Thread these dispensers directly into bearing housings, pumps, and other machinery. Flip the lever to start and stop flow; turn the dial to adjust flow. They have NPTF (Dryseal) threads, which are compatible with NPT threads.

Connect these dispensers to your air system to pressurize the oil in the reservoir and atomize the spray. Dual regulators allow you to adjust the pressure of the oil and the atomized spray. Add a spray valve (sold separately) to direct the flow of oil. A removable filter prevents valve blockage. They have NPTF (Dryseal) threads, which are compatible with NPT threads.

A solenoid automatically starts and stops flow to dispense lubricant only while equipment is running. When wired to a machine’s on/off switch, the solenoid remains closed until the machine is turned on. Turn the dial on the valve to adjust flow. Dispensers can be used with any oil grade. Flow rate depends on temperature.

Customize these dispensers to serve up to 24 lubrication points from a single location. Dispensers come with two flow-adjustment valves and can accommodate up to 24 valves total. Additional valves are sold separately. Valves thread together to make a sealed connection. Adjust the flow to individual lubrication points by turning the dial on the corresponding valve. Flip the lever to start and stop flow to all of the valves at once.

Connect a tube fitting and tubing (not included) to the dispenser outlet to access hard-to-reach lubrication points. Flip the lever to start and stop flow; turn the dial to adjust flow. They have NPTF (Dryseal) threads, which are compatible with NPT threads.

Serve multiple lubrication points from a single location. Adjust the flow to individual lubrication points by turning the dial on the corresponding valve. Change the reservoir flow by turning the dial on the bowl. Flip the lever to start and stop flow to all of the valves at once. Dispensers can be used with any oil grade. Flow rate depends on temperature.

Serve multiple lubrication points from a single location. These dispensers have a solenoid that automatically starts and stops flow so lubrication is dispensed only while equipment is running. When wired to a machine’s on/off switch, the solenoid remains closed until the machine is turned on. To adjust the flow to individual lubrication points, turn the dial on the corresponding valve. Dispensers can be used with any oil grade. Flow rate depends on temperature.