Cut the hose to your desired length and attach the fittings. You don't need any special equipment to install.

The heating wire in this hose warms adhesives or paraffin wax to keep them flowing. Pair it with the matching temperature controller to set the temperature.

With an easy-to-cut hose and push-to-connect fittings, you can install a compressed air line system in just a few hours.

Transport wet food and drink at high pressures with a hose connected by sanitary fittings.

For easy access to lines that handle oily and fatty foods and beverages, this hose has flanged ends that join with quick-clamp fittings.

Use this hose to transfer fluid between pumps, cylinders, and other parts of your hydraulic system. It comes with female threaded fittings already attached, so it’s ready to use right out of the box.

Although only half the weight, this hose resists wear and tear 240 times better than our standard rubber hydraulic hose. It comes with female threaded fittings already attached, so it’s ready to use right out of the box.

For frequent connections, this hose has a socket end that's faster to connect and disconnect than a threaded fitting. This hose bends twice as sharply and resists wear and tear 80 times better than our basic hydraulic hose, thanks to its two layers of blended rubber.

The fittings are also known as an instrumentation fittings. They have two sleeves (double ferrules) that bite into metal tubing for a strong seal.

The Yor-Lok fitting is also known as an instrumentation fitting. It has two sleeves (double ferrules) that bite into metal tubing for a strong seal.

A braided exterior protects this hose from abrasion and over-bending. Also known as bellows, the ribbed interior makes it flexible enough to connect high-vacuum components that aren't directly aligned.

Often found in semiconductor manufacturing and other demanding industrial applications, this hose handles nearly perfect vacuum.

Sealed vacuum insulation and a reflective barrier inside this hose maintains the temperature of liquids as cold as -325° F. Similar to a thermos, this prevents heat transfer, so the exterior of the hose won’t freeze or form condensation. The tube stems on each end slide into tube fittings on a freezer or other equipment in your plant or laboratory.

Each hose is a different color so you can differentiate your lines.

Fittings are metal for better durability than plastic barbed hose fittings. They have sharper barbs than standard barbed hose fittings to grip push-on hose without the need for clamps or ferrules. The more you pull on the fittings, the tighter the hose will grip.

Also known as live swivels, these fittings swivel continuously 360° before and after installation. This not only makes installation easier, but also eliminates the twisting and kinking that can cause hose failure. Fittings are threaded on both ends so you can connect them directly to a threaded hose or to pumps, cylinders, and other equipment in your hydraulic system.

Fittings have sharp barbs that grip push-on hose with no clamps or ferrules required. The more you pull on the fittings, the tighter the hose will grip. Use in low-pressure hydraulic applications up to 350 psi.

Create or repair D.O.T. hose assemblies in the field with just a wrench and a vise, no crimper required.

This general purpose tubing is the industry standard for air and water applications.

This tubing won’t degrade when exposed to the damaging effects of UV light.

Thick walls give this tubing excellent abrasion resistance.

To identify lines at a glance, use different colored tubing as a color code.

Lightweight, spongy walls provide thermal insulation, so this tubing won’t produce condensation when cold air or fluid runs through it.

Commonly used in ice machines and other water applications, this tubing is treated to protect against degradation caused by bacteria, yeast, fungi, and mold.

A braid reinforcement gives this tubing excellent strength in high-pressure applications up to 250 psi.

With a unique combination of UV resistance and clarity, this tubing won’t degrade from the damaging effects of ultraviolet light exposure, and allows you to monitor flow through the line.

Keep your work site safe and clutter free–this coiled tubing extends when you need it and retracts out of the way when you don't.

Use this micro-sized tubing for delicate, precision applications.

This tubing maintains its flexibility, even when temperatures drop to -100° F.

Excellent strength and durability allow this tubing to handle high-pressure air and water applications up to 950 psi.

This self-extinguishing tubing meets UL 94 V-0 or UL 94 V-2 for flame retardance to delay the spread of flames to valuable equipment.

Keep your work area tidy with this coiled tubing that extends when you need it and retracts out of the way when you don’t.

To protect sensitive equipment, this tubing is made of nylon that’s specially formulated to let currents pass through, preventing static electricity buildup.

With a diameter of 2" or larger, this tubing has the girth to handle high-volume beverage and bulk food processing applications.

Not only can this tubing handle the highest temperatures of all our soft tubing for food, beverage, and dairy, it also has superior abrasion and crush resistance. Use in applications up to 450° F.

Conductive material embedded in the walls lets this tubing divert static buildup away from sensitive equipment when conveying dry materials such as flour, salt, and sugar. Tubing has a diameter of 4" or larger to handle bulk food processing applications.

Typically used in applications requiring movement, such as metering (peristaltic) pumps and robotics, this tubing can handle repeated bending and flexing.

Silicone with a metal additive, this tubing routes liquids and ingredients as hot as 390° F through your food plant and is caught by metal detectors if a piece falls into your line.

This tubing offers superior impact and crack resistance—even at low temperatures.

Made from TPE plastic, this tubing doesn’t contain plasticizers like DEHP, so it won’t impart tastes or odors to the fluid passing through.

Strong, yet pliable, this tubing is good for gradual bends and can handle repeated flexing.

Made of highly chemical-resistant materials, this tubing withstands harsh chemicals such as hydrochloric acid, sodium hydroxide, and sulfuric acid.

With a diameter of 2" or larger, this tubing has the girth to handle high volumes of acids and other harsh substances.

Commonly used in applications requiring movement, such as metering (peristaltic) pumps and robotics, this tubing can handle continuous bending and flexing.

Run chemicals through this tubing at temperatures between -100° F and 500° F.

The corrugated design allows this tubing to extend and compress just like an accordion.

You don’t have to worry about this tubing cracking due to stress or impact—even over a wide range of temperatures.

A lightweight alternative to stainless steel, this tubing can handle extreme-pressure applications up to 1,000 psi.

Cold temperatures pose no problems for this tubing—it stays strong and flexible, even when temperatures drop to -100° F.

This tubing can handle the highest temperatures of all of our fuel and lubricant tubing. Use it in applications up to 450° F.

This tubing is soft enough to handle continuous bending and flexing, yet tough enough to resist tearing and abrasion.

Not only is this tubing cured with platinum and free of plasticizers like DEHP, it can handle higher temperatures than any of our other high-purity soft tubing. Use in applications up to 450° F.

Designed for high-purity applications, this hard tubing is cleaned and bagged to prevent dirt and moisture from contaminating the inside. It is free of plasticizers like DEHP, so it won’t impart tastes or odors to the fluid running through it.

This tubing has hard walls like copper tubing, but is lighter in weight and easier to install. It connects to fittings with no heat or soldering required. Tubing meets NSF/ANSI Standard 61 for drinking water.

Packs contain nine pieces of tubing, each labeled with its hardness.

When your application does not require a smooth interior, this tubing is an economical choice.

This tubing is suitable for extreme-pressure applications reaching 15,000 psi—the highest pressure rating of all the tubing we offer.

A thin layer of silicon on the interior provides a smooth surface and offers protection against corrosive gases.

The interior and exterior are polished to a high-luster finish to resist particle buildup and allow for easy cleaning.

Polished to a 10 Ra finish on the inside, this tubing has the smoothest interior of any tubing we offer. It is commonly used in semiconductor applications.

A thin layer of silicon on the interior provides a smooth surface and offers protection against corrosive gases.

Bend this tubing into the shape you need without special tools or elbow fittings.

Commonly used in marine applications, this tubing contains magnesium for extra corrosion resistance.

This Type M tubing has the thinnest walls of all our copper tubing for drinking water. It withstands pressures up to 980 psi.

This Type K tubing has the thickest walls of all our copper tubing for drinking water. It withstands pressures up to 1,900 psi.

Often used in heating and cooling systems, this tubing insulates refrigerant to efficiently transfer heat between components.

The inside of this tubing is lined with 99% pure tin for added corrosion resistance.

This tubing has the strength to withstand vacuum applications up to 29" Hg.

With the lowest OD tolerance of all our steel tubing, this tubing is designed for precision applications.