Monitor liquid level in applications that have vibration, high pressures, and high temperatures. These indicators have steel chambers, glass windows, and seals made of fiber and SBR rubber to resist corrosion and withstand higher temperatures than other level indicators. Use them with a wide variety of liquids, such as petroleum, chemicals, and natural gas. All meet ASME BPVC.VIII.1 safety standards for pressure vessels, so they’re approved for use in low-pressure water and steam applications too. Their gauge is made of reflex glass, which shows the level of liquid behind the glass, but not the liquid’s color or any particulates in it. Also known as armored level gauges.

Add shut-off valves to stop flow with the turn of a wheel. They help you access indicators in order to clean or replace the glass or the entire indicator. These valves also stop flow automatically if the indicator glass breaks, preventing the loss of fluid. However, for permanent shut-off you must close them manually. Put one valve on top of your indicator and one on the bottom for a 90° connection between the indicator and your tank. To connect the female threads on your indicator to the female gauge threads on the shut-off valve, use a male pipe nipple (not included).

For technical drawings and 3-D models, click on a part number.

For use with water, hydraulic fluid, and diesel fuel, install these gauges through the top of your tank. All have an indicator that moves up as the tank fills. To see how full your tank is and if you need to fill or drain it, check the indicator against the graduation marks. Plastic protects the indicator's movement, saving you from inaccurate readings.

Alarms can be set to flash and sound at levels critical to your system.

Remote-reading displays let you check readings from up to 100 ft. away. They have an alarm that sounds when the level is too high or too low.

With a stainless steel float and float rod, these gauges resist corroding from chemicals. Their indicator moves up as your tank fills. Check the indicator against the graduation marks to see how full your tank is and if you need to fill or drain it. Plastic protects the indicator's movement, saving you from inaccurate readings.

Alarms can be set to flash and sound at levels critical to your system.

Remote-reading displays let you check readings from up to 100 ft. away. They have an alarm that sounds when the level is too high or too low.

For technical drawings and 3-D models, click on a part number.

Install these gauges through the top of your tank to monitor diesel fuel, fuel oil, or gasoline level.

Gauges with float rods are UL Listed for flammable liquids. For shallower tanks, cut the float rod ½” to 1” shorter than your tank depth to prevent it from touching the bottom.

Optional remote-reading dials use two wires to send a signal to a receiver or dashboard for monitoring fuel levels remotely.

For technical drawings and 3-D models, click on a part number.