System of Measurement System of Measurement |
|---|
|
Shape Shape |
|---|
 | I Beam |
Material Material | Show |
|---|
|
Material Material | Hide |
|---|
|
Certificate Certificate |
|---|
 | |
Heat Treatable Heat Treatable |
|---|
|
Yield Strength Yield Strength |
|---|
|
Specifications Met Specifications Met |
|---|
Hardness Rating Hardness Rating |
|---|
|
Outside Corner Shape Outside Corner Shape |
|---|
|
Fabrication Fabrication |
|---|
|
Heat Treatment Heat Treatment |
|---|
|
Minimum Temperature Minimum Temperature |
|---|
|
Maximum Temperature Maximum Temperature |
|---|
|
Elongation Elongation |
|---|
|
Hardness Hardness |
|---|
|
Inside Corner Shape Inside Corner Shape |
|---|
|
Track Capacity Track Capacity |
|---|
|
Component Component |
|---|
|
About Stainless Steel
More
Multipurpose 304 Stainless Steel
From cookware to chemical-processing equipment, 304 stainless steel is a good all-around choice for a wide range of applications. It maintains its corrosion resistance in temperatures up to 1500° F.
Bars with sheared edges are also known as Gauer bar and are sheared from plate.
I-beams are lighter weight than H-bars, but they're not as strong. Use them when weight is a concern.
For technical drawings and 3-D models, click on a part number.
Certificates with a traceable lot number are available for these products. Download certificates from ACTIVITY after your order ships.
- Yield Strength: 35,000 psi
- Hardness: Rockwell B80 (Medium)
- Heat Treatment: Annealed (Softened)
- Heat Treatable: No
- Specifications Met: ASTM A240
Outside | Corner Shape | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Ht. | Ht. Tolerance | Wd. | Wd. Tolerance | Inside Wd. | Fabrication | Edge Fabrication | Outside | Inside | Straightness Tolerance | 3 ft. Lg. | 6 ft. Lg. | |
0.26" Wall Thick. | ||||||||||||
| 3" | -1/8" to 1/8" | 2.33" | -0.188" to 1/4" | 1.81" | Hot Rolled | Sheared | Round | Round | 0.0625" per 6 ft. | 0000000 | ||
0.293" Wall Thick. | ||||||||||||
| 4" | -1/8" to 1/8" | 2.663" | -0.188" to 1/4" | 2.08" | Hot Rolled | Sheared | Round | Round | 0.0625" per 6 ft. | 0000000 | ||
0.326" Wall Thick. | ||||||||||||
| 5" | -1/8" to 1/8" | 3.004" | -0.188" to 1/4" | 2.35" | Hot Rolled, Welded | Sheared | Round | Round | 0.0625" per 6 ft. | 0000000 | ||
0.359" Wall Thick. | ||||||||||||
| 6" | -1/8" to 1/8" | 3.332" | -0.188" to 1/4" | 2.61" | Hot Rolled | Sheared | Round | Round | 0.0625" per 6 ft. | 0000000 | ||
Corrosion-Resistant I-Beam Roller Track for Doors and Curtains
Built to withstand corrosive marine environments, track is anodized aluminum and hangers are 316 stainless steel. Combine track and hangers to create a system for hanging doors and curtains. Some components that fit together are rated for different capacities; the capacity of your system is determined by the component with the lowest capacity.
Track mounts using bolts (sold separately). Nine bolts are required for every 3 ft. of track.Clevis-pin hanger has three clevis pins to hold doors and curtains up to 1/2" thick. Hanger can be used individually as well as in pairs.
Mounting-loop hanger has a loop with a 1/4" dia. opening to attach doors and curtains with carabiners, S-hooks, and shackles (not included). Hanger can be used individually as well as in pairs.
End stops prevent hangers from rolling off the track.
For technical drawings and 3-D models, click on a part number.
| Material | Each | |
For 550-lb. Track Capacity | ||
|---|---|---|
| 300 Series Stainless Steel | 0000000 | 000000 |
| For Max. Door Thick. | Wd. | Ht. | Material | Each | |
For 550-lb. Track Capacity | |||||
|---|---|---|---|---|---|
| 1/2" | 3/4" | 15/16" | 316 Stainless Steel | 0000000 | 0000000 |
| Wd. | Ht. | Loop Opening | Material | Each | |
For 1,400-lb. Track Capacity | |||||
|---|---|---|---|---|---|
| 1 1/4" | 1 1/4" | 1/4" | 316 Stainless Steel | 0000000 | 0000000 |
| Material | Each | |
For 1,400-lb. Track Capacity | ||
|---|---|---|
| 300 Series Stainless Steel | 0000000 | 000000 |