Thread Type Thread Type | Show |
---|
For Use With For Use With |
---|
|
|
Maximum Pressure @ Temperature Maximum Pressure@ Temperature |
---|
|
Connection Type Connection Type |
---|
![]() | ![]() |
Hose | Pipe |
![]() | |
Ball Socket |
Maximum Temperature Maximum Temperature |
---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
---|
Internal Reinforcement Internal Reinforcement |
---|
|
Clarity Clarity |
---|
![]() | Opaque |
Interior Texture Interior Texture |
---|
|
Bend Radius Bend Radius |
---|
|
About Loc-Line and Snap-Loc Coolant Hose


Assemble and disassemble Loc-Line and Snap-Loc coolant hose by snapping components together or pulling them apart. Assembly and separation tools (sold separately) are recommended.
To ensure compatibility, select the color and trade size that match your current system. A system’s trade size is equal to the ID of its hose.
About Hose
More
Air Hose with Male Threaded Fittings

- Temperature Range: -40° to 200° F
- Material: EPDM Rubber
- Color: Black or Red
Hose is made of EPDM rubber, which is the most common material for air applications.
For any combination of hose length and fittings not listed in the table, please select 5138K999. Specify hose color (red or black) and length, and fitting type, material, and size on both ends.
Reels with Air Hose with Threaded Fittings

Hose is EPDM rubber, which is the most common material for air applications. It locks in place when pulled out of the reel, and it retracts with a quick tug.
Reels with 6" Lg. x 6" Wd. mounting base are for applications where the hose is pulled straight out of the reel.
For reels with multiple mounting options (ceiling, floor, and wall), additional mounting brackets are sold separately that allow them to pivot or mount to a beam.
Reel | Hose | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Ht. | Wd. | Dp. | Pipe Size | Fittings | ID | OD | Lg., ft. | Max. Pressure | Mounting Location | Hose Color | Each | |
EPDM Rubber Hose | ||||||||||||
6" Lg. × 5" Wd. Mounting Base | ||||||||||||
14 7/8" | 5 7/8" | 13 1/2" | 1/4 × 1/4 | Brass BSPT Male × Brass BSPT Female | 1/4" | 1/2" | 25 | 300 psi @ 72° F | Ceiling, Floor, Wall | Red | 0000000 | 0000000 |
14 7/8" | 6 1/2" | 13 1/2" | 3/8 × 3/8 | Brass BSPT Male × Brass BSPT Female | 3/8" | 11/16" | 25 | 300 psi @ 72° F | Ceiling, Floor, Wall | Red | 0000000 | 000000 |
6" Lg. × 6" Wd. Mounting Base | ||||||||||||
18 5/8" | 6 3/4" | 17 1/8" | 1/4 × 1/4 | Brass BSPT Male × Brass BSPT Female | 1/4" | 1/2" | 50 | 300 psi @ 72° F | Ceiling, Floor, Wall | Red | 0000000 | 000000 |
18 5/8" | 6 3/4" | 17 1/8" | 3/8 × 3/8 | Brass BSPT Male × Brass BSPT Female | 3/8" | 11/16" | 50 | 300 psi @ 72° F | Ceiling, Floor, Wall | Red | 0000000 | 000000 |
18 5/8" | 7" | 17 1/8" | 1/2 × 1/2 | Brass BSPT Male × Brass BSPT Female | 1/2" | 13/16" | 25 | 300 psi @ 72° F | Ceiling, Floor, Wall | Red | 0000000 | 000000 |
18 5/8" | 7" | 17 1/8" | 1/2 × 1/2 | Brass BSPT Male × Brass BSPT Female | 1/2" | 13/16" | 50 | 300 psi @ 72° F | Ceiling, Floor, Wall | Red | 0000000 | 000000 |
6" Lg. × 6" Wd. Mounting Base with Two Arms | ||||||||||||
18 5/8" | 6 3/4" | 17 1/8" | 3/8 × 3/8 | Brass BSPT Male × Brass BSPT Female | 3/8" | 11/16" | 50 | 300 psi @ 72° F | Ceiling, Floor, Wall | Red | 0000000 | 000000 |
18 5/8" | 7" | 17 1/8" | 1/2 × 1/2 | Brass BSPT Male × Brass BSPT Female | 1/2" | 13/16" | 50 | 300 psi @ 72° F | Ceiling, Floor, Wall | Red | 0000000 | 000000 |
Lightweight Air Hose with Male Threaded Fittings

- Temperature Range: -10° to 155° F
- Material: PVC
- Color: Blue, Gray, Red, or Yellow
Hose is PVC, so it's light and easy to handle.
For any combination of hose length and fittings not listed in the table, please select 5138K999. Specify hose color (blue, gray, red, or yellow) and length, and fitting type, material, and size on both ends.
For technical drawings and 3-D models, click on a part number.
Enclosed Reels with Lightweight Air Hose

Protect your hose when it's not in use. Hose locks in place when pulled out of the reel, and retracts with a quick tug.
Polyurethane rubber hose stretches and flexes for easy maneuverability. Its reel includes a mounting bracket that lets you rotate the reel up to 300°.
For technical drawings and 3-D models, click on a part number.
Reel | Hose | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Ht. | Wd. | Dp. | Pipe Size | Fittings | ID | OD | Lg., ft. | Max. Pressure | Color | Each | |
Polyurethane Rubber Hose | |||||||||||
9 3/8" Lg. × 2" Wd. Mounting Base | |||||||||||
12 3/8" | 13 1/2" | 7 1/2" | 1/4 × 1/4 | Brass Threaded BSPT Male × Brass Threaded BSPT Male | 5/16" | 1/2" | 20 | 230 psi @ 72° F | Blue | 0000000 | 0000000 |
12 3/8" | 13 1/2" | 7 1/2" | 1/4 × 1/4 | Brass Threaded BSPT Male × Brass Threaded BSPT Male | 5/16" | 1/2" | 30 | 230 psi @ 72° F | Blue | 0000000 | 000000 |
12 3/8" | 13 1/2" | 7 1/2" | 1/2 × 1/2 | Brass Threaded BSPT Male × Brass Threaded BSPT Male | 7/16" | 5/8" | 15 | 230 psi @ 72° F | Blue | 0000000 | 000000 |
16 1/8" | 16 3/4" | 7 1/2" | 3/8 × 3/8 | Brass Threaded BSPT Male × Brass Threaded BSPT Male | 3/8" | 1/2" | 45 | 230 psi @ 72° F | Blue | 0000000 | 000000 |
16 1/8" | 16 3/4" | 7 1/2" | 1/2 × 1/2 | Brass Threaded BSPT Male × Brass Threaded BSPT Male | 7/16" | 5/8" | 30 | 170 psi @ 72° F | Blue | 0000000 | 000000 |
Flexible Retracting Air Hose

Hose is polyurethane so it stretches and flexes more than nylon retracting hose. Fittings that swivel until tightened are easy to install. The length listed is the usable length. The extended length will be longer.
Hose with nickel-plated brass fittings resists corrosion better than hose with plain brass fittings.
- Temperature Range: 0° to 140° F
- Maximum Vacuum: Not Rated
- Material: Polyurethane
- Color: Blue
- Both Fittings Continuous Swivel
Pipe Size | ID | OD | Coil OD | Max. Pressure | Color | Each | |
6-ft. Lengths | |||||||
---|---|---|---|---|---|---|---|
1/4 × 1/4 | 6.5mm | 10mm | 2" | 145 psi @ 72° F | Blue | 00000000 | 000000 |
3/8 × 3/8 | 8mm | 12mm | 2 1/2" | 145 psi @ 72° F | Blue | 00000000 | 00000 |
13-ft. Lengths | |||||||
1/4 × 1/4 | 6.5mm | 10mm | 2" | 145 psi @ 72° F | Blue | 00000000 | 00000 |
3/8 × 3/8 | 8mm | 12mm | 2 1/2" | 145 psi @ 72° F | Blue | 00000000 | 00000 |
19-ft. Lengths | |||||||
1/4 × 1/4 | 6.5mm | 10mm | 2" | 145 psi @ 72° F | Blue | 00000000 | 00000 |
3/8 × 3/8 | 8mm | 12mm | 2 1/2" | 145 psi @ 72° F | Blue | 00000000 | 00000 |
26-ft. Lengths | |||||||
1/4 × 1/4 | 6.5mm | 10mm | 2" | 145 psi @ 72° F | Blue | 00000000 | 00000 |
3/8 × 3/8 | 8mm | 12mm | 2 1/2" | 145 psi @ 72° F | Blue | 00000000 | 000000 |
1/4" Loc-Line Coolant Hose

Build a custom system to deliver coolant, cutting oil, water, or air in any direction. Once in position, hose stays put—there's no spring back or movement caused by vibration or heavy flow.
Assemble and disassemble by snapping components together or pulling them apart. Assembly pliers (sold separately) are recommended. To ensure compatibility, select the color and trade size that match your current system. These components fit Loc-Line hose with a 1/4” ID.
Connectors are required to join components. Coolant supply connectors join components to coolant supply lines.
For technical drawings and 3-D models, click on a part number.

Pipe Connection | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Style | Hose Connection Gender | Size | Thread Type | Gender | Material | Max. Flow Rate, gph | Max. Pressure, psi | Max. Temp., °F | Pkg. Qty. | Pkg. | |
2 | Male | 1/4 | BSPT | Male | Acetal Plastic | 250 | 30 | 170° | 4 | 000000000 | 00000 |
1/2" Loc-Line Coolant Hose

Build a custom system to deliver coolant, cutting oil, water, or air in any direction. Once in position, hose stays put—there’s no spring back or movement caused by vibration or heavy flow.
Assemble and disassemble by snapping components together or pulling them apart. Assembly pliers (sold separately) are recommended. To ensure compatibility, select the color and trade size that match your current system. These components fit Loc-Line hose with a 1/2" ID.
Connectors are required to join components. Coolant supply connectors join components to your coolant supply lines.
For technical drawings and 3-D models, click on a part number.
3/4" Loc-Line Coolant Hose

Build a custom system to deliver coolant, cutting oil, water, or air in any direction. Once in position, hose stays put—there’s no spring back or movement caused by vibration or heavy flow.
Assemble and disassemble by snapping components together or pulling them apart. Assembly pliers (sold separately) are recommended. To ensure compatibility, select the color and trade size that match your current system. These components fit Loc-Line hose with a 3/4" ID.
Connectors are required to join components. Coolant supply connectors join components to your coolant supply lines.
For technical drawings and 3-D models, click on a part number.

Pipe Connection | |||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
Style | Hose Connection Gender | Size | Thread Type | Gender | Material | Max. Flow Rate, gph | Max. Pressure, psi | Max. Temp., °F | Pkg. Qty. | Pkg. | |
2 | Male | 3/4 | BSPT | Male | Acetal Plastic | 1,140 | 10 | 170° | 4 | 000000000 | 00000 |
1/4" Snap-Loc Coolant Hose

Build a custom system to deliver coolant, cutting oil, water, or air in any direction. Once in position, hose stays put—there’s no spring back or movement caused by vibration or heavy flow.
Assemble and disassemble by snapping components together or pulling them apart. Assembly and separation tools (sold separately) are recommended. To ensure compatibility, select the color and trade size that match your current system. These components fit Snap-Loc hose with a 1/4" ID.
Connectors are required to join components. Coolant supply connectors join components to your coolant supply lines.
For technical drawings and 3-D models, click on a part number.
1/2" Snap-Loc Coolant Hose

Build a custom system to deliver coolant, cutting oil, water, or air in any direction. Once in position, hose stays put—there’s no spring back or movement caused by vibration or heavy flow.
Assemble and disassemble by snapping components together or pulling them apart. Assembly and separation tools (sold separately) are recommended. To ensure compatibility, select the color and trade size that match your current system. These components fit Snap-Loc hose with a 1/2" ID.
Connectors are required to join components. Coolant supply connectors join components to your coolant supply lines.
For technical drawings and 3-D models, click on a part number.
Machine-Mount Coolant Nozzles with Threaded Connection


These nozzles handle coolant pressure up to 150 psi. Push on the nozzle to adjust the angle of the coolant stream.
Nozzles with NPT and BSPT threads will fit both NPT and BSPT threaded holes.
For technical drawings and 3-D models, click on a part number.
Material | Each | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size | Spray Pattern | Orifice Dia. | Lg. | Tip Lg. | Wd. | Body | Ball | Tip | Max. Flow Rate, gpm | Max.Temp., °F | Features | 1-4 | 5-Up | |
For Use With Air, Coolant, Cutting Oil, Water | ||||||||||||||
NPT, BSPT Male | ||||||||||||||
1/16 | Stream | 0.09" | 0.69" | 0.25" | 0.50" | Acetal Plastic | Stainless Steel | Stainless Steel | 2 | 160° | 360° Swivel | 00000000 | 000000 | 000000 |
1/16 | Stream | 0.09" | 0.69" | 0.5" | 0.50" | Acetal Plastic | Stainless Steel | Stainless Steel | 2 | 160° | 360° Swivel | 00000000 | 00000 | 00000 |
1/16 | Stream | 0.09" | 0.69" | 1.25" | 0.50" | Acetal Plastic | Stainless Steel | Stainless Steel | 2 | 160° | 360° Swivel | 00000000 | 00000 | 00000 |
1/16 | Stream | 0.11" | 0.69" | __ | 0.50" | Acetal Plastic | Stainless Steel | __ | 3.6 | 160° | 360° Swivel | 00000000 | 00000 | 00000 |
1/16 | Stream | 0.11" | 0.69" | 1.25" | 0.50" | Acetal Plastic | Stainless Steel | Stainless Steel | 3.6 | 160° | 360° Swivel | 00000000 | 00000 | 00000 |
1/16 | Stream | 0.16" | 0.69" | __ | 0.50" | Acetal Plastic | Stainless Steel | __ | 7.6 | 160° | 360° Swivel | 00000000 | 00000 | 00000 |
1/8 | Stream | 0.11" | 0.82" | __ | 0.63" | Acetal Plastic | Stainless Steel | __ | 3.6 | 160° | 360° Swivel | 000000 | 00000 | 00000 |
1/8 | Stream | 0.11" | 0.82" | 0.25" | 0.63" | Acetal Plastic | Stainless Steel | Stainless Steel | 3.6 | 160° | 360° Swivel | 000000 | 00000 | 00000 |
1/8 | Stream | 0.11" | 0.82" | 0.5" | 0.63" | Acetal Plastic | Stainless Steel | Stainless Steel | 3.6 | 160° | 360° Swivel | 0000000 | 00000 | 00000 |
1/8 | Stream | 0.11" | 0.82" | 1.25" | 0.63" | Acetal Plastic | Stainless Steel | Stainless Steel | 3.6 | 160° | 360° Swivel | 00000000 | 00000 | 00000 |
1/8 | Stream | 0.16" | 0.82" | __ | 0.63" | Acetal Plastic | Stainless Steel | __ | 7.6 | 160° | 360° Swivel | 00000000 | 00000 | 00000 |
1/8 | Stream | 0.16" | 0.82" | 0.5" | 0.63" | Acetal Plastic | Stainless Steel | Stainless Steel | 7.6 | 160° | 360° Swivel | 0000000 | 00000 | 00000 |
1/8 | Stream | 0.16" | 0.82" | 1.25" | 0.63" | Acetal Plastic | Stainless Steel | Stainless Steel | 7.6 | 160° | 360° Swivel | 0000000 | 00000 | 00000 |
1/8 | Stream | 5mm | 0.82" | __ | 0.63" | Acetal Plastic | Stainless Steel | __ | 11.6 | 160° | 360° Swivel | 00000000 | 00000 | 00000 |
1/4 | Stream | 0.11" | 0.94" | __ | 0.75" | Acetal Plastic | Stainless Steel | __ | 3.6 | 160° | 360° Swivel | 00000000 | 00000 | 00000 |
1/4 | Stream | 0.11" | 0.94" | 0.25" | 0.75" | Acetal Plastic | Stainless Steel | Stainless Steel | 3.6 | 160° | 360° Swivel | 00000000 | 00000 | 00000 |
1/4 | Stream | 0.11" | 0.94" | 0.5" | 0.75" | Acetal Plastic | Stainless Steel | Stainless Steel | 3.6 | 160° | 360° Swivel | 00000000 | 00000 | 00000 |
1/4 | Stream | 0.16" | 0.94" | __ | 0.75" | Acetal Plastic | Stainless Steel | __ | 7.6 | 160° | 360° Swivel | 000000 | 00000 | 00000 |
1/4 | Stream | 0.16" | 0.94" | 0.5" | 0.75" | Acetal Plastic | Stainless Steel | Stainless Steel | 7.6 | 160° | 360° Swivel | 0000000 | 00000 | 00000 |
1/4 | Stream | 0.16" | 0.94" | 1.25" | 0.75" | Acetal Plastic | Stainless Steel | Stainless Steel | 7.6 | 160° | 360° Swivel | 0000000 | 00000 | 00000 |
1/4 | Stream | 5mm | 0.94" | __ | 0.75" | Acetal Plastic | Stainless Steel | __ | 11.6 | 160° | 360° Swivel | 00000000 | 00000 | 00000 |
3/8 | Stream | 0.11" | 1.13" | __ | 0.88" | Acetal Plastic | Stainless Steel | __ | 3.6 | 160° | 360° Swivel | 00000000 | 00000 | 00000 |
3/8 | Stream | 0.11" | 1.13" | 1.25" | 0.88" | Acetal Plastic | Stainless Steel | Stainless Steel | 3.6 | 160° | 360° Swivel | 00000000 | 00000 | 00000 |
3/8 | Stream | 0.16" | 1.13" | 0.5" | 0.88" | Acetal Plastic | Stainless Steel | Stainless Steel | 7.6 | 160° | 360° Swivel | 00000000 | 00000 | 00000 |
3/8 | Stream | 0.16" | 1.13" | 1.25" | 0.88" | Acetal Plastic | Stainless Steel | Stainless Steel | 7.6 | 160° | 360° Swivel | 00000000 | 00000 | 00000 |
3/8 | Stream | 0.22" | 1.13" | __ | 0.88" | Acetal Plastic | Stainless Steel | __ | 14.4 | 160° | 360° Swivel | 000000 | 00000 | 00000 |
3/8 | Stream | 0.22" | 1.13" | 0.5" | 0.88" | Acetal Plastic | Stainless Steel | Stainless Steel | 14.4 | 160° | 360° Swivel | 00000000 | 00000 | 00000 |
3/8 | Stream | 0.22" | 1.13" | 1.25" | 0.88" | Acetal Plastic | Stainless Steel | Stainless Steel | 14.4 | 160° | 360° Swivel | 0000000 | 00000 | 00000 |
3/8 | Stream | 6mm | 1.13" | __ | 0.88" | Acetal Plastic | Stainless Steel | __ | 16.6 | 160° | 360° Swivel | 00000000 | 00000 | 00000 |
High-Pressure Machine-Mount Coolant Nozzles with Threaded Connection


For use in the highest pressure coolant lines, these nozzles are rated for at least 1,000 psi. They fit both NPT and BSPT threaded holes.
Use an adjustment tool (sold separately) to push on the nozzle tip to adjust the angle of the coolant stream.
For technical drawings and 3-D models, click on a part number.
Pipe Connection | Material | Each | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Thread Type | Gender | Spray Pattern | Orifice Dia. | Lg. | Tip Lg. | Wd. | Body | Tip | Max. Flow Rate, gpm | Max. Temp., °F | 1-4 | 5-Up | |
For Use With Air, Coolant, Cutting Oil, Water | ||||||||||||||
1,000 psi Max. Pressure | ||||||||||||||
1/4 | NPT, BSPT | Male | Stream | 0.06" | 1.27" | 0" | 0.69" | Acetal Plastic | Stainless Steel | 2.2 | 115° | 0000000 | 000000 | 000000 |
1/4 | NPT, BSPT | Male | Stream | 0.06" | 1.27" | 1.25" | 0.69" | Acetal Plastic | Stainless Steel | 2.2 | 115° | 0000000 | 00000 | 00000 |
1/4 | NPT, BSPT | Male | Stream | 0.06" | 1.65" | 0.25" | 0.69" | Acetal Plastic | Stainless Steel | 2.2 | 115° | 0000000 | 00000 | 00000 |
1/4 | NPT, BSPT | Male | Stream | 0.06" | 1.65" | 1.25" | 0.69" | Acetal Plastic | Stainless Steel | 2.2 | 115° | 0000000 | 00000 | 00000 |
1/4 | NPT, BSPT | Male | Stream | 0.09" | 1.27" | 0" | 0.69" | Acetal Plastic | Stainless Steel | 5.2 | 115° | 0000000 | 00000 | 00000 |
1/4 | NPT, BSPT | Male | Stream | 0.09" | 1.27" | 1.25" | 0.69" | Acetal Plastic | Stainless Steel | 5.2 | 115° | 0000000 | 00000 | 00000 |
1/4 | NPT, BSPT | Male | Stream | 0.09" | 1.65" | 0.25" | 0.69" | Acetal Plastic | Stainless Steel | 5.2 | 115° | 0000000 | 00000 | 00000 |
1/4 | NPT, BSPT | Male | Stream | 0.09" | 1.65" | 1.25" | 0.69" | Acetal Plastic | Stainless Steel | 5.2 | 115° | 0000000 | 00000 | 00000 |
1/4 | NPT, BSPT | Male | Stream | 0.12" | 1.27" | 0" | 0.69" | Acetal Plastic | Stainless Steel | 8.9 | 115° | 0000000 | 00000 | 00000 |
1/4 | NPT, BSPT | Male | Stream | 0.12" | 1.27" | 1.25" | 0.69" | Acetal Plastic | Stainless Steel | 8.9 | 115° | 0000000 | 00000 | 00000 |
1/4 | NPT, BSPT | Male | Stream | 0.12" | 1.65" | 0.25" | 0.69" | Acetal Plastic | Stainless Steel | 8.9 | 115° | 0000000 | 00000 | 00000 |
1/4 | NPT, BSPT | Male | Stream | 0.12" | 1.65" | 1.25" | 0.69" | Acetal Plastic | Stainless Steel | 8.9 | 115° | 0000000 | 00000 | 00000 |
1/4 | NPT, BSPT | Male | Stream | 0.16" | 1.27" | 0" | 0.69" | Acetal Plastic | Stainless Steel | 19.8 | 115° | 0000000 | 00000 | 00000 |
1/4 | NPT, BSPT | Male | Stream | 0.16" | 1.27" | 1.25" | 0.69" | Acetal Plastic | Stainless Steel | 19.8 | 115° | 0000000 | 00000 | 00000 |
1/4 | NPT, BSPT | Male | Stream | 0.16" | 1.65" | 0.25" | 0.69" | Acetal Plastic | Stainless Steel | 19.8 | 115° | 0000000 | 00000 | 00000 |
1/4 | NPT, BSPT | Male | Stream | 0.16" | 1.65" | 1.25" | 0.69" | Acetal Plastic | Stainless Steel | 19.8 | 115° | 0000000 | 00000 | 00000 |
1,500 psi Max. Pressure | ||||||||||||||
1/8 | NPT, BSPT | Male | Stream | 0.09" | 0.81" | 0.25" | 0.56" | Brass | Stainless Steel | 6.3 | 160° | 0000000 | 00000 | 00000 |
1/8 | NPT, BSPT | Male | Stream | 0.09" | 0.81" | 1.25" | 0.56" | Brass | Stainless Steel | 6.3 | 160° | 0000000 | 00000 | 00000 |
1/8 | NPT, BSPT | Male | Stream | 0.12" | 0.81" | 0.25" | 0.56" | Brass | Stainless Steel | 10.9 | 160° | 0000000 | 00000 | 00000 |
1/8 | NPT, BSPT | Male | Stream | 0.12" | 0.81" | 1.25" | 0.56" | Brass | Stainless Steel | 10.9 | 160° | 0000000 | 00000 | 00000 |
1/4 | NPT, BSPT | Male | Stream | 0.12" | 0.94" | 0.25" | 0.63" | Brass | Stainless Steel | 10.9 | 160° | 0000000 | 00000 | 00000 |
1/4 | NPT, BSPT | Male | Stream | 0.12" | 0.94" | 1.25" | 0.63" | Brass | Stainless Steel | 10.9 | 160° | 0000000 | 00000 | 00000 |
1/4 | NPT, BSPT | Male | Stream | 0.16" | 0.94" | 0.5" | 0.63" | Brass | Stainless Steel | 24.3 | 160° | 0000000 | 00000 | 00000 |
1/4 | NPT, BSPT | Male | Stream | 0.16" | 0.94" | 1.25" | 0.63" | Brass | Stainless Steel | 24.3 | 160° | 0000000 | 00000 | 00000 |
Adjustment Tool | 0000000 | Each | 00000 |
Adjustable-Spray Machine-Mount Coolant Nozzles with Threaded Connection

The most versatile of our machine-mount coolant nozzles, these adjust from a fine mist to a direct stream and can deliver coolant in any direction. Max. pressure is 100 psi. Twist the tip to change the spray pattern or to stop flow completely. Nozzles pivot up and down and rotate 360° for positioning. They fit both NPT and BSPT threaded holes.
For technical drawings and 3-D models, click on a part number.
Pipe Connection | Material | Each | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Size | Thread Type | Gender | Spray Pattern | Orifice Dia. | Lg. | Tip Lg. | Wd. | Body | Tip | Max. Flow Rate, gpm | Max. Temp., °F | 1-4 | 5-Up | |
For Use With Air, Coolant, Cutting Oil, Water | ||||||||||||||
1/8 | NPT, BSPT | Male | Mist, Stream | 0.16" | 1.5" | 1.7" | 0.87" | Acetal Plastic | Acetal Plastic | 6.2 | 160° | 000000 | 000000 | 000000 |
1/4 | NPT, BSPT | Male | Mist, Stream | 0.16" | 1.5" | 1.7" | 0.87" | Acetal Plastic | Acetal Plastic | 6.2 | 160° | 000000 | 00000 | 00000 |
Coolant Hose and Nozzle Adapters


Snap these adapters into the ball-socket connections on CNC machines to connect threaded coolant hose and nozzles to coolant supply ports.
For technical drawings and 3-D models, click on a part number.
Pipe Connection | Each | ||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|
For Ball Socket Dia. | Gender | Size | Thread Type | Gender | Lg. | Body Material | Max. Pressure, psi | Max. Temp., °F | 1-4 | 5-Up | |
For Use With Air, Coolant, Cutting Oil, Water | |||||||||||
1/2" | Male | 1/8 | NPT, BSPT | Female | 0.94" | Acetal Plastic | 150 | 160° | 0000000 | 00000 | 00000 |
12mm | Male | 1/8 | NPT, BSPT | Female | 0.91" | Acetal Plastic | 150 | 160° | 0000000 | 0000 | 0000 |
14mm | Male | 1/8 | NPT, BSPT | Female | 0.38" | Acetal Plastic | 150 | 160° | 0000000 | 0000 | 0000 |
15mm | Male | 1/8 | NPT, BSPT | Female | 0.43" | Acetal Plastic | 150 | 160° | 0000000 | 0000 | 0000 |