McMaster-Carr logo
    Forward
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Print
    How can we improve?
    Comments
    E-mail address (if you would like a response)
    57 Products

    Hoist Trolleys

    Transport hook-mount hoists along a beam.
    Warning: Never use to lift people or items over people.
    Mounting Eye Trolleys
    Image of ProductInUse. Front orientation. Contains Annotated. Trolleys. Hoist Trolleys, Style C.

    Style C

    Style C—Style C are rated for metric tons.
    Screw Adjustment—Trolleys with screw adjustment can be adjusted to fit your beam more quickly than trolleys that use spacing washers.
    Anti-Drop Plates—Anti-drop plates prevent trolleys from falling off the beam if the wheels become derailed.
    For
    Beam
    Style
    Wt. Cap.
    Shape
    Wd.
    Min.
    Ht.
    Clearance
    Min. Curve
    Radius
    Wheel
    Material
    Eye
    Dia.
    Adjustment
    Mechanism
    Features
    Each
    Steel
    C1/2 ton/1,100 lb.Flat, Taper2" to 8 5/8"2 3/4"3"35"Steel1"ScrewAnti-Drop Plates9482T840000000
    C1 ton/2,200 lb.Flat, Taper2" to 8 5/8"2 3/4"3 1/4"35"Steel1 1/8"ScrewAnti-Drop Plates9482T85000000
    C2 ton/4,400 lb.Flat, Taper2 1/2" to 8 5/8"3 3/4"3 7/8"45"Steel1 1/2"ScrewAnti-Drop Plates9482T86000000
    C3 ton/6,600 lb.Flat, Taper3" to 8 5/8"5 1/8"4 1/2"55"Steel2"ScrewAnti-Drop Plates9482T87000000
    C5 ton/11,000 lb.Flat, Taper3 1/2" to 8 5/8"5 5/8"5 1/4"70"Steel2 1/4"ScrewAnti-Drop Plates9482T88000000
     

    Beam Clamps for Pipe, Tube, and Conduit

    Image of ProductInUse. Front orientation. Beam Clamps. Beam Clamps for Pipe, Tube, and Conduit, For Perpendicular Mounting.
    Image of ProductInUse. Front orientation. Beam Clamps. Beam Clamps for Pipe, Tube, and Conduit, For Parallel Mounting.

    For Perpendicular Mounting

    For Parallel Mounting

    Secure lines of pipe, tubing, and conduit to the flange of a beam.
    Galvanized Iron—Galvanized iron clamps have good corrosion resistance.
    316 Stainless Steel—316 stainless steel clamps have excellent corrosion resistance and chemical resistance.
    For OD
    For
    Beam Thk.
    For
    Perpendicular Mounting
    For Parallel
    Mounting
    For Beam
    Shape
    Inch
    Metric,
    mm
    For Pipe
    Size
    Min.
    Max.
    Wt. Cap.,
    lb.
    Mount
    Type
    Throat
    Dp.
    Fastener Strength
    Grade/Class
    Each
    Each
    Bottom and Top Beam Mount
     
    Galvanized Iron
    Flat, Taper5/8"163/8
    		1/8"3/4"Not RatedClamp On7/16"—29585T81000000———0
    Flat, Taper7/8"221/2
    		1/8"3/4"Not RatedClamp On7/16"—29585T82000008868T61000000
    Flat, Taper1"253/4
    		1/8"3/4"Not RatedClamp On7/16"—29585T83000008868T6200000
    Flat, Taper1 5/16"331
    		1/8"3/4"Not RatedClamp On7/16"—29585T84000008868T6300000
    Flat, Taper1 5/8"411 1/4
    		1/8"3/4"Not RatedClamp On7/16"—29585T85000008868T6400000
    Flat, Taper1 7/8"481 1/2
    		1/8"3/4"Not RatedClamp On7/16"—29585T86000008868T6500000
    Flat, Taper2 3/8"602
    		1/8"3/4"Not RatedClamp On7/16"—29585T87000008868T6600000
     
    316 Stainless Steel
    Flat, Taper13/16"211/2
    		1/8"3/4"150Clamp On1/2"ASTM Grade B8M
    		29585T100000———0
    Flat, Taper1"253/4
    		1/8"3/4"150Clamp On1/2"ASTM Grade B8M
    		29585T200000———0
    Flat, Taper1 5/16"331
    		1/8"3/4"200Clamp On1/2"ASTM Grade B8M
    		29585T300000———0
    Flat, Taper1 5/8"411 1/4
    		1/8"3/4"225Clamp On1/2"ASTM Grade B8M
    		29585T400000———0
    Flat, Taper1 7/8"481 1/2
    		1/8"3/4"250Clamp On1/2"ASTM Grade B8M
    		29585T500000———0
    Flat, Taper2 3/8"602
    		1/8"3/4"500Clamp On1/2"ASTM Grade B8M
    		29585T600000———0
    Flat, Taper2 7/8"732 1/2
    		1/8"3/4"500Clamp On1/2"ASTM Grade B8M
    		29585T700000———0
    Flat, Taper3 1/2"893
    		1/8"3/4"500Clamp On1/2"ASTM Grade B8M
    		29585T800000———0
    Flat, Taper4"1023 1/2
    		1/8"3/4"600Clamp On1/2"ASTM Grade B8M
    		29585T900000———0
    Flat, Taper4 1/2"1144
    		1/8"3/4"700Clamp On1/2"ASTM Grade B8M
    		29585T1100000———0
     

    Beam Clamps for Threaded Rods

    Image of ProductInUse. Front orientation. Beam Clamps. Beam Clamps for Threaded Rods, Style E.

    Style E

    Attach these clamps to the flange of a beam, then hang threaded rods from the threaded hole.
    Zinc-Plated Iron—Zinc-plated iron clamps have mild corrosion resistance.
    Style E—Styles D, E, and H have a threaded hole on the back for supporting a hanger or routing ring.
    Style
    For Beam
    Shape
    For Thread
    Size
    For Max.
    Beam Thk.
    Wt. Cap.,
    lb.
    Mount
    Type
    Throat
    Dp.
    Lg.
    Wd.
    Ht.
    Threaded Rod
    Included
    Each
    Bottom Beam Mount
     
    Zinc-Plated Iron
    EFlat, TaperM10 × 1.5 mm3/4"525Clamp On1/2"1 5/8"1 5/8"1 3/4"No3173T5000000
    EFlat, TaperM6 × 1 mm1/2"275Clamp On1/2"1 1/2"1 1/8"1 1/2"No3173T200000
    EFlat, TaperM8 × 1.25 mm1/2"275Clamp On1/2"1 1/2"1 1/8"1 1/2"No3173T400000
     

    Easy-Position Beam Clamps for Pipe, Tube, and Conduit

    Image of Product. Front orientation. Contains Inset, MultipleImages. Beam Clamps. Easy-Position Beam Clamps for Pipe, Tube, and Conduit, Clamp On.

    Clamp On

    Suspend material at any angle from the beam. Clamps have a fixed jaw that secures to the beam and a hanger that swivels 360° to position material and accommodate for misalignment.
    Clamp On—Install clamp-on clamps by tightening the clamping screw. A threaded hole on the side of the clamp supports an additional hanger or routing ring.
    For OD
    Mount
    Type
    For Beam
    Shape
    Inch
    Metric,
    mm
    For Pipe
    Size
    For Max.
    Beam Thk.
    Wt. Cap.,
    lb.
    Range of
    Motion
    Threaded
    Hole Size
    Throat
    Dp.
    Surface to
    Pipe Center
    Lg.
    Wd.
    Ht.
    Each
    Bottom Beam Mount
     
    Zinc-Plated Steel
    Clamp OnFlat, Taper1 1/2"38—1/2"75360°1/4"-20
    		1/2"1 11/16"1 3/4"1"1 1/2"30015T1400000
    Clamp OnFlat, Taper1 11/16"431 1/4
    		1/2"75360°1/4"-20
    		1/2"1 13/16"1 3/4"1"1 1/2"30015T150000
    Clamp OnFlat, Taper1 7/8"481 1/2
    		1/2"75360°1/4"-20
    		1/2"2"1 3/4"1"1 1/2"30015T160000
     

    Leveling Washers for U-Channels

    Image of ProductInUse. Side1 orientation. Leveling Washers. Leveling Washers for U-Channels.
    Image of Product. Front orientation. Contains Annotated. Leveling Washers. Leveling Washers for U-Channels.
    Tapered to fit in a U-channel, these washers create a parallel bearing surface.
    Zinc-Plated Steel—Zinc-plated steel washers are coated for corrosion resistance in wet environments.
    Thk.,
    mm
    For Screw
    Size
    ID,
    mm
    Lg.,
    mm
    Wd.,
    mm
    (A)
    (B)
    Hardness
    Specs.
    Met
    Pkg.
    Qty.
    Pkg.
    Zinc-Plated Steel
    M8
    		9.022.022.03.82.0Rockwell B56DIN 4341092522A110000000
    M10
    		11.022.022.03.82.0Rockwell B56DIN 4341092522A12000000
    M12
    		14.030.026.04.92.5Rockwell B56DIN 434592522A13000000
    M16
    		18.036.032.05.93.0Rockwell B56DIN 434592522A14000000
    M20
    		22.044.040.07.03.5Rockwell B56DIN 434192522A1500000
     

    Leveling Washers for I-Beams

    Image of ProductInUse. Mounted on an I-Beam. Front orientation. Leveling Washers. Leveling Washers for I-Beams.
    Image of Product. Front orientation. Contains Annotated. Leveling Washers. Leveling Washers for I-Beams.

    Mounted

    on an

    I-Beam

    Commonly called beveled washers, these are tapered to fit inside an I-beam's flange to provide a parallel bearing surface.
    18-8 Stainless Steel—18-8 stainless steel washers have good chemical resistance and may be mildly magnetic. These washers are the most corrosion-resistant option.
    Zinc-Plated Steel—Zinc-plated steel washers are coated for corrosion resistance in wet environments.
    Galvanized Steel—Galvanized steel washers are ten times more corrosion resistant than zinc-plated washers.
    Thk.,
    mm
    For Screw
    Size
    ID,
    mm
    Wd.,
    mm
    (A)
    (B)
    Hardness
    Specs.
    Met
    Pkg.
    Qty.
    Pkg.
    18-8 Stainless Steel
    M8
    		9.022.04.61.5Rockwell B52DIN 435191146A17000000
    M10
    		11.022.04.61.5Rockwell B52DIN 435191146A1800000
    M12
    		14.026.06.22.0Rockwell B52DIN 435191146A1900000
    M16
    		18.032.07.52.5Rockwell B52DIN 435191146A2000000
    M20
    		22.040.09.23.0Rockwell B52DIN 435191146A21000000
    M24
    		26.056.010.83.0Rockwell B52DIN 435191146A23000000
     
    Zinc-Plated Steel
    M8
    		9.022.04.61.5Rockwell B52DIN 4351091146A10000000
    M10
    		11.022.04.61.5Rockwell B52DIN 4351091146A1100000
    M12
    		14.026.06.22.0Rockwell B52DIN 4351091146A12000000
    M16
    		18.032.07.52.5Rockwell B52DIN 4351091146A13000000
    M20
    		22.040.09.23.0Rockwell B52DIN 435591146A14000000
    M24
    		26.056.010.83.0Rockwell B52DIN 435191146A1600000
     
    Galvanized Steel
    M8
    		9.022.04.61.5Rockwell B52DIN 4351091146A24000000
    M10
    		11.022.04.61.5Rockwell B52DIN 435591146A2500000
    M12
    		14.026.06.22.0Rockwell B52DIN 435591146A2600000
    M16
    		18.032.07.52.5Rockwell B52DIN 435591146A27000000
    M20
    		22.040.09.23.0Rockwell B52DIN 435191146A28000000
    M24
    		26.056.010.83.0Rockwell B52DIN 435191146A3000000
     
    back to top