About Accident Prevention Signs
More
Hazardous Material Signs
Alert workers to the presence of chemicals, combustible liquids and gases, and other hazardous materials.
Danger headers are typically used in extreme conditions to indicate an imminently hazardous situation that, if not avoided, will result in death or serious injury. Signs that meet OSHA Compliant 29 CFR 1910.145 comply with safety color standards for indicating hazards.
For technical drawings and 3-D models, click on a part number.
Mounting | Each | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Thick. | Fasteners Included | Number of Holes | Hole Diameter | Specifications Met | 1-5 | 6-Up | |
Danger—Hot (English) | |||||||||
Adhesive Back—Polypropylene Plastic | |||||||||
| 7" | 10" | 0.004" | __ | __ | __ | OSHA Compliant 29 CFR 1910.145 | 000000000 | 000000 | 00000 |
| 10" | 14" | 0.004" | __ | __ | __ | OSHA Compliant 29 CFR 1910.145 | 000000000 | 00000 | 00000 |
| 14" | 20" | 0.004" | __ | __ | __ | OSHA Compliant 29 CFR 1910.145 | 000000000 | 00000 | 00000 |
Adhesive Back—Reflective Polyester Plastic | |||||||||
| 7" | 10" | 0.004" | __ | __ | __ | OSHA Compliant 29 CFR 1910.145 | 0000000 | 00000 | 00000 |
| 10" | 14" | 0.004" | __ | __ | __ | OSHA Compliant 29 CFR 1910.145 | 0000000 | 00000 | 00000 |
Magnetic Back—Vinyl Plastic | |||||||||
| 7" | 10" | 0.032" | __ | __ | __ | OSHA Compliant 29 CFR 1910.145 | 0000000 | 00000 | 00000 |
| 10" | 14" | 0.032" | __ | __ | __ | OSHA Compliant 29 CFR 1910.145 | 0000000 | 00000 | 00000 |
With Mounting Holes—Polyethylene Plastic | |||||||||
| 7" | 10" | 0.055" | No | 4 | 3/16" | OSHA Compliant 29 CFR 1910.145 | 0000000 | 00000 | 00000 |
| 10" | 14" | 0.055" | No | 4 | 3/16" | OSHA Compliant 29 CFR 1910.145 | 0000000 | 00000 | 00000 |
| 14" | 20" | 0.055" | No | 4 | 3/16" | OSHA Compliant 29 CFR 1910.145 | 00000000 | 00000 | 00000 |
With Mounting Holes—Aluminum | |||||||||
| 7" | 10" | 0.04" | No | 4 | 3/16" | OSHA Compliant 29 CFR 1910.145 | 0000000 | 00000 | 00000 |
| 10" | 14" | 0.04" | No | 4 | 3/16" | OSHA Compliant 29 CFR 1910.145 | 0000000 | 00000 | 00000 |
| 14" | 20" | 0.04" | No | 4 | 3/16" | OSHA Compliant 29 CFR 1910.145 | 00000000 | 00000 | 00000 |
Danger—Hot/Peligro—Caliente (English/Spanish) | |||||||||
Adhesive Back—Polypropylene Plastic | |||||||||
| 14" | 10" | 0.004" | __ | __ | __ | OSHA Compliant 29 CFR 1910.145 | 000000000 | 00000 | 00000 |
| 20" | 14" | 0.004" | __ | __ | __ | OSHA Compliant 29 CFR 1910.145 | 000000000 | 00000 | 00000 |
With Mounting Holes—Polyethylene Plastic | |||||||||
| 14" | 10" | 0.055" | No | 4 | 3/16" | OSHA Compliant 29 CFR 1910.145 | 00000000 | 00000 | 00000 |
| 20" | 14" | 0.055" | No | 4 | 3/16" | OSHA Compliant 29 CFR 1910.145 | 00000000 | 00000 | 00000 |
With Mounting Holes—Aluminum | |||||||||
| 14" | 10" | 0.04" | No | 4 | 3/16" | OSHA Compliant 29 CFR 1910.145 | 00000000 | 00000 | 00000 |
| 20" | 14" | 0.04" | No | 4 | 3/16" | OSHA Compliant 29 CFR 1910.145 | 00000000 | 00000 | 00000 |
Illustrated Hazardous Material Signs
The illustrations on these signs help workers identify hazards at a glance. All signs meet OSHA safety color standards for indicating hazards.
Danger headers are typically used in extreme conditions to indicate an imminently hazardous situation that, if not avoided, will result in death or serious injury.
Mounting | Each | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Thick. | Fasteners Included | Number of Holes | Hole Dia. | Specifications Met | 1-5 | 6-Up | |
Adhesive Back—Polypropylene Plastic | |||||||||
| 14" | 10" | 0.004" | __ | __ | __ | ANSI Z535, OSHA Compliant 29 CFR 1910.145 | 000000000 | 000000 | 000000 |
With Mounting Holes—Polyethylene Plastic | |||||||||
| 14" | 10" | 0.055" | No | 4 | 3/16" | ANSI Z535, OSHA Compliant 29 CFR 1910.145 | 000000000 | 00000 | 00000 |
Illustrated Machine and Equipment Operation Labels
Identify hazards at a glance with the headers and illustrations on these labels. They meet OSHA 29 CFR 1910.145 safety color standards for indicating hazards.
Danger headers are used in extreme conditions to indicate an imminently hazardous situation that, if not avoided, will result in death or serious injury.
Warning headers indicate a moderately hazardous situation that, if not avoided, may result in death or serious injury.
Caution headers indicate a potentially hazardous situation that, if not avoided, may result in minor or moderate injury.
Labels that meet ANSI Z535 adhere to standards for identifying a hazard and describing how to avoid it.
| Ht. | Wd. | Mount Type | Material | Temp. Range, °F | Specifications Met | Pkg. Qty. | Pkg. | |
| 2 1/2" | 1 3/4" | Adhesive Back | Polyester Plastic | -40° to 300° | OSHA Compliant 29 CFR 1910.145, ANSI Z535 | 10 | 00000000 | 000000 |
| 3 1/2" | 2 1/2" | Adhesive Back | Polyester Plastic | -40° to 300° | OSHA Compliant 29 CFR 1910.145, ANSI Z535 | 5 | 00000000 | 00000 |
| 5" | 3 1/2" | Adhesive Back | Polyester Plastic | -40° to 300° | OSHA Compliant 29 CFR 1910.145, ANSI Z535 | 5 | 00000000 | 00000 |
| Ht. | Wd. | Mount Type | Material | Temp. Range, °F | Specifications Met | Pkg. Qty. | Pkg. | |
| 2 1/2" | 1 3/4" | Adhesive Back | Polyester Plastic | -40° to 300° | ANSI Z535, OSHA Compliant 29 CFR 1910.145 | 10 | 00000000 | 000000 |
| 3 1/2" | 5" | Adhesive Back | Vinyl Plastic | -40° to 170° | OSHA Compliant 29 CFR 1910.145 | 5 | 0000000 | 00000 |
| 5" | 3 1/2" | Adhesive Back | Polyester Plastic | -40° to 300° | ANSI Z535, OSHA Compliant 29 CFR 1910.145 | 5 | 00000000 | 00000 |
| Ht. | Wd. | Mount Type | Material | Temp. Range, °F | Specifications Met | Pkg. Qty. | Pkg. | |
| 2 1/2" | 1 3/4" | Adhesive Back | Polyester Plastic | -40° to 300° | OSHA Compliant 29 CFR 1910.145, ANSI Z535 | 10 | 0000000 | 000000 |
| 3 1/2" | 2 1/2" | Adhesive Back | Polyester Plastic | -40° to 300° | OSHA Compliant 29 CFR 1910.145, ANSI Z535 | 5 | 00000000 | 00000 |
| 5" | 3 1/2" | Adhesive Back | Polyester Plastic | -40° to 300° | OSHA Compliant 29 CFR 1910.145, ANSI Z535 | 5 | 0000000 | 00000 |
| Ht. | Wd. | Mount Type | Material | Temp. Range, °F | Specifications Met | Pkg. Qty. | Pkg. | |
| 2 1/2" | 1 3/4" | Adhesive Back | Polyester Plastic | -40° to 300° | OSHA Compliant 29 CFR 1910.145, ANSI Z535 | 10 | 00000000 | 000000 |
| 3 1/2" | 2 1/2" | Adhesive Back | Polyester Plastic | -40° to 300° | OSHA Compliant 29 CFR 1910.145, ANSI Z535 | 5 | 00000000 | 00000 |
| 5" | 3 1/2" | Adhesive Back | Polyester Plastic | -40° to 300° | OSHA Compliant 29 CFR 1910.145, ANSI Z535 | 5 | 00000000 | 00000 |
| Ht. | Wd. | Mount Type | Material | Temp. Range, °F | Specifications Met | Pkg. Qty. | Pkg. | |
| 2 1/2" | 1 3/4" | Adhesive Back | Polyester Plastic | -40° to 300° | OSHA Compliant 29 CFR 1910.145, ANSI Z535 | 10 | 0000000 | 000000 |
| 3 1/2" | 2 1/2" | Adhesive Back | Polyester Plastic | -40° to 300° | OSHA Compliant 29 CFR 1910.145, ANSI Z535 | 5 | 00000000 | 00000 |
| 5" | 3 1/2" | Adhesive Back | Polyester Plastic | -40° to 300° | OSHA Compliant 29 CFR 1910.145, ANSI Z535 | 5 | 0000000 | 00000 |
Machine and Equipment Operation Labels
Communicate dangers to workers near equipment that could cause injury. About the size of an index card, these labels have an adhesive backing, so you can peel and stick them onto machinery, walls, and anywhere else they’re needed.
Labels with danger, warning, and caution headers meet OSHA 29 CFR 1910.145 safety color standards for indicating hazards that could harm workers. Danger headers are typically used in extreme conditions to indicate an imminently hazardous situation that, if not avoided, will result in death or serious injury.
| Ht. | Wd. | Mount Type | Material | Temp. Range, °F | Specifications Met | Pkg. Qty. | Pkg. | |
Danger—Hot | ||||||||
|---|---|---|---|---|---|---|---|---|
| 3 1/2" | 5" | Adhesive Back | Vinyl Plastic | -40° to 170° | OSHA Compliant 29 CFR 1910.145 | 5 | 0000000 | 000000 |
Machine and Equipment Operation ISO Labels
Add hazard symbols to an existing label or use alone to communicate hazards at a glance. Labels meet ISO, OSHA, and ANSI safety color standards for indicating hazards.
| Ht. | Wd. | Thick. | Mount Type | Material | Temp. Range, °F | Specifications Met | Pkg. Qty. | Pkg. | |
Hot Surface Hazard Symbol | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| 2" | 2 1/4" | 0.005" | Adhesive Back | Polyester Plastic | -40° to 300° | ISO 3864, OSHA Compliant 29 CFR 1910.145, ANSI Z535 | 5 | 000000 | 000000 |
Weather-Resistant Machine and Equipment Operation Tags
Tags are laminated in plastic so they hold up outdoors. Use them to communicate dangers to workers near equipment that could cause injury. Write on them using a permanent marker. All tags meet OSHA safety color standards for indicating hazards. Attach them with an included cable tie.
Danger headers are typically used in extreme conditions to indicate an imminently hazardous situation that, if not avoided, will result in death or serious injury.
Tag Holder | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Wd. | Thick. | Material | Grommet Material | Hole Dia. | Material | Lg. | Specifications Met | Pkg. Qty. | Pkg. | |
| 5 5/8" | 3 1/8" | 0.03" | Plastic-Laminated Vinyl Plastic | Metal | 3/8" | Nylon Plastic | 7" | OSHA Compliant 29 CFR 1910.145, OSHA Compliant 29 CFR 1910.147 | 10 | 0000000 | 000000 |