Send power to your device using the inlet, then route power to another device through the outlet—all with standard IEC power cords. Compared to using separate receptacles, these combination connectors are quicker to install and have a more streamlined appearance. Snap the connector into your panel—tabs on the side hold them in place without needing fasteners. Then solder your power supply to the wire terminals for a secure, permanent bond. C13 receptacles are also known as Sheet F outlets.

Rated IP30, these connectors prevent objects greater than 2.5mm wide, such as screwdrivers, from touching internal components and accidentally shocking you. With Class I shock protection, they’re insulated and have a protective ground.

These connectors meet UL 94 V-0, which means they self-extinguish within 10 seconds if they catch fire, and won’t spread the fire by dripping. They’re also UL recognized, CE marked, CSA certified, and ENEC marked, so you know they meet stringent safety standards.

For technical drawings and 3-D models, click on a part number.

Distribute power from one electronic device to several others with these connectors. By housing multiple outlets in a single unit, they save space and time spent on installation. They’re compatible with IEC power cords, which are the industry standard for power connections. The outlets are C13 receptacles, also known as Sheet F outlets.

Wire these connectors into your device with the terminals on the back of each outlet. They mount to your device with snap-in tabs—no fasteners needed—but require a specific panel thickness and a precisely cut hole for secure mounting.

All meet international standards for safety. They are rated for Class I Shock Protection, meaning they have insulation and a protective ground.

Quick-disconnect terminals are faster to wire than solder connections. The terminals slide together with the quick-disconnect terminals on your wiring and are easily disconnected by hand, but still provide a strong hold. Rated IP30, these connectors prevent objects larger than 2.5 mm, such as screwdrivers, from making contact with a live circuit and shocking you. They also meet UL 94 V-0, so they’ll self-extinguish within 10 seconds if they catch fire and won’t spread flames from dripping.

For technical drawings and 3-D models, click on a part number.

Use these cords with computers, lab equipment, and office machines that have IEC connections.

Cords with a 90° elbow socket fit flush against equipment, so equipment can be pushed against a wall.

SPT cords have a flat cord shape so they fit in tight spaces.

SVT cords are ultra-flexible and as pliable as vacuum cleaner cords. They withstand repeated winding.

Use SJT cords in dry or damp environments.

All cords have a country-specific plug on one end and an IEC socket on the other end. Use them with computers, lab equipment, and office machines that have IEC connections.

Cords with a 90° elbow plug fit flush against a wall outlet, so they fit behind machinery or in areas where space is tight.

Cords with a 90° elbow socket fit flush against equipment, so equipment can be pushed against a wall.

Create a vibration-resistant connection—the socket on these cords securely locks onto any male receptacle and will not detach until manually unlocked. They also have a 90° elbow plug that fits flush against a wall outlet, so they fit behind machinery and in other areas where space is tight. Use them with computers, lab equipment, and office machines that have IEC connections.

Create a vibration-resistant connection—the socket on these cords securely locks onto any male receptacle and will not detach until manually unlocked. Use them with computers, lab equipment, and office machines that have IEC connections.

Power multiple devices from one power source. Use these splitters with computers, lab equipment, and office machines that have IEC connections.

Use SJT cords in dry or damp locations.

SVT cords are ultra-flexible and as pliable as vacuum cleaner cords. They withstand repeated winding.

The shielding blocks signal interference from nearby equipment and devices. Use these cords with computers, lab equipment, and office machines that have IEC connections.

SVT cords are ultra-flexible and as pliable as vacuum cleaner cords. They withstand repeated winding.

Use SJT cords in dry or damp locations.

Also known as hospital-grade cords, these cords have an extra-tight connection to prevent them from detaching. The plug is marked with a green dot. Use them with computers, lab equipment, and office machines that have IEC connections.

Cords with a 90° elbow socket fit flush against equipment, so equipment can be pushed against a wall.

Designed for indoor applications, these cords are often used to power appliances.

Use SJT cords in dry or damp locations.

All cords have a country-specific plug to power equipment on international outlets.

Cords with a 90° elbow plug fit flush against a wall outlet, so they fit behind machinery or in areas where space is tight.