We will reply to your message within an hour.
The tapered barrel on these bushings is split on both sides, allowing them to contract more tightly around the shaft than quick-disconnect and taper-lock bushings.
The screw connections on these bushings easily mate to compatible quick-disconnect sprockets and pulleys.
A mounting flange prevents movement during tightening.
Insert these bushings into the bore of your sprocket for flush or recessed mounting.
Also known as Trantorque bushings, these tighten with a twist of the collar nut—no screws needed.
Reduce the ID of sprockets, pulleys, and gears in low-torque applications.
A toothed slot lets these bushings contract for insertion into the bore of your sprocket or pulley and then expand for a snug fit.
Each hub includes a set screw (unless noted), which bites into your shaft to hold the coupling in place.
Designed to grip evenly around your shaft, these couplings provide more holding power than set screw couplings without marring the shaft.
Each hub includes a set screw, which bites into your shaft to hold the coupling in place.
Also known as Schmidt couplings, these handle higher angular misalignment than other three-piece couplings. Good for applications with varying shaft misalignment, they're commonly used with conveyor rollers and roller feeds in printing and packaging machines.
Customize the bore of these flexible couplings to align uncommon shaft sizes as well as shafts that have become undersized from wear or oversized from coatings.
Use these gear-shaped couplings for high-speed and high-torque applications.
Magnetic force transfers torque from one half of these couplings to the other; there’s no contact between the parts, so they won’t wear. Couplings compensate for angular and parallel misalignment.
Instead of replacing your shaft or keeping components, such as couplings, with various bore diameters on hand, these reducers adapt the bore of a component to a smaller size.
A bolt in each corner makes for a secure, even hold.
Use these bearings in corrosive environments and under water.
Made to withstand frequent washdowns, these bearings are permanently lubricated, which means you’ll never have to add lubricant. Use them in hard-to-reach areas in food, beverage, pharmaceutical, and chemical plants.
The lubricant in these mounted ball bearings is suitable for incidental contact with food.
Synthetic grease enables these bearings to operate in temperatures up to 400° F—nearly double the maximum temperature of standard mounted ball bearings with four-bolt flange.
The tapered rollers in these bearings support large shafts at high static loads.
With a four-bolt flange for mounting and an IP69K certification approving them for washdown environments, these mounted ball bearings are used in food, beverage, pharmaceutical, and chemical plants.
Ball bearings operate with less friction than other bearings, so they can run at higher speeds.
Designed with a thin, compact housing, these bearings are good for space-constrained applications.
A solid polymer lubricant surrounds the balls, eliminating the need for additional lubrication.
These bearings are rated IP69K as able to withstand washdown environments such as food, pharmaceutical, and chemical plants. Their fluoropolymer-coated housing is as corrosion resistant as 304 steel and safe for contact with food.
Meeting IP69K for washdown environments, these mounted ball bearings are used in food, beverage, pharmaceutical, and chemical plants.
Also known as tapped-base bearings, these ball bearings mount to surfaces from the bottom through threaded holes. Because of their narrow profile, they’re commonly used in tight-clearance spaces, including systems where multiple shafts are mounted close together.
Synthetic grease or graphite enables these bearings to operate in high temperatures.
The lubricant in these mounted ball bearings is NSF registered H1 and FDA compliant for incidental contact with food.
Roller bearings have a thinner profile and larger contact area than ball bearings, making them stronger and more space-efficient than ball bearings.
Ball bearings operate with less friction than other bearings, so you can run them at higher speeds.
An elongated mounting hole on one side of the flange lets you adjust the position of these bearings without having to remove your shaft.
Synthetic grease enables these bearings to operate in temperatures up to 400° F—nearly double the maximum temperature of standard mounted ball bearings with two-bolt flange.
Used in food, beverage, pharmaceutical, and chemical plants, these mounted ball bearings are IP69K certified for washdown environments and have a two-bolt flange for mounting.
Permanently lubricated and IP69K certified for washdown environments, these mounted ball bearings are useful for hard-to-reach areas in food, beverage, pharmaceutical, and chemical plants. Mount them using their two-bolt flange.
With all three mounting holes on one side, you can position the bearing above or below the mounting surface.
Rated IP69K for washdowns, these bearings stand up to frequent cleanings in food, beverage, pharmaceutical, and chemical plants.
Combine with threaded pipe to mount these bearings in a variety of positions without the need for a flat mounting surface.
Swap out worn inserts instead of replacing the entire mounted unit.
Slip these bearings onto a shaft and secure with the included set screws, no special tools required.
Secure these bearings in washdown areas, such as food, beverage, pharmaceutical, and chemical plants, by tightening the set screw onto a shaft—no additional collar needed.