Avoid overfilling—these indicators pop up when your tank is almost full.

Indicators with a polypropylene float have a plastic window to protect the indicator’s movement and keep it working properly. When you see the indicator behind the overfill alert warning, you'll know your tank is almost full.

Alarms flash and sound when your tank is almost full.

For technical drawings and 3-D models, click on a part number.

Shut-off valves stop flow so you can clean and replace gauge glass without removing these indicators from your equipment.

316 stainless steel indicators are more corrosion resistant than brass indicators.

Indicators with automatic shut-off will temporarily close if the gauge glass breaks. The valves must be closed manually for permanent shut-off.

Monitor liquid level in applications that have vibration, high pressures, and high temperatures. These indicators have steel chambers, glass windows, and seals made of fiber and SBR rubber to resist corrosion and withstand higher temperatures than other level indicators. Use them with a wide variety of liquids, such as petroleum, chemicals, and natural gas. All meet ASME BPVC.VIII.1 safety standards for pressure vessels, so they’re approved for use in low-pressure water and steam applications too. Their gauge is made of reflex glass, which shows the level of liquid behind the glass, but not the liquid’s color or any particulates in it. Also known as armored level gauges.

Add shut-off valves to stop flow with the turn of a wheel. They help you access indicators in order to clean or replace the glass or the entire indicator. These valves also stop flow automatically if the indicator glass breaks, preventing the loss of fluid. However, for permanent shut-off you must close them manually. Put one valve on top of your indicator and one on the bottom for a 90° connection between the indicator and your tank. To connect the female threads on your indicator to the female gauge threads on the shut-off valve, use a male pipe nipple (not included).

For technical drawings and 3-D models, click on a part number.

Monitor food, brewery, chemical, pharmaceutical, and biotech processing lines with these sights that attach to quick-clamp fittings for fast installation and easy removal for cleaning. All have a one-piece design, so there are no crevices where bacteria can grow. A quick-clamp fitting, gasket, and tube fitting are required (sold separately).

304 stainless steel sights have a ring that's embedded around their shatter-resistant plastic window. This design protects the sights from chipping or cracking while under the stress of the quick-clamp fitting. All withstand harsh cleaners and sanitizers for clean-in-place (CIP) and steam-in-place (SIP) applications. They do not contain Bisphenol A (BPA), Bisphenol B (BPB), or BPA derivatives (BPX), which are chemicals that can contaminate your process lines. All meet ASME BPE design standards for bioprocessing equipment that ensure purity and safety.

For superior strength and reliability, choose 2205 stainless steel sights. All have a glass window that’s melted around a high-strength ring, so they won’t shatter, leak, or lose their shape under high pressure, heat, chemicals, or impact. They withstand harsh cleaners and sanitizers for clean-in-place (CIP) and steam-in-place (SIP) applications. USP Class VI and TUV Rheinland Certified, these sights meet safety standards in the U.S. and Europe. They also meet DIN standards for glass materials used in sights, ASTM standards for materials used in boilers and pressure vessels, and ASME BPE design standards for bioprocessing equipment that ensure purity and safety.

For technical drawings and 3-D models, click on a part number.

For use with water, hydraulic fluid, and diesel fuel, install these gauges through the top of your tank. All have an indicator that moves up as the tank fills. To see how full your tank is and if you need to fill or drain it, check the indicator against the graduation marks. Plastic protects the indicator's movement, saving you from inaccurate readings.

Alarms can be set to flash and sound at levels critical to your system.

Remote-reading displays let you check readings from up to 100 ft. away. They have an alarm that sounds when the level is too high or too low.