Also know as pump connectors, hose is sized to specific lengths for attaching to pumps.

Power away dirt with this heavy duty rubber hose that's also known as as pressure-washer hose.

When your process requires hot water, reach for this rubber hose.

Lighter than rubber and more flexible than PVC, this polyurethane hose stands up to the wear and tear of daily use.

Attach barbed fittings to this hose for use in low-pressure air applications.

Hose is PVC, so it’s lighter and less cumbersome than rubber hose.

Lighter than rubber and more flexible than PVC, this polyurethane hose stands up to the wear and tear of daily use.

This hose withstands the highest pressures of all our air hose for push-on fittings.

Hose is polyurethane so it stretches and flexes more than nylon retracting hose.

Supply air to two power tools without worrying about your lines getting tangled.

Made of polyurethane, this hose stands up to the wear and tear of daily use.

Use this conductive hose in a grounded system to eliminate static buildup. The material is blended with carbon black, which conducts static charges away from the hose walls.

Not only can this hose withstand high temperatures, it won't collapse in low-vacuum applications. It's also known as radiator hose.

Instead of a rubber cover, this hose has a stainless steel braid for excellent strength in high-pressure applications.

When you need access to your line, don’t waste time threading and unthreading your fittings. This hose has a quick-disconnect fitting on both ends.

Rated for low-pressure applications up to 500 psi, this hose works well as a return line in your hydraulic system.

Strong yarn reinforces this hose to give it a higher pressure rating than other food and beverage hose. Also known as brewer’s and vintner’s hose, the hose material is FDA compliant.

Run natural and LP gas through this heavy duty hose that's flexible enough for routing through walls and ceilings.

The fittings are a short length of tubing that inserts into the end of another tube fitting.

Also known as an instrumentation fittings, the Yor-Lok fitting has two sleeves (double ferrules) that bite into metal tubing for a strong seal. The tube stem fitting is a short length of tubing that inserts into the end of another tube fitting.

This general purpose tubing is the industry standard for air and water applications.

Protect sensitive equipment with this tubing—it is specially formulated to reduce the buildup of static electricity.

Stretch it, bend it, compress it – this tubing will spring back to its original shape.

This tubing can handle continuous bending and flexing in applications requiring movement, such as metering (peristaltic) pumps and robotics.

The lightweight, spongy walls provide thermal insulation, so the tubing won’t produce condensation when cold air or fluid runs through it.

This self-extinguishing tubing meets UL 94 V-0 and UL 94 V-1 for flame retardance, so it delays the spread of flames to valuable equipment.

A braid reinforcement gives this tubing excellent strength in high-pressure applications up to 250 psi.

With a unique combination of UV resistance and clarity, this tubing won’t degrade from the damaging effects of ultraviolet light exposure, and allows you to monitor flow through the line.

This resilient tubing won’t crack due to stress or impact.

An FEP liner gives this tubing better chemical resistance than any of our other soft tubing. It also provides a smooth interior for unrestricted flow.

Commonly used in applications requiring movement, such as metering (peristaltic) pumps and robotics, this tubing can handle continuous bending and flexing.

Direct a powerful flow of chemicals, oil, or fuel through hot environments with this tubing. It combines the chemical resistance of Viton® fluoroelastomer with the strength of braided aramid fibers.

Run chemicals through this tubing at temperatures between -450° F and 500° F.

The corrugated design allows this tubing to extend and compress just like an accordion.

This durable tubing has the best abrasion and wear resistance of all our hard tubing for chemicals.

Cold temperatures pose no problems for this tubing—it stays strong and flexible, even when temperatures drop to -100° F.

The industry standard for general purpose food, beverage, and dairy applications, this tubing meets NSF/ANSI Standard 51 for food contact.

Hot food and beverage applications won’t harm this tubing—it can handle temperatures up to 390° F.

Typically used in applications requiring movement, such as metering (peristaltic) pumps and robotics, this tubing can handle repeated bending and flexing.

Route air, liquids, and ingredients around your food processing plants while lowering the risk of contaminating the food. Made of silicone, this tubing has a metal additive that will set off metal detectors to help you comply with Hazard Analysis and Critical Control Point (HACCP) programs.

Tough and durable, this tubing resists abrasion and tearing.

Strong, hard walls give this tubing extra support in high-pressure and vacuum applications.