Hose is SBR rubber, so it stands up to the wear and tear of daily use.

Also know as pump connectors, hose is sized to specific lengths for attaching to pumps.

The cover on this hose meets MSHA (Mine Safety and Health Administration) standards for flame resistance.

Made of PVC, this hose is economical yet durable enough to handle vacuum up to 28 Hg.

Spiral reinforcement on the outside of the hose acts as a wear strip to protect against damage caused by dragging.

Blended rubber construction with extra-strong reinforcement gives this hose strength to transfer large volumes of water in high-vacuum or high-pressure operations.

Drain water from one place to another. Hose lays flat and folds up for carrying and storage.

Attach barbed fittings to this hose for use in low-pressure air applications.

You don’t need a lot of force to bend this low-pressure chemical hose. The extra flexibility makes it good for offset connections and tight spaces.

Made of EPDM rubber reinforced with steel wire so it handles high temperatures, this hose is often used to clean hard-to-reach areas or supply heat and moisture to processing equipment.

Silicone rubber gives this hose, often called radiator hose, the ability to handle high-heat conditions.

With a tighter bend radius than other coolant hose, this hose can twist and turn around equipment.

The PVC construction means this hose won’t impart tastes or odors on your product. Use with juice, milk, meat, poultry, and syrup.

A tough EPDM rubber cover protects the hose from damage. Use hose with juice, meat, milk, poultry, and syrup.

Strong yarn reinforces this hose to give it a higher pressure rating than other food and beverage hose. Also known as brewer’s and vintner’s hose, the hose material is FDA compliant.

The super-smooth interior of this hose prevents product buildup. Use hose with juice, milk, and syrup.

Hose is clear PVC so you can easily monitor flow. Use it with flour, grain, rice, and sugar.

Made of tough Buna-N rubber, this hose has the durability to stand up to gasoline, fuel oil, and other petroleum-based products.

This hose is made of tough gum rubber that stands up to sand, steel shot, and other abrasives.

Connect to high-vacuum pumps to route exhaust fumes out of your work area. Also known as roughing hose.

Also known as pin-rack hose, this hose can be folded to fit in a rack.

A polyester braid is embedded into the walls of this tubing, giving it the strength to withstand higher pressures than other soft tubing for air and water. Use in applications up to 350 psi.

Protect sensitive equipment with this tubing—it is specially formulated to reduce the buildup of static electricity.

Thick walls give this tubing excellent abrasion resistance.

Excellent strength and durability allow this tubing to handle high-pressure air and water applications up to 950 psi.

Hard walls give this tubing excellent strength in high-pressure and vacuum applications.

An internal reinforcement gives this tubing the strength to handle high-pressure applications up to 350 psi.

Not only can this tubing handle the highest temperatures of all our soft tubing for food, beverage, and dairy, it also has superior abrasion and crush resistance. Use in applications up to 450° F.

Combining the heat resistance of metal with the flexibility of fabric, this fiberglass hose has a special coating that stands up to high temperatures.

A nonstick PTFE liner gives this hose the ability to handle corrosive fumes such as smoke, paint fumes, hydrochloric acid fumes, and toluene fumes.

With the smallest bend radius of all the fume hose we offer, this lightweight hose can handle tight turns around equipment.

A good general purpose hose for blowing and vacuum applications, this hose is for use with grinding dust, sawdust, and lint.

The neoprene coating on this hose holds up under high heat.

This white hose makes dirt and other contaminants easy to spot.

The small bend radius makes this hose easy to wrap around corners and install in tight spaces.

Hose has a plastic spiral that acts as a wear strip to protect against damage.

The strongest nonmetal duct hose we offer, this SBR (styrene butadiene rubber) hose is reinforced with yarn and has a metal spiral.

Tough, resilient EVA (ethylene vinyl acetate) offers excellent impact resistance and is long lasting.

Not only is TPU (Thermoplastic polyurethane) tough enough to handle heavy particles and cardboard fibers, the material is clear so you can monitor flow.

Step on or drive over this hose without causing damage.

Run water, mist, oil, and chemicals such as citric and acetic acid through this hose.

Step on this polypropylene hose and the flexible plastic spiral will pop back up unharmed.

Connect to thick-wall plastic pipe fittings for use in heavy duty industrial plumbing and water supply applications, such as water processing, waste water treatment, and irrigation. Pipe can handle pressures up to 900 psi.