Clamp ID Clamp ID |
---|
|
Clamp Type Clamp Type |
---|
![]() | Quick Release |
Minimum Clamp ID Minimum Clamp ID |
---|
|
Maximum Clamp ID (Metric) Maximum Clamp ID (Metric) |
---|
|
|
Minimum Clamp ID (Metric) Minimum Clamp ID (Metric) |
---|
|
|
Band Width Band Width |
---|
|
For Use With For Use With |
---|
|
Material Material |
---|
|
Finish Finish |
---|
|
Housing Material Housing Material |
---|
|
Reusable Reusable |
---|
|
Maximum Temperature Maximum Temperature |
---|
|
Minimum Temperature Minimum Temperature |
---|
|
Band Thickness Band Thickness |
---|
|
Latch Material Latch Material |
---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
---|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
About Measuring Hose and Tube Clamps
What's the best way to determine the clamp size you'll need? Simply measure the outside diameter of your hose with the fitting installed. Some clamps accommodate a range of sizes, so be sure the size you need falls in the middle of that range.
More
Quick-Release Duct Hose Clamps

Flip the toggle latch to install and remove these clamps in seconds.
Clamps open completely for easy installation around blower hose and ventilation duct. They have fair corrosion resistance.
Note: When choosing a clamp, measure the outside diameter of your hose with the fitting installed.
For technical drawings and 3-D models, click on a part number.
Clamp ID Range | Band | ||||||
---|---|---|---|---|---|---|---|
Inch | mm | Wd. | Thick. | Temp. Range, °F | Reusable | Each | |
Galvanized Steel with Zinc-Plated Steel Latch | |||||||
4" to 4 1/4" | 101 to 108 | 7/8" | 0.035" | -250° to 500° | Yes | 00000000 | 000000 |
6" to 6 1/4" | 152 to 159 | 7/8" | 0.035" | -250° to 500° | Yes | 00000000 | 00000 |
8 3/16" to 8 3/8" | 208 to 213 | 7/8" | 0.035" | -250° to 500° | Yes | 00000000 | 00000 |
10 3/16" to 10 3/8" | 259 to 264 | 7/8" | 0.035" | -250° to 500° | Yes | 00000000 | 00000 |
12 1/4" to 12 7/16" | 311 to 316 | 7/8" | 0.035" | -250° to 500° | Yes | 00000000 | 00000 |
14 1/4" to 14 7/16" | 362 to 366 | 7/8" | 0.035" | -250° to 500° | Yes | 00000000 | 00000 |
16 3/16" to 16 3/8" | 411 to 415 | 7/8" | 0.035" | -250° to 500° | Yes | 00000000 | 00000 |
18 3/16" to 18 3/8" | 462 to 466 | 7/8" | 0.035" | -250° to 500° | Yes | 00000000 | 00000 |
20 3/16" to 20 3/8" | 513 to 517 | 7/8" | 0.035" | -250° to 500° | Yes | 00000000 | 00000 |
24 3/16" to 24 7/16" | 614 to 620 | 7/8" | 0.035" | -250° to 500° | Yes | 00000000 | 00000 |