About Sleeving
More
About Conduit
More
About Metal Tubing
More
Smooth-Bore Seamless Steel Tubing
Seamless construction with no weld bead gives this tubing a smooth interior for unrestricted flow. It is stronger than welded tubing and can be flared without splitting. Do not use in corrosive environments.
- Temperature Range: See Table
- Bending Method: Tube Bender
- For Use With: Hydraulic Fluid, Natural Gas
- Compatible Tubing Fittings: Compression and Flared
Chemical-Resistant Tube Sleeving
Made of PVC, this sleeving resists chemicals, oil, and acids. It’s flame rated VW-1 to meet requirements for preventing the spread of flames based on a timed test with vertically suspended material. Because this sleeving is non-expandable, it does not stretch, so it’s best for applications where you know the exact diameter of the items you need to protect.
Flexible Plastic Conduit
Make tight bends in machine and equipment wiring with this conduit. Also known as mechanical protection tubing (MPT), it withstands vibration, is flame retardant, and resists oil, solvents, and UV light. When used with fittings for flexible plastic conduit, it seals out air and liquid.
Per Ft. | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Conduit Trade Size  | ID | OD | Bend Radius | Material | Color | Temperature Range, °F | Environment | Environmental Rating | Specifications Met | Lengths, ft. | 1-99 | 100-Up | |
| 7/16 | 0.56" | 0.71" | 2" | Nylon | Black | -10° to 245° | Damp, Dusty, High-Pressure Washdown, Submersible, Washdown | IP68, IP69K | DIN 5510, DIN EN 60204, UL 1696, UL 94 HB, UL Recognized Component | 0000000 | 00000 | 00000 | |
Crush-Resistant Flexible Plastic Conduit
Thick corrugations make this conduit crush resistant. Also known as mechanical protection tubing (MPT), it withstands vibration, is flame retardant, and resists oil, solvents, and UV light. When used with fittings for flexible plastic conduit, this conduit seals out air and liquid.
Choose-a-Color Flexible Plastic Conduit
Visually identify different runs of wire and cable in machine and equipment wiring. Also known as electrical nonmetallic tubing (ENT), this conduit is often used in areas with tight bends in walls, floors, and ceilings.
Tabs on one end snap into grooves in conduit; the other end attaches to a knockout in an outlet box or enclosure.
Adapters with a threaded end require a locknut (not included) to install in unthreaded holes.
Conduit Connection | Electrical Box Connection | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Conduit Trade Size | Gender | Pipe Size | Thread Type | Gender | For Knockout Trade Size | Material | Color | Each | |
Snap-In Conduit Connection × Snap-In Electrical Box Connection | |||||||||
| 1/2 | Female | __ | __ | Male | 1/2 | PVC | Blue | 0000000 | 00000 |
Snap-In Conduit Connection × Threaded Electrical Box Connection | |||||||||
| 1/2 | Female | 1/2 | NPT | Male | __ | PVC | Blue | 0000000 | 0000 |
Join pieces of conduit by snapping the tabs on each end of these connectors into grooves in the conduit.
Conduit Connection | |||||
|---|---|---|---|---|---|
| Conduit Trade Size | Gender | Material | Color | Each | |
Snap-In Conduit Connection | |||||
| 1/2 | Female | PVC | Blue | 0000000 | 00000 |