System of Measurement System of Measurement |
---|
|
ID ID | Show |
---|
|
ID ID | Hide |
---|
Connection Style Connection Style |
---|
![]() |
Barbed |
![]() |
Compression |
![]() |
Push to Connect |
For Use With For Use With |
---|
Material Material |
---|
|
Flexibility Flexibility |
---|
![]() | Semi-Flexible |
![]() | Rigid |
Maximum Pressure @ Temperature Maximum Pressure@ Temperature |
---|
|
Clarity Clarity |
---|
![]() | ![]() |
Semi-Clear | Opaque |
Maximum Temperature Maximum Temperature |
---|
|
Minimum Temperature Minimum Temperature |
---|
|
Connection Type Connection Type |
---|
![]() | Tube |
Length Length |
---|
Maximum Vacuum Maximum Vacuum |
---|
|
Hardness Hardness |
---|
|
End Type End Type |
---|
|
Vacuum Rating Vacuum Rating |
---|
|
Sterilize With Sterilize With |
---|
|
More
This EVA tubing maintains its flexibility, even when temperatures drop to -100° F. Tubing has excellent impact and crack resistance, and also resists grease and UV light. It is semi-clear, so you get a limited view of what’s flowing through the line. It is semi-flexible, so it is good for gradual bends.
For technical drawings and 3-D models, click on a part number.
This general purpose tubing has hard walls, yet is flexible enough for gradual bends. It has excellent strength and durability.
Nylon tubing can handle lower temperatures than polypropylene tubing and can withstand higher pressures. It has slightly softer walls than polypropylene tubing, making it more flexible and impact absorbent.
Polypropylene tubing is more economical than nylon tubing.
Opaque tubing doesn’t allow you to see what’s flowing through the line. Semi-clear tubing gives you a limited view inside the line.
For technical drawings and 3-D models, click on a part number.
Also known as air brake tubing, this nylon tubing meets D.O.T. FMVSS 106 or D.O.T. FMVSS 49 specifications for testing and performance requirements in motor vehicle brake systems. Tubing is opaque, so you cannot see what is flowing through the line. It is semi-flexible, so it is good for gradual bends.
For technical drawings and 3-D models, click on a part number.
This tubing is self-extinguishing to delay the spread of flames to valuable equipment. Tubing is opaque, so you cannot see what’s flowing through the line. It is semi-flexible, so it is good for gradual bends.
Nylon tubing can withstand higher pressures than polyethylene tubing. It meets UL 94V0 for better flame retardance than polyethylene tubing, and is best suited for spot-welding or other applications where sparks can occur.
Polyethylene tubing can handle a wider temperature range than nylon tubing. It meets UL 94V2 for flame retardance and UL 1820 specifications and testing requirements for flame propagation and smoke density. It is designed for use in air control systems.
Tubing with stripe allows you to color-code your lines for easy identification.
For technical drawings and 3-D models, click on a part number.
Keep your work area tidy with this coiled tubing that extends when you need it and retracts out of the way when you don’t. Tubing is made of tough and abrasion-resistant nylon. It is semi-flexible, so it is good for gradual bends.
Semi-clear tubing gives you a limited view inside the line. Opaque tubing doesn’t allow you to see what’s flowing through the line.
Note: Length refers to the length you can extend the tubing. Overstretching can cause the tubing to lose its ability to fully retract back to its normal state. Retracted length refers to the length of the tubing when coiled.
For technical drawings and 3-D models, click on a part number.
ID | OD | Wall Thick. | Coil OD | Lg. | Retracted Lg. | Max. Pressure | Max. Vacuum | Each | |
Nylon Plastic | |||||||||
---|---|---|---|---|---|---|---|---|---|
Semi-Clear White | |||||||||
11/64" | 1/4" | 3/64" | 1 3/4" | 4 ft. | 6" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 000000 |
11/64" | 1/4" | 3/64" | 1 3/4" | 5 1/2 ft. | 9" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
11/64" | 1/4" | 3/64" | 1 3/4" | 7 1/2 ft. | 12" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
11/64" | 1/4" | 3/64" | 1 3/4" | 15 1/2 ft. | 25" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
11/64" | 1/4" | 3/64" | 1 3/4" | 22 1/2 ft. | 36" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
Opaque Black | |||||||||
11/64" | 1/4" | 3/64" | 1 3/4" | 4 ft. | 6" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
11/64" | 1/4" | 3/64" | 1 3/4" | 5 1/2 ft. | 9" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
11/64" | 1/4" | 3/64" | 1 3/4" | 7 1/2 ft. | 12" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
11/64" | 1/4" | 3/64" | 1 3/4" | 15 1/2 ft. | 25" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
11/64" | 1/4" | 3/64" | 1 3/4" | 22 1/2 ft. | 36" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
Opaque Blue | |||||||||
11/64" | 1/4" | 3/64" | 1 3/4" | 4 ft. | 6" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
11/64" | 1/4" | 3/64" | 1 3/4" | 5 1/2 ft. | 9" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
11/64" | 1/4" | 3/64" | 1 3/4" | 7 1/2 ft. | 12" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
11/64" | 1/4" | 3/64" | 1 3/4" | 15 1/2 ft. | 25" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
11/64" | 1/4" | 3/64" | 1 3/4" | 22 1/2 ft. | 36" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
Opaque Green | |||||||||
11/64" | 1/4" | 3/64" | 1 3/4" | 4 ft. | 6" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
11/64" | 1/4" | 3/64" | 1 3/4" | 5 1/2 ft. | 9" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
11/64" | 1/4" | 3/64" | 1 3/4" | 7 1/2 ft. | 12" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
11/64" | 1/4" | 3/64" | 1 3/4" | 15 1/2 ft. | 25" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
11/64" | 1/4" | 3/64" | 1 3/4" | 22 1/2 ft. | 36" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
Opaque Orange | |||||||||
11/64" | 1/4" | 3/64" | 1 3/4" | 4 ft. | 6" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 0000000 | 00000 |
11/64" | 1/4" | 3/64" | 1 3/4" | 5 1/2 ft. | 9" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 0000000 | 00000 |
11/64" | 1/4" | 3/64" | 1 3/4" | 7 1/2 ft. | 12" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 0000000 | 00000 |
11/64" | 1/4" | 3/64" | 1 3/4" | 15 1/2 ft. | 25" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 0000000 | 00000 |
11/64" | 1/4" | 3/64" | 1 3/4" | 22 1/2 ft. | 36" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 0000000 | 00000 |
Opaque Red | |||||||||
11/64" | 1/4" | 3/64" | 1 3/4" | 4 ft. | 6" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
11/64" | 1/4" | 3/64" | 1 3/4" | 5 1/2 ft. | 9" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
11/64" | 1/4" | 3/64" | 1 3/4" | 7 1/2 ft. | 12" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
11/64" | 1/4" | 3/64" | 1 3/4" | 15 1/2 ft. | 25" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
11/64" | 1/4" | 3/64" | 1 3/4" | 22 1/2 ft. | 36" | 330 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 |
Made of resilient polypropylene, this tubing won’t crack due to stress or impact. Tubing is semi-clear, so you get a limited view inside the line. It is semi-flexible, so it is good for gradual bends.
For technical drawings and 3-D models, click on a part number.
Made of moisture-resistant acetal, this tubing won’t soften and lose strength, even in high-humidity environments. Tubing is opaque, so you cannot see what’s flowing through the line. It is rigid and will not bend.
For technical drawings and 3-D models, click on a part number.
ID | OD | Wall Thick. | Max. Pressure | Color | Lg., ft. | Each | |
Opaque Acetal Plastic | |||||||
---|---|---|---|---|---|---|---|
11/64" | 1/4" | 3/64" | 260 psi @ 72° F | White | 5 | 000000 | 00000 |
Even without reinforcement, this polyethylene tubing withstands high pressures and will not collapse in vacuum applications. It has the chemical resistance to handle a variety of acids and other harsh substances. Tubing is semi-flexible, so it’s good for gradual bends.
Semi-clear tubing gives you a limited view of what’s flowing through the line. Opaque tubing doesn’t allow you to see inside the line.
For technical drawings and 3-D models, click on a part number.
This durable tubing has the best abrasion and wear resistance of all our hard tubing for chemicals. It can withstand a variety of acids and other harsh substances. Tubing is semi-clear, so you get a limited view inside the line. It is semi-flexible, so it’s good for gradual bends.
PVDF tubing is the most economical option. It is also known as Kynar.
Tubing that meets UL 94V0 is flame retardant, so it delays the spread of flames to valuable equipment.
For technical drawings and 3-D models, click on a part number.
This tubing offers superior impact and crack resistance—even at low temperatures. Made of FDA listed materials, it is suitable for use with food and beverage. It is made without plasticizers like DEHP, so it won’t impart tastes or odors to the fluid passing through it. Tubing is semi-flexible, so it is good for gradual bends.
Polyethylene tubing can withstand lower temperatures and higher pressures than EVA tubing.
Semi-clear tubing gives you a limited view inside the line. Opaque tubing doesn’t allow you to see inside the line.
For technical drawings and 3-D models, click on a part number.
Strong, hard walls give this tubing extra support in high-pressure and vacuum applications. It’s made of FDA listed materials, so it’s suitable for use with food and beverage. Free of plasticizers like DEHP, it won’t impart tastes or odors to the fluid passing through it.
Polyethylene tubing is semi-flexible and good for gradual bends, but it will crack if subjected to continual bending. Semi-clear tubing gives you a limited view inside the line. Opaque tubing doesn’t allow you to see inside the line.
For technical drawings and 3-D models, click on a part number.
ID | OD | Wall Thick. | Bend Radius | Max. Pressure | Max. Vacuum | Lengths, ft. | Per Ft. | |
Black—Inch | ||||||||
---|---|---|---|---|---|---|---|---|
11/64" | 1/4" | 1/32" | 1 1/4" | 200 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 00000 | |
Blue—Inch | ||||||||
11/64" | 1/4" | 3/64" | 1 1/4" | 200 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 000 | |
Green—Inch | ||||||||
11/64" | 1/4" | 3/64" | 1 1/4" | 200 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 000 | |
Red—Inch | ||||||||
11/64" | 1/4" | 3/64" | 1 1/4" | 200 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 000 | |
Yellow—Inch | ||||||||
11/64" | 1/4" | 3/64" | 1 1/4" | 200 psi @ 72° F | 28 in. of Hg @ 72° F | 00000000 | 000 |
Strong, yet pliable, this PVDF tubing is good for gradual bends and can handle repeated flexing. It is also known as Kynar. Suitable for use with food and beverage, it is made of FDA listed materials and meets NSF/ANSI 51 for food contact. Tubing also meets both NSF/ANSI 61 and NSF/ANSI 372 for use with drinking water systems. Tubing doesn’t contain plasticizers like DEHP, so it won’t impart tastes or odors to the fluid passing through it. It is semi-clear, so you get a limited view inside the line.
Made of durable polypropylene, this tubing won’t crack under stress—even when temperatures drop below freezing. It meets NSF/ANSI Standard 51 for food contact and is made of FDA listed materials. Tubing doesn’t contain plasticizers like DEHP, so it won’t impart tastes or odors to the fluid passing through it. It is opaque, so you cannot see inside the line. Tubing is semi-flexible and is good for gradual bends.
For technical drawings and 3-D models, click on a part number.
Tubing meets NSF/ANSI Standard 61 for drinking water.
Polyethylene plastic tubing is more economical than polyurethane rubber tubing and is the most common choice for drinking water applications. It meets ASTM D1693 for crack resistance. It is semi-clear, so it gives you a limited view of what’s flowing through the line. Tubing is semi-flexible and is good for gradual bends.