Oil Dispensers with Flow-Adjustment Valve
Thread these dispensers directly into bearing housings, pumps, and other machinery. Flip the lever to start and stop flow; turn the dial to adjust flow. They have NPTF (Dryseal) threads, which are compatible with NPT threads.
For technical drawings and 3-D models, click on a part number.
For Max. Viscosity | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cap. | Bowl Dia. | Overall Ht. | Housing Material | Bowl Material | Pressure Regulation | ISO Grade | SAE Grade | SSU Grade | AGMA Grade | Features | Each | |
160° F Max. Temp. | ||||||||||||
1/2 NPTF Male Outlet  | ||||||||||||
| 1 gal. | 5 1/2" | 17 1/16" | Aluminum | Plastic | Vented | 320 | 90 | 1,500 | 6 | Glass Flow Sight | 0000000 | 0000000 |
| Replacement Glass Sights for 3" to 5 1/2" Bowl Dia. | 000000 | Each | 00000 |
Remote-Access Oil Dispensers with Flow-Adjustment Valve
Connect a tube fitting and tubing (not included) to the dispenser outlet to access hard-to-reach lubrication points. Flip the lever to start and stop flow; turn the dial to adjust flow. They have NPTF (Dryseal) threads, which are compatible with NPT threads.
For technical drawings and 3-D models, click on a part number.
For Max. Viscosity | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cap. | Bowl Dia. | Overall Ht. | Housing Material | Bowl Material | Pressure Regulation | Max. Temp., °F | Mounting Thread Size | ISO Grade | SAE Grade | SSU Grade | AGMA Grade | Features | Includes | Each | |
1/8 NPTF Female Outlet | |||||||||||||||
| 1 gal. | 5 1/2" | 16 5/16" | Aluminum | Plastic | Vented | 160° | 5/8"-18 | 320 | 90 | 1,500 | 6 | Glass Flow Sight | Nut, Washer | 0000000 | 0000000 |
Multiple-Outlet Oil Dispensers with Flow-Adjustment Valves
Serve multiple lubrication points from a single location. Adjust the flow to individual lubrication points by turning the dial on the corresponding valve. Change the reservoir flow by turning the dial on the bowl. Flip the lever to start and stop flow to all of the valves at once. Dispensers can be used with any oil grade. Flow rate depends on temperature.
For technical drawings and 3-D models, click on a part number.
Overall | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Cap. | Bowl Dia. | Ht. | Wd. | Housing Material | Bowl Material | Pressure Regulation | Max. Temp., °F | Mounting Thread Size | Features | Each | |
2 Outlets—For 1/4" Tube OD | |||||||||||
| 1 gal. | 5 1/2" | 19 1/16" | 4 3/8" | Aluminum | Plastic | Vented | 140° | 5/8"-18 | Glass Flow Sight | 0000000 | 0000000 |
3 Outlets—For 1/4" Tube OD | |||||||||||
| 1 gal. | 5 1/2" | 19 1/16" | 5" | Aluminum | Plastic | Vented | 140° | 5/8"-18 | Glass Flow Sight | 0000000 | 000000 |
6 Outlets—For 1/4" Tube OD | |||||||||||
| 1 gal. | 5 1/2" | 19 1/16" | 7 3/8" | Aluminum | Plastic | Vented | 140° | 5/8"-18 | Glass Flow Sight | 0000000 | 000000 |
Electrically Operated Oil Dispensers with Flow-Adjustment Valve
A solenoid automatically starts and stops flow to dispense lubricant only while equipment is running. When wired to a machine’s on/off switch, the solenoid remains closed until the machine is turned on. Turn the dial on the valve to adjust flow. Dispensers can be used with any oil grade. Flow rate depends on temperature.
For technical drawings and 3-D models, click on a part number.
Overall | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Cap. | Bowl Dia. | Ht. | Wd. | Housing Material | Bowl Material | Pressure Regulation | Max. Temp., °F | Mounting Thread Size | Each | |
120V AC 0.1A Current | ||||||||||
For 1/4" Outlet Tube OD | ||||||||||
| 1 gal. | 5 1/2" | 16 5/16" | 6 3/4" | Aluminum | Plastic | Vented | 160° | 5/8"-18 | 0000000 | 0000000 |
24V DC 0.4A Current | ||||||||||
For 1/4" Outlet Tube OD | ||||||||||
| 1 gal. | 5 1/2" | 16 5/16" | 6 3/4" | Aluminum | Plastic | Vented | 160° | 5/8"-18 | 0000000 | 000000 |
Multiple-Outlet Electrically Operated Oil Dispensers with Flow-Adjustment Valves
Serve multiple lubrication points from a single location. These dispensers have a solenoid that automatically starts and stops flow so lubrication is dispensed only while equipment is running. When wired to a machine’s on/off switch, the solenoid remains closed until the machine is turned on. To adjust the flow to individual lubrication points, turn the dial on the corresponding valve. Dispensers can be used with any oil grade. Flow rate depends on temperature.
For technical drawings and 3-D models, click on a part number.
Overall | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cap. | Bowl Dia. | Ht. | Wd. | Housing Material | Bowl Material | Pressure Regulation | Max. Temp., °F | Mounting Thread Size | Features | Electrical Connection Type | Wire Connection Type | Each | |
120V AC 0.1A Current | |||||||||||||
2 Outlets—For 1/4" Tube OD | |||||||||||||
| 1 gal. | 5 1/2" | 16 3/4" | 4 3/8" | Aluminum | Plastic | Vented | 140° | 5/8"-18 | Glass Flow Sight | Hardwire | Wire Leads | 0000000 | 0000000 |
3 Outlets—For 1/4" Tube OD | |||||||||||||
| 1 gal. | 5 1/2" | 16 3/4" | 5" | Aluminum | Plastic | Vented | 140° | 5/8"-18 | Glass Flow Sight | Hardwire | Wire Leads | 0000000 | 000000 |
4 Outlets—For 1/4" Tube OD | |||||||||||||
| 1 gal. | 5 1/2" | 16 3/4" | 5 7/8" | Aluminum | Plastic | Vented | 140° | 5/8"-18 | Glass Flow Sight | Hardwire | Wire Leads | 0000000 | 000000 |
6 Outlets—For 1/4" Tube OD | |||||||||||||
| 1 gal. | 5 1/2" | 16 3/4" | 7 3/8" | Aluminum | Plastic | Vented | 140° | 5/8"-18 | Glass Flow Sight | Hardwire | Wire Leads | 0000000 | 000000 |
24V DC 0.4A Current | |||||||||||||
2 Outlets—For 1/4" Tube OD | |||||||||||||
| 1 gal. | 5 1/2" | 16 3/4" | 4 3/8" | Aluminum | Plastic | Vented | 140° | 5/8"-18 | Glass Flow Sight | Hardwire | Wire Leads | 0000000 | 000000 |
3 Outlets—For 1/4" Tube OD | |||||||||||||
| 1 gal. | 5 1/2" | 16 3/4" | 5" | Aluminum | Plastic | Vented | 140° | 5/8"-18 | Glass Flow Sight | Hardwire | Wire Leads | 0000000 | 000000 |
4 Outlets—For 1/4" Tube OD | |||||||||||||
| 1 gal. | 5 1/2" | 16 3/4" | 5 7/8" | Aluminum | Plastic | Vented | 140° | 5/8"-18 | Glass Flow Sight | Hardwire | Wire Leads | 0000000 | 000000 |
6 Outlets—For 1/4" Tube OD | |||||||||||||
| 1 gal. | 5 1/2" | 16 3/4" | 7 3/8" | Aluminum | Plastic | Vented | 140° | 5/8"-18 | Glass Flow Sight | Hardwire | Wire Leads | 0000000 | 000000 |
Oil Reservoirs
Mount these reservoirs directly to your machine, or use them with a flow-adjustment valve and brush (each sold separately) to create a dispenser.
Reservoirs with 140° F max. temp. have NPTF (Dryseal) threads, which are compatible with NPT threads. Flow rate depends on temperature.
For technical drawings and 3-D models, click on a part number.
For Max. Viscosity | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Cap. | Bowl Dia. | Overall Ht. | Housing Material | Bowl Material | Pressure Regulation | ISO Grade | SAE Grade | SSU Grade | AGMA Grade | Each | |
3/8 NPTF Male Outlet | |||||||||||
| 1 gal. | 5 1/2" | 14 15/16" | Aluminum | Plastic | Vented | Not Rated | Not Rated | Not Rated | Not Rated | 0000000 | 0000000 |
1/2 NPTF Male Outlet | |||||||||||
| 1 gal. | 5 1/2" | 15 1/4" | Aluminum | Plastic | Vented | Not Rated | Not Rated | Not Rated | Not Rated | 0000000 | 000000 |
Air-Powered Oil Dispensers
Connect these dispensers to your air system to pressurize the oil in the reservoir and atomize the spray. Dual regulators allow you to adjust the pressure of the oil and the atomized spray. Add a spray valve (sold separately) to direct the flow of oil. A removable filter prevents valve blockage. They have NPTF (Dryseal) threads, which are compatible with NPT threads.
Overall | Air Inlet | Air Outlet | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cap. | Max. Oil Outlet Pressure, psi | Ht. | Wd. | Dp. | Max. Air Inlet Pressure, psi | Thread Type | Pipe Size | Gender | Thread Type | Pipe Size | Gender | Temp. Range, °F | Mounting Hole Thread Size | For Max. ISO Viscosity Grade | Each | |
1/8 NPTF Female Outlet | ||||||||||||||||
| 1 gal. | 30 | 19 1/4" | 5 13/16" | 5 13/16" | 125 | NPTF | 1/4 | Female | NPTF | 1/8 | Female | -30° to 140° | 5/16"-24 | 150 | 00000000 | 0000000 |
| Material | Ht. | OD | ID | Max. Temp., ° F | Each | |
| Rayon | 1 3/8" | 3/4" | 5/8" | 360° | 00000000 | 000000 |
Hydraulic Tanks
Store fluids for a hydraulic power unit or circulating-oil system. Choose a tank capacity about three times greater than your requirement to allow for heat dissipation. Tanks with only a drain connection require you to drill your own inlet/outlet connection and add pipe suction flanges (sold separately). Flanges seal pipes that pass through the top plate of your tank.
Breather vents prevent excess pressure in tanks and allow a free flow of air.
For technical drawings and 3-D models, click on a part number.
O'all | Drain Connection— NPT | Mounting | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Cap., gal. | Lg. | Wd. | Ht. | Pipe Size | Dash Size | No. of Ports | Fasteners Included | No. of Holes | Hole Dia. | Max. Temp., °F | Each | |
Steel Tanks | |||||||||||||
Single Chamber | |||||||||||||
| A | 1 | 6" | 7 1/2" | 12 1/4" | 1/2 | 08 | 1 | No | 4 | 11/32" | 250° | 0000000 | 0000000 |
Mounting Hole | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| For Pipe Size | For Cutout Dia. | Material | Mounting Fasteners Included | Ctr.-to-Ctr. | Lg. | Wd. | Includes | Each | |
| 1/2 | 4 5/16" | Steel | Yes | 4 1/4" | 7/8" | 7/16" | Top Plate, Bottom Plate, Gasket, Washer | 00000000 | 000000 |
| 3/4 | 4 5/16" | Steel | Yes | 4 1/4" | 7/8" | 7/16" | Top Plate, Bottom Plate, Gasket, Washer | 00000000 | 00000 |
| 1 1/4 | 4 5/16" | Steel | Yes | 4 1/4" | 7/8" | 7/16" | Top Plate, Bottom Plate, Gasket, Washer | 00000000 | 00000 |
| 1 1/2 | 4 5/16" | Steel | Yes | 4 1/4" | 7/8" | 7/16" | Top Plate, Bottom Plate, Gasket, Washer | 00000000 | 00000 |
| 2 | 4 5/16" | Steel | Yes | 4 1/4" | 7/8" | 7/16" | Top Plate, Bottom Plate, Gasket, Washer | 00000000 | 00000 |
Material | Strainer | Mounting Hole | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Cutout Dia. | Cap | Strainer | Gasket | Removes Particle Size Down To, microns | Cap Dia. | Flange Dia. | Dia. | Ht. | Mounting Fasteners Included | Lg. | Wd. | Bolt Circle Dia. | Each | |
| 2 1/8" | Zinc-Plated Steel | Plastic | Rubber | 40 | 3" | 3 1/4" | 1 7/8" | 3 13/16" | Yes | 1/4" | 3/16" | 2 7/8" | 00000000 | 000000 |
Thread | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Type | Gender | Connection Ctr.-to-Ctr. | Overall Ht. | Window Ht. | Body Wd. | For Max. Tank Wall Thick. | Max. Pressure | Temperature Range | Material | Fitting Material | Window Material | Includes | Each | |
| 1/2"-20 | UNF | Male | 5" | 6 5/8" | 3 1/2" | 7/8" | 3/4" | 290 psi @ 70° F | -40° F to 250° F | Aluminum | Aluminum | Glass | Mounting Nuts | 0000000 | 000000 |
Bladder-Style Hydraulic Accumulators
Charge these accumulators to the pressure you need, and they will help a system maintain a constant pressure during pump failure. Mount accumulators within 25° of vertical. UN/UNF (SAE Straight) thread connections have straight threads and are also known as O-ring Boss fittings.
Note: For safety, do not disassemble accumulators while they're under pressure.
Use a charging and gauging kit to increase or decrease an accumulator's charge.
For technical drawings and 3-D models, click on a part number.
Accumulators | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inlet/Outlet Connection for Hydraulic Fluid—UN/UNF (SAE Straight) | Inlet/Outlet Connection for Nitrogen | Body | Repl. Bladder Bags | ||||||||||||
| Cap. | Max. Flow Rate, gpm | Max. Pressure, psi | Thread Size | Gender | Dash Size | Valve Type | Gender | O'all Ht. | Ht. | Dia. | Mounting Orientation | Each | Each | ||
Steel Body with Buna-N Rubber Bag and Seal | |||||||||||||||
| 1 gal. | 150 | 3,000 | 1 5/8"-12 | Female | 20 | Schrader | Male | 17" | 11 3/8" | 6 3/4" | Vertical | 00000000 | 000000000 | 00000000 | 0000000 |
| Charging and Gauging Kits | 00000000 | Each | 0000000 |
Charged Bladder-Style Hydraulic Accumulators
These accumulators come with a charge of nitrogen and are ready to use. They help a system maintain a constant pressure during pump failure. Mount accumulators within 25° of vertical. UN/UNF (SAE Straight) thread connections have straight threads and are also known as O-ring Boss fittings.
Note: For safety, do not disassemble accumulators while they're under pressure.
Use a charging and gauging kit to increase or decrease an accumulator's charge.
For technical drawings and 3-D models, click on a part number.
Accumulators | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inlet/Outlet Connection for Hydraulic Fluid—UN/UNF (SAE Straight) | Inlet/Outlet Connection for Nitrogen | Body | Repl. Bladder Bags | |||||||||||||
| Cap. | Max. Flow Rate, gpm | Max. Pressure, psi | Nitrogen Charge, psi | Thread Size | Gender | Dash Size | Valve Type | Gender | O'all Ht. | Ht. | Dia. | Mounting Orientation | Each | Each | ||
Steel Body with Buna-N Rubber Bag and Seal | ||||||||||||||||
| 1 gal. | 150 | 3,000 | 2,100 | 1 5/8"-12 | Female | 20 | Schrader | Male | 17" | 11 3/8" | 6 3/4" | Vertical | 00000000 | 000000000 | 00000000 | 0000000 |
| Charging and Gauging Kits | 00000000 | Each | 0000000 |