Not Required × Not Required | 12" | 0000000 | 000000 |
| 325 (Extra Smooth) × 1200 (Polished) | 8" | 2 5/8" | Not Required × Not Required | 12" | 0000000 | 000000 |
| 325 (Extra Smooth) × 1200 (Polished) | 10" | 4" | Not Required × Not Required | 12" | 0000000 | 000000 |
| 600 (Polished) × 1200 (Polished) | 8" | 2 5/8" | Not Required × Not Required | 12" | 0000000 | 000000 |
| 600 (Polished) × 1200 (Polished) | 10" | 4" | Not Required × Not Required | 12" | 0000000 | 000000 |
Style B—Diamond | ||||||
| 325 (Extra Smooth) | 3 3/8" | 7/8" | Not Required | 4 1/4" | 0000000 | 00000 |
| 600 (Polished) | 3 3/8" | 7/8" | Not Required | 4 1/4" | 0000000 | 00000 |
V-Belts
