Also known as snubbers, use these shock absorbers in low-load, high-cycle applications.

Accommodate changing loads and energy without manual adjustment.

Like the shocks in a car, these mount between two surfaces to minimize vibration and motion transfer caused by sudden impact.

For the heaviest loads, these springs have more than double the load capacity of High-Load Fastener-Mount Compression Springs. Secure by inserting a fastener through the hole at the base.

Flanges on the ends of these springs provide a flat mounting surface.

These bumpers are at a 90° angle to protect corners on equipment, walls, and docks from damage caused by carts, vehicles, and other moving objects. Install them with screws.

Install these bumpers with screws. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces.

These bumpers withstand temperatures up to 300° F, which is twice as high as our other load rated bumpers. Use them in applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, these bumpers absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Twist them into a threaded hole.

Twist these bumpers into a threaded hole. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces.

Make bumpers the size and shape you need. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. Press them into place with the adhesive backing.

A ridge on the stem provides a tighter grip than other push-in bumpers. Push the stem into a hole for quick installation. These bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.

Push the stem into a hole for quick installation. These bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.

Select these bumpers for applications that require specific load capacities. Use them as feet and spacers on instruments and small appliances to limit sliding, vibration, and noise. Press them into place with the adhesive backing. They're comparable to Bumpon bumpers.

A magnetic base makes it easy to attach, move, and replace these bumpers on metal surfaces. Use them for guarding, aligning, and positioning parts.

These bumpers withstand temperatures up to 300° F, which is at least twice as high as our other load rated bumpers. Use them in applications that require specific load capacities. All are reinforced with a base plate for strength. Often used as feet, spacers, and vibration dampers, these bumpers absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines and conveyors. Mount them on a threaded stud.

With a split design, you can easily place these bumpers on tubing, rods, machinery legs, control shafts, and levers to protect them from impact, dents, and scratches. Use the concealed screw to secure them in place.

Install these stops in wood or concrete floors to protect walls from large doors in warehouses and manufacturing areas.

Designed to withstand impact in high-traffic areas, these stops have an anchor that mounts in a hole and sets with grout. Install them in concrete floors to protect walls from large doors in warehouses and manufacturing areas.

Protect large swinging doors where carts and vehicles are used to push the door open. These polyethylene plastic bumpers are commonly used on two-way swinging doors.

The half-dome shape won't catch mops and scrubbers. Install these stops in wood or concrete floors.

Industrial-strength metal bumpers bounce back from impact caused by forklifts and small trucks. Install them individually, side-by-side, or one above the other on one or both sides of your door.

Keep sliding doors and panels from damaging walls and door frames.

The raised bulb adds cushioning to absorb more impact than other surface guards to protect walls and other flat surfaces from impact.

With a raised bulb to absorb greater impact than standard corner guards, these guards protect walls, cabinets, and other surfaces.

Combine corner guards, surface guards, and end caps to create a system that protects walls and equipment from impact and wear. Often used in offices, hospitals, and schools, these systems protect against damage from small carts and chairs.

The guards in this system have a metal core for added strength and stability. Combine corner guards and surface guards to create a system that protects walls and equipment from impact and wear. Often used in warehouse and manufacturing areas, these systems protect against damage from carts and vehicles.

In addition to protecting the bottom of a wall from damage, these bases create a finished look where the wall meets the floor. They're commonly used in offices, hospitals, and schools.

Use this film on metal and plastic parts, appliances, and electronic equipment for protection against damage during packaging, shipping, and installation.

These aluminum bases provide more impact protection than plastic bases. In addition to protecting the bottom of a wall from damage, they create a finished look where the wall meets the floor. They're commonly used in warehouse and manufacturing areas.

A two-piece design makes these mounts easier to install than one-piece mounts.

Install these mounts with a socket head cap screw—the counterbored hole ensures the screw sits flush with or below the top of the mount.