Fit these relays where standard spade-terminal relays are too big. You can connect them three ways. Plug them into a socket (sold separately), connect them with quick-disconnect terminals, or solder wires directly to the terminals. An LED indicator shows you the status of the relay, so you know it’s connected and wired correctly.

Relays that control 2 or more circuits have a lockable test button, so you can test their function. When you press the button, the relay switches contacts. Use this button when checking a relay for proper function before installing it, or when investigating issues with wired relays.

Relay sockets mount directly on 35 mm DIN rail (also known as DIN 3 rail) for fast installation. You can also mount them to a flat surface using screws.

For technical drawings and 3-D models, click on a part number.

Save space in your control cabinet. These narrow relays are often used for low-current switching applications, such as on small motors and pilot lights. They plug into a socket (sold separately) for quick installation.

Relay sockets mount directly on 35 mm DIN rail (also known as DIN 3 rail). Those with screw terminals connect and disconnect wire when you turn the screws. They can also mount to a flat surface. Those with spring-clamp terminals connect and disconnect to wires without needing to turn screws. Insert a screwdriver into the slot to release the spring clamp holding the wire in place.

For technical drawings and 3-D models, click on a part number.