These clamps are easier to install than worm-drive clamps—crimp the pinch points with pinch-clamp pincers for a secure hold. They are also known as ear clamps.

Unlike vibration-resistant pinch clamps, these have a torque rating for extra holding power in high-vibration applications. They are also known as high-torque clamps.

The T-bolt design provides excellent strength and creates a 360° seal. Clamps have a spring that automatically adjusts the clamp diameter when temperatures fluctuate.

Clamps have a slotted screw. Tighten with a slotted screwdriver, hex nut driver, or a wrench.

A thumb screw instead of a slotted screw allows you to install these clamps without any tools.

Here's everything you need to make your own 3" diameter and larger custom-length worm-drive clamps.

Clamps offer extra holding power in high-torque applications.

A double ring of thick wire provides a complete seal around large-diameter hose.

These clamps are easier to install than our Extra-Strength Low-Profile Band Clamps. Also known as center-punch clamps, they seal with a quick hammer blow to the buckle.

The end of the band curls back into the buckle—this gives these clamps up to 25% more strength than other low-profile clamps. They are also known as JS-style clamps.

Slide these clamps over your hose and heat-shrink them with a heavy duty heat gun. This process lets them conform to any shape hose.

A dimple in the ear creates spring-like action that allows these clamps to withstand vibration and temperature changes without loosening.

Remove the bolt and flip open the hinged bridge to install.

The bolt design provides high strength and creates a 360° seal to prevent leaks.

Create 4" diameter and larger worm-drive clamps that withstand high-temperature applications.

Flip the toggle latch to install and remove these clamps in seconds.

Elevate hose off the ground to protect it from damage, and to let water on the floor reach a drain.