With a NEMA 4X rating, these lights resist degradation when exposed to corrosive liquids, withstand liquids sprayed during washdowns, and are dust tight. NEMA 4X is widely considered the standard NEMA rating. These lights are compatible with medium-base, screw-in CFL (compact fluorescent), halogen, incandescent, and LED bulbs (sold separately).

PTFE plastic lenses are impact resistant.

Tempered glass lenses are more durable than plastic lenses; they have a zinc-plated steel guard to protect them.

The gooseneck arm on this light allows you to direct light exactly where it's needed. It has a reflector that distributes light more evenly than other portable lights. A mounting clip at the base lets you attach it to a nearby surface. This light comes with a CFL (compact fluorescent) bulb; it is also compatible with medium-base, screw-in halogen, incandescent, and LED bulbs (sold separately). It cannot be sold to the regions listed due to local energy efficiency requirements and limits on mercury content.

For technical drawings and 3-D models, click on a part number.

Because these lights have a reflector, they distribute light more evenly than other portable lights. A mounting clip at the base lets you attach them to nearby surfaces.

Style A and B are compatible with medium-base, screw-in CFL (compact fluorescent), halogen, incandescent, and LED bulbs (sold separately).

Style C come with an LED bulb; however, are also compatible with medium-base, screw-in CFL (compact fluorescent), halogen, incandescent, and infrared bulbs.

Style D are compatible with medium-base, screw-in CFL (compact fluorescent), halogen, incandescent, infrared, and LED bulbs (sold separately).

Lights that cannot be sold to California do not meet local energy efficiency requirements.

For technical drawings and 3-D models, click on a part number.

Always have a flashlight on hand—these attach to a key ring. All have a nonslip grip to ensure a secure hold. All keychain flashlights were tested and rated to ANSI/NEMA FL 1 standards.

Incandescent lights are the traditional lighting choice. They cast a bull’s eye beam, where the center is brighter than the edges for long-distance illumination. Twist the head to change the beam from a wide floodlight to a narrow spotlight.

For technical drawings and 3-D models, click on a part number.

Also known as pendant lights, these fixtures hang from a cord. Rated for use in damp locations, these lights withstand humidity and moisture. They work with LED, CFL, halogen, and incandescent bulbs (sold separately).

Also known as pigtail holders. Temporarily wire these sockets to provide light during construction. They have a rubber lip that molds around bulbs to form a water-resistant seal.

Install sockets for medium (standard household) screw-in base light bulbs.

Styles A-C mount to outlet boxes.

Also known as jelly jar lights. These fixtures have a heat-resistant lens and a guard that protects the lens from breaking. They are CSA certified for hazardous locations where flammable/combustible gases, vapors, and liquids may be present. They are rated NEMA 4X for protection against corrosion and washdowns. Lights are sealed to keep moisture out. They can be hardwired to operate on any of the voltages listed. Some work with LED or incandescent bulbs (sold separately).

Styles 1, 2, 3, 5, and 6 can be used in environments where ignitable concentrations of flammable/combustible gases, vapors, and liquids or combustible dust occur infrequently, such as in the case of an accidental spill or failure of a ventilation system, and where combustible/ignitable fibers or flyings are present under normal operating conditions and/or during frequent equipment maintenance or failure. Rated for Class I, Division 2, Groups A, B, C, and D; Class II, Division 2, Groups F and G; and Class III, Divisions 1 and 2, these lights withstand acetylene, hydrogen, ethylene, propane, carbonaceous dusts, and nonconductive dusts.

Styles 4 and 7 can be used in environments where ignitable concentrations of hazardous material are present under normal operating conditions, and/or during frequent equipment maintenance or failure. Rated for Class I, Divisions 1 and 2, Groups C and D; Class II, Divisions 1 and 2, Groups E, F, and G; and Class III, Divisions 1 and 2, these lights withstand ethylene, propane, conductive or metal dusts, carbonaceous dusts, nonconductive dusts, and combustible/ignitable fibers or flyings.

Also known as jelly jar lights. These fixtures have a heat-resistant lens and a guard that protects the lens from breaking. Lights are sealed to keep out humidity and dripping, splashing, and falling liquids.

Lights without bulbs work with medium (standard household) screw-in base LED, CFL, halogen, and incandescent bulbs (sold separately).

Lights with a tempered glass lens are more impact resistant than those with a glass lens.

Designed to withstand heat and grease, these lights are often used in commercial cooking hoods. They are also known as hood lights. These fixtures work with LED, CFL, halogen, and incandescent bulbs (sold separately).

Lights with a guard protect the glass lens from breaking.

These lights swing out from the wall to illuminate loading docks and trailers. They have a steel arm, plastic lens, and switch. All have a cord with three-prong plug and operate on 120 volts AC. Lights have four mounting holes (hardware not included, except Style E includes hardware). All are yellow.

Styles A-D are compatible with medium-base CFL (compact fluorescent), halogen, and incandescent bulbs (sold separately). Some also work with LED bulbs. All have a zinc-plated steel guard to protect the lens.

Lights cannot be sold to the listed areas due to energy efficiency requirements.

Replacement light heads come with a steel guard to protect the lens. Steel heads are stronger and more durable than plastic heads. Plastic heads don’t heat up as much as steel heads, and won’t dent as easily.

Heads adjust to any angle to direct light where needed. No need for timers—a sensor automatically turns the light on at dusk and off at dawn. These lights work with LED, CFL, halogen, and incandescent bulbs (sold separately).

No need for wiring—these lights plug-in with a three-prong plug. Use these fixtures to illuminate outdoor areas such as building grounds and entrance signs with a narrow beam of directed light. Heads adjust to any angle to direct light where needed. Lights work with LED, CFL, halogen, and incandescent bulbs (sold separately). They cannot be sold to California due to local energy efficiency requirements.

Illuminate outdoor areas such as building grounds and entrance signs with a narrow beam of directed light. Heads adjust to direct light where needed.

Style B work with LED, CFL, halogen, and incandescent bulbs (sold separately). Lights with a zinc housing are more impact resistant than those with an aluminum housing.

Heads adjust to any angle to direct light where needed. These lights automatically turn on when the sensor detects motion. Lights turn off when an area is unoccupied.

Lights with built-in LEDs last longer, are more efficient, and generate less heat than other technologies.

Style B detect motion up to 70 feet away. They are compatible with LED, CFL, halogen, and incandescent bulbs (sold separately).

These lights are UL listed for Class I, Division 2, Groups A, B, C, and D, and Class II, Division 2, Groups F and G for use in environments where ignitable concentrations of hazardous material occur infrequently, such as in the case of an accidental spill or failure of a ventilation system. They withstand acetylene, hydrogen, ethylene, propane, carbonaceous dusts, and nonconductive dusts. Lights can be hardwired to operate on any of the voltages listed. They have a low-voltage disconnect so they won’t drain the backup battery. Use the test switch to check that the heads and battery are working properly. Heads adjust to any angle to direct light where needed. They cannot be sold to California, Vermont, or Oregon due to energy efficiency requirements.

An extra-wide lens that’s curved on the viewing side ensures edge-to-edge clarity.

Magnify and measure in one operation.

7X glass-lens magnifying glass has two lenses for distortion-free viewing. It includes a general purpose scale that measures circles from 0.002" to 0.0625"; radii from 1/16" to 3/8"; angles up to 90° in 5° increments; lengths up to 0.5" in 0.005" increments; lengths up to 10 mm in 0.2 mm increments; and line widths from 0.016" to 0.250".

10X plastic-lens magnifying glass comes with a detachable scale on the eyepiece that's graduated by 1/64" and 0.5 mm. The lens has a scratch-resistant coating.

Optional thread accuracy scale measures the following threads per inch: 50, 32, 28, 24, 20, 18, 16, 14, and 8.

Inspect dim or dark areas with these illuminated mirrors.

Incandescent mirrors have a thumb wheel on the handle to adjust the mirror angle up to 90°.

Optional direct reflection mirror snaps onto incandescent mirrors for a wider field of view.