Capacity Capacity |
|---|
For Use With For Use With | Show |
|---|
|
For Use With For Use With | Hide |
|---|
|
Hydraulic Tank Type Hydraulic Tank Type |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Thread Type Thread Type |
|---|
|
Connection Connection |
|---|
|
Overall Height Overall Height |
|---|
|
|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
Cover Style Cover Style |
|---|
|
Number of Mounting Holes Number of Mounting Holes |
|---|
|
Thread Size Thread Size |
|---|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
Hydraulic Tanks
Store fluids for a hydraulic power unit or circulating-oil system. Choose a tank capacity about three times greater than your requirement to allow for heat dissipation. Tanks with only a drain connection require you to drill your own inlet/outlet connection and add pipe suction flanges (sold separately). Flanges seal pipes that pass through the top plate of your tank.
Dual chamber tanks have a divider that allows particles to settle on one side before fluid is returned to your line.
Breather vents prevent excess pressure in tanks and allow a free flow of air. To install the breather vent to Style C tanks, drill a hole in the tank.
For technical drawings and 3-D models, click on a part number.
O'all | Drain Connection— NPT | Inlet/Outlet Connection— NPT | Mounting | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Style | Cap., gal. | Lg. | Wd. | Ht. | Pipe Size | Dash Size | No. of Ports | Pipe Size | Dash Size | No. of Ports | Fasteners Included | No. of Holes | Hole Dia. | Max. Temp., °F | Each | |
Steel Tanks | ||||||||||||||||
Single Chamber | ||||||||||||||||
| A | 1 | 6" | 7 1/2" | 12 1/4" | 1/2 | 08 | 1 | __ | __ | __ | No | 4 | 11/32" | 250° | 0000000 | 0000000 |
| A | 2 | 10" | 7 1/2" | 12 1/4" | 1/2 | 08 | 1 | 1/2 | 08 | 1 | No | 4 | 11/32" | 250° | 0000000 | 000000 |
| B | 2 | 10 1/8" | 10 1/8" | 9 1/8" | 1/2 | 08 | 1 | __ | __ | __ | No | 4 | 7/16" | 212° | 00000000 | 000000 |
| B | 3 | 10 1/8" | 10 1/8" | 13 1/8" | 1/2 | 08 | 1 | __ | __ | __ | No | 4 | 7/16" | 212° | 00000000 | 000000 |
| B | 5 | 10 1/8" | 10 1/8" | 17 1/8" | 1/2 | 08 | 1 | __ | __ | __ | No | 4 | 7/16" | 212° | 00000000 | 000000 |
| B | 8 | 14 1/4" | 12" | 19 1/4" | 3/4 | 12 | 1 | __ | __ | __ | No | 4 | 7/16" | 212° | 00000000 | 000000 |
| B | 10 | 19" | 14 7/8" | 15 1/4" | 3/4 | 12 | 1 | __ | __ | __ | No | 4 | 7/16" | 212° | 00000000 | 000000 |
Dual Chamber | ||||||||||||||||
| A | 5 | 16" | 10" | 14" | 1/2 | 08 | 2 | 1 | 16 | 2 | No | 4 | 17/32" | 250° | 0000000 | 000000 |
| A | 10 | 20" | 12" | 17 1/2" | 1/2 | 08 | 2 | 1 | 16 | 2 | No | 4 | 17/32" | 250° | 0000000 | 000000 |
| C | 20 | 26" | 16" | 15 3/4" | 3/4 | 12 | 1 | __ | __ | __ | No | 4 | 1/2" | 212° | 00000000 | 000000 |
| C | 30 | 26" | 16" | 21 3/4" | 3/4 | 12 | 1 | __ | __ | __ | No | 4 | 1/2" | 212° | 00000000 | 000000 |
| C | 40 | 38 1/4" | 24" | 14" | 3/4 | 12 | 1 | __ | __ | __ | No | 4 | 7/16" | 212° | 00000000 | 000000 |
| C | 60 | 42 3/8" | 30" | 16 5/8" | 3/4 | 12 | 1 | __ | __ | __ | No | 4 | 7/16" | 212° | 00000000 | 000000 |
| C | 100 | 50 3/8" | 30" | 19" | 3/4 | 12 | 1 | __ | __ | __ | No | 4 | 7/16" | 212° | 00000000 | 00000000 |
| Replacement Neoprene Rubber Gasket for 62945K42 and 62945K43 | 00000000 | Each | 00000 |
| Replacement Buna-N Rubber Gasket for 62945K35 and 62945K37 | 00000000 | Each | 00000 |
| Replacement Steel Cover for 62945K35 and 62945K37 | 00000000 | Each | 00000 |
| Replacement Buna-N Rubber Gasket for 62945K14, 62945K15, and 62945K34 | 00000000 | Each | 0000 |
| Replacement Steel Cover for 62945K14, 62945K15, and 62945K34 | 00000000 | Each | 00000 |
| Replacement Neoprene Rubber Gasket for 62945K14 and 62945K15 | 00000000 | Each | 00000 |
| Replacement Buna-N Rubber Gasket for 62945K11, 62945K12, and 62945K13 | 00000000 | Each | 00000 |
Mounting Hole | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| For Pipe Size | For Cutout Dia. | Material | Mounting Fasteners Included | Ctr.-to-Ctr. | Lg. | Wd. | Includes | Each | |
| 1/2 | 4 5/16" | Steel | Yes | 4 1/4" | 7/8" | 7/16" | Top Plate, Bottom Plate, Gasket, Washer | 00000000 | 000000 |
| 3/4 | 4 5/16" | Steel | Yes | 4 1/4" | 7/8" | 7/16" | Top Plate, Bottom Plate, Gasket, Washer | 00000000 | 00000 |
| 1 1/4 | 4 5/16" | Steel | Yes | 4 1/4" | 7/8" | 7/16" | Top Plate, Bottom Plate, Gasket, Washer | 00000000 | 00000 |
| 1 1/2 | 4 5/16" | Steel | Yes | 4 1/4" | 7/8" | 7/16" | Top Plate, Bottom Plate, Gasket, Washer | 00000000 | 00000 |
| 2 | 4 5/16" | Steel | Yes | 4 1/4" | 7/8" | 7/16" | Top Plate, Bottom Plate, Gasket, Washer | 00000000 | 00000 |
Material | Strainer | Mounting Hole | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Cutout Dia. | Cap | Strainer | Gasket | Removes Particle Size Down To, microns | Cap Dia. | Flange Dia. | Dia. | Ht. | Mounting Fasteners Included | Lg. | Wd. | Bolt Circle Dia. | Each | |
| 2 1/8" | Zinc-Plated Steel | Plastic | Rubber | 40 | 3" | 3 1/4" | 1 7/8" | 3 13/16" | Yes | 1/4" | 3/16" | 2 7/8" | 00000000 | 000000 |
Thread | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Size | Type | Gender | Connection Ctr.-to-Ctr. | Overall Ht. | Window Ht. | Body Wd. | For Max. Tank Wall Thick. | Max. Pressure | Temperature Range | Material | Fitting Material | Window Material | Includes | Each | |
| 1/2"-20 | UNF | Male | 5" | 6 5/8" | 3 1/2" | 7/8" | 3/4" | 290 psi @ 70° F | -40° F to 250° F | Aluminum | Aluminum | Glass | Mounting Nuts | 0000000 | 000000 |
| 1/2"-20 | UNF | Male | 6" | 7 5/8" | 4 1/2" | 7/8" | 3/4" | 290 psi @ 70° F | -40° F to 250° F | Aluminum | Aluminum | Glass | Mounting Nuts | 0000000 | 00000 |
| 1/2"-20 | UNF | Male | 9" | 10 5/8" | 7 1/2" | 7/8" | 3/4" | 290 psi @ 70° F | -40° F to 250° F | Aluminum | Aluminum | Glass | Mounting Nuts | 0000000 | 00000 |
For Hole | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | No. of | Connection Ctr.-to-Ctr. | Overall Ht. | Window Ht. | Body Wd. | For Max. Tank Wall Thick. | Max. Pressure | Temp. Range | Thermometer Temp. Range | Material | Guard Material | Window Material | Each | |
| 1/2" | 2 | 5" | 6 3/8" | 3 7/8" | 13/16" | 1/2" | 50 psi @ 70° F | -40° F to 210° F | 0° F to 220° F | Nylon Plastic | Steel | Nylon Plastic | 0000000 | 000000 |
Sealed Hydraulic Accumulators
Charge these accumulators to the pressure you need, and they will help a system maintain a constant pressure during pump failure. Mount them in any orientation. UN/UNF (SAE) thread connections have straight threads and are also known as O-ring Boss fittings.
Note: For safety, do not disassemble accumulators while they're under pressure.
Diaphragm accumulators have bags that can't be replaced.
Use a charging and gauging kit to increase or decrease an accumulator’s charge.
For technical drawings and 3-D models, click on a part number.
Inlet/Outlet Connection for Hydraulic Fluid— UN/UNF (SAE) | Inlet/Outlet Connection for Nitrogren | Body | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cap., oz. | Max. Flow Rate, gpm | Max. Pressure, psi | Thread Size | Gender | Dash Size | Valve Type | Gender | O'all Ht. | Ht. | Dia. | Mounting Orientation | Each | |
Steel Body with Buna-N Rubber Diaphragm | |||||||||||||
| 16 1/2 | 25 | 3,000 | 3/4"-16 | Female | 08 | Schrader | Male | 6 7/8" | 4 3/8" | 4 1/8" | Any Position | 0000000 | 0000000 |
| 33 1/2 | 25 | 3,000 | 3/4"-16 | Female | 08 | Schrader | Male | 7 7/8" | 5 3/8" | 5 3/8" | Any Position | 0000000 | 000000 |
| 66 1/2 | 40 | 3,000 | 1 1/16"-12 | Female | 12 | Schrader | Male | 9 1/4" | 6 13/16" | 6 5/8" | Any Position | 0000000 | 000000 |
| Charging and Gauging Kits | 00000000 | Each | 0000000 |
Inlet/Outlet Connection for Hydraulic Fluid— UN/UNF (SAE) | Inlet/Outlet Connection for Nitrogren | Body | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cap., oz. | Max. Flow Rate, gpm | Max. Pressure, psi | Thread Size | Gender | Dash Size | Valve Type | Gender | O'all Ht. | Ht. | Dia. | Bore Dia. | Mounting Orientation | Each | |
Steel Body with Buna-N Rubber Seal | ||||||||||||||
| 16 | 100 | 4,000 | 3/4"-16 | Female | 08 | Schrader | Male | 13 3/8" | 12 7/16" | 2 3/8" | 2" | Any Position | 0000000 | 0000000 |
| 32 | 100 | 4,000 | 3/4"-16 | Female | 08 | Schrader | Male | 21 7/8" | 20 15/16" | 2 3/8" | 2" | Any Position | 0000000 | 000000 |
| Charging and Gauging Kits | 00000000 | Each | 0000000 |
Charged Sealed Hydraulic Accumulators
These accumulators come with a charge of nitrogen and are ready to use. They help a system maintain a constant pressure during pump failure. Mount these accumulators in any orientation. UN/UNF (SAE) thread connections have straight threads and are also known as O-ring Boss fittings.
Note: For safety, do not disassemble accumulators while they're under pressure.
Diaphragm accumulators have bags that can't be replaced.
Use a charging and gauging kit to increase or decrease an accumulator’s charge.
For technical drawings and 3-D models, click on a part number.
Inlet/Outlet Connection for Hydraulic Fluid— UN/UNF (SAE) | Inlet/Outlet Connection for Nitrogen | Body | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cap., oz. | Max. Flow Rate, gpm | Max. Pressure, psi | Nitrogen Charge, psi | Thread Size | Gender | Dash Size | Valve Type | Gender | O'all Ht. | Ht. | Dia. | Mounting Orientation | Each | |
Steel Body with Buna-N Rubber Diaphragm | ||||||||||||||
| 16 1/2 | 25 | 3,000 | 1,000 | 3/4"-16 | Female | 08 | Schrader | Male | 6 7/8" | 4 3/8" | 4 1/8" | Any Position | 0000000 | 0000000 |
| 33 1/2 | 25 | 3,000 | 1,000 | 3/4"-16 | Female | 08 | Schrader | Male | 7 7/8" | 5 3/8" | 5 3/8" | Any Position | 0000000 | 000000 |
| 66 1/2 | 40 | 3,000 | 1,000 | 1 1/16"-12 | Female | 12 | Schrader | Male | 9 1/4" | 6 13/16" | 6 5/8" | Any Position | 0000000 | 000000 |
| Charging and Gauging Kits | 00000000 | Each | 0000000 |
Inlet/Outlet Connection for Hydraulic Fluid— UN/UNF (SAE) | Inlet/Outlet Connection for Nitrogen | Body | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Cap., oz. | Max. Flow Rate, gpm | Max. Pressure, psi | Nitrogen Charge, psi | Thread Size | Gender | Dash Size | Valve Type | Gender | O'all Ht. | Ht. | Dia. | Bore Dia. | Mounting Orientation | Each | |
Steel Body with Buna-N Rubber Seal | |||||||||||||||
| 16 | 100 | 4,000 | 1,000 | 3/4"-16 | Female | 08 | Schrader | Male | 13 3/8" | 12 7/16" | 2 3/8" | 2" | Any Position | 0000000 | 0000000 |
| 32 | 100 | 4,000 | 1,000 | 3/4"-16 | Female | 08 | Schrader | Male | 21 7/8" | 20 15/16" | 2 3/8" | 2" | Any Position | 0000000 | 000000 |
| Charging and Gauging Kits | 00000000 | Each | 0000000 |
Bladder-Style Hydraulic Accumulators
Charge these accumulators to the pressure you need, and they will help a system maintain a constant pressure during pump failure. Mount accumulators within 25° of vertical. UN/UNF (SAE) thread connections have straight threads and are also known as O-ring Boss fittings.
Note: For safety, do not disassemble accumulators while they're under pressure.
Use a charging and gauging kit to increase or decrease an accumulator's charge.
For technical drawings and 3-D models, click on a part number.
Accumulators | |||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inlet/Outlet Connection for Hydraulic Fluid— UN/UNF (SAE) | Inlet/Outlet Connection for Nitrogen | Body | Repl. Bladder Bags | ||||||||||||
| Cap. | Max. Flow Rate, gpm | Max. Pressure, psi | Thread Size | Gender | Dash Size | Valve Type | Gender | O'all Ht. | Ht. | Dia. | Mounting Orientation | Each | Each | ||
Steel Body with Buna-N Rubber Bag and Seal | |||||||||||||||
| 16 oz. | 40 | 3,000 | 1 1/16"-12 | Female | 12 | Schrader | Male | 10 3/4" | 6 7/8" | 3 3/8" | Vertical | 00000000 | 0000000 | 00000000 | 0000000 |
| 32 oz. | 40 | 3,000 | 1 5/16"-12 | Female | 16 | Schrader | Male | 11 1/8" | 7 5/8" | 4 1/2" | Vertical | 00000000 | 000000 | 00000000 | 000000 |
| 1 gal. | 150 | 3,000 | 1 5/8"-12 | Female | 20 | Schrader | Male | 17" | 11 3/8" | 6 3/4" | Vertical | 00000000 | 00000000 | 00000000 | 000000 |
| 2 1/2 gal. | 220 | 3,000 | 1 7/8"-12 | Female | 24 | Schrader | Male | 21 3/8" | 15 1/2" | 9" | Vertical | 00000000 | 00000000 | 00000000 | 000000 |
| 5 gal. | 220 | 3,000 | 1 7/8"-12 | Female | 24 | Schrader | Male | 33 3/8" | 27 1/2" | 9" | Vertical | 00000000 | 00000000 | 00000000 | 000000 |
| Charging and Gauging Kits | 00000000 | Each | 0000000 |
Charged Bladder-Style Hydraulic Accumulators
These accumulators come with a charge of nitrogen and are ready to use. They help a system maintain a constant pressure during pump failure. Mount accumulators within 25° of vertical. UN/UNF (SAE) thread connections have straight threads and are also known as O-ring Boss fittings.
Note: For safety, do not disassemble accumulators while they're under pressure.
Use a charging and gauging kit to increase or decrease an accumulator's charge.
For technical drawings and 3-D models, click on a part number.
Accumulators | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Inlet/Outlet Connection for Hydraulic Fluid— UN/UNF (SAE) | Inlet/Outlet Connection for Nitrogen | Body | Repl. Bladder Bags | |||||||||||||
| Cap. | Max. Flow Rate, gpm | Max. Pressure, psi | Nitrogen Charge, psi | Thread Size | Gender | Dash Size | Valve Type | Gender | O'all Ht. | Ht. | Dia. | Mounting Orientation | Each | Each | ||
Steel Body with Buna-N Rubber Bag and Seal | ||||||||||||||||
| 16 oz. | 40 | 3,000 | 1,000 | 1 1/16"-12 | Female | 12 | Schrader | Male | 10 3/4" | 6 7/8" | 3 3/8" | Vertical | 00000000 | 0000000 | 00000000 | 0000000 |
| 32 oz. | 40 | 3,000 | 1,000 | 1 5/16"-12 | Female | 16 | Schrader | Male | 11 1/8" | 7 5/8" | 4 1/2" | Vertical | 00000000 | 00000000 | 00000000 | 000000 |
| 1 gal. | 150 | 3,000 | 2,100 | 1 5/8"-12 | Female | 20 | Schrader | Male | 17" | 11 3/8" | 6 3/4" | Vertical | 00000000 | 00000000 | 00000000 | 000000 |
| 2 1/2 gal. | 220 | 3,000 | 2,100 | 1 7/8"-12 | Female | 24 | Schrader | Male | 21 3/8" | 15 1/2" | 9" | Vertical | 00000000 | 00000000 | 00000000 | 000000 |
| 5 gal. | 220 | 3,000 | 2,100 | 1 7/8"-12 | Female | 24 | Schrader | Male | 33 3/8" | 27 1/2" | 9" | Vertical | 00000000 | 00000000 | 00000000 | 000000 |
| Charging and Gauging Kits | 00000000 | Each | 0000000 |