Maximum Torque Maximum Torque |
|---|
Minimum Torque Minimum Torque |
|---|
Overall Length Overall Length |
|---|
Graduations Graduations |
|---|
Certification Certification |
|---|
|
Ratcheting or Nonratcheting Ratcheting or Nonratcheting |
|---|
|
Display Display |
|---|
|
Torque-Measuring Direction Torque-Measuring Direction |
|---|
|
For Use With For Use With | Show |
|---|
|
For Use With For Use With | Hide |
|---|
|
Power Source Power Source |
|---|
|
Material Material |
|---|
|
Finish Finish |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
|---|
Container Type Container Type |
|---|
|
About Torque Tools
More
Economy Torque-Measuring Wrenches
These wrenches have an accuracy of ±2.0%. The display shows torque as it's measured and maximum torque reached. Use to determine fastener torque specifications as well as to identify the torque required to loosen tightened fasteners. To fasten to a specific value, set the desired torque—lights and an audible alarm indicate when target has been reached or exceeded. Wrenches come with a calibration certificate that is traceable to NIST and includes the test measurements that confirm accuracy.
Note: Accuracy ratings do not apply to the lower 20% of the torque range.
Accuracy | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Square Drive Size | Torque Range | Graduations | Clockwise | Counterclockwise | Overall Lg. | Ratcheting or Nonratcheting | Material | Batteries Included | Each | |
in.-lbs., ft.-lbs., Nm | ||||||||||
| 1/2" | 13.5 to 135 Nm 180 to 1,800 in.-lbs. 15 to 150 ft.-lbs. | 6 in.-lbs. 0.5 ft.-lbs. 0.6 Nm | ±2.0% | ±2.0% | 19" | Ratcheting | Chrome-Plated Steel | No | 0000000 | 0000000 |
Torque-Measuring Wrenches
Measure with an accuracy of ±2.0%. These wrenches display torque as it’s measured and the maximum torque reached. Use to determine fastener torque specifications as well as to identify the torque required to loosen tightened fasteners. To fasten to a specific value, set the desired torque—lights and an audible alarm indicate when target has been reached or exceeded. Wrenches come with a calibration certificate that is traceable to NIST and includes the test measurements that confirm accuracy.
Note: Accuracy ratings do not apply to the lower 20% of the torque range.
Accuracy | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Square Drive Size | Torque Range | Graduations | Clockwise | Counterclockwise | Overall Lg. | Ratcheting or Nonratcheting | Material | Grip Material | Batteries Included | Each | |
in.-lbs., ft.-lbs., Nm | |||||||||||
| 1/4" | 13.2 to 264 in.-lbs. 1.1 to 22 ft.-lbs. 1.5 to 30 Nm | 0.1 in.-lbs. 0.01 ft.-lbs. 0.1 Nm | ±2% | ±3% | 15 5/8" | Ratcheting | Chrome-Plated Steel | Plastic | Yes | 0000000 | 0000000 |
| 3/8" | 60 to 1,188 in.-lbs. 5 to 99 ft.-lbs. 6.8 to 135 Nm | 1 in.-lbs. 0.01 ft.-lbs. 0.1 Nm | ±2% | ±3% | 16 11/16" | Ratcheting | Chrome-Plated Steel | Plastic | Yes | 0000000 | 000000 |
| 1/2" | 150 to 3,000 in.-lbs. 12.5 to 250 ft.-lbs. 17 to 340 Nm | 1 in.-lbs. 0.01 ft.-lbs. 0.1 Nm | ±2% | ±3% | 25 3/16" | Ratcheting | Chrome-Plated Steel | Plastic | Yes | 0000000 | 000000 |
High-Accuracy Torque-Measuring Wrenches
Trust the precision of your measurements—these wrenches are accurate to ±1%. They display torque as it’s measured and the maximum torque reached. Use to determine fastener torque specifications as well as to identify the torque required to loosen tightened fasteners. To fasten to a specific value, set the desired torque—lights and an audible alarm indicate when target has been reached or exceeded. The display rotates so you can read it at any angle. Wrenches come with a calibration certificate that is traceable to NIST and includes the test measurements that confirm accuracy.
Accuracy | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Square Drive Size | Torque Range | Graduations | Clockwise | Counterclockwise | Overall Lg. | Material | Grip Material | Batteries Included | Each | |
in.-lbs., ft.-lbs., Nm | ||||||||||
| 1/4" | 7.5 to 75 in.-lbs. 0.63 to 6.25 ft.-lbs. 0.84 to 8.5 Nm | 0.01 in.-lbs. 0.01 ft.-lbs. 0.01 Nm | ±1% | ±1% | 11" | Chrome-Plated Steel | Plastic | Yes | 0000000 | 0000000 |
| 1/4" | 10 to 100 in.-lbs. 0.83 to 8.3 ft.-lbs. 1.1 to 11.1 Nm | 0.01 in.-lbs. 0.01 ft.-lbs. 0.01 Nm | ±1% | ±1% | 11" | Chrome-Plated Steel | Plastic | Yes | 0000000 | 000000 |
| 3/8" | 25 to 250 in.-lbs. 2.1 to 20.8 ft.-lbs. 2.8 to 28.2 Nm | 0.01 in.-lbs. 0.01 ft.-lbs. 0.01 Nm | ±1% | ±1% | 11" | Chrome-Plated Steel | Plastic | Yes | 0000000 | 000000 |
| 3/8" | 60 to 600 in.-lbs. 5 to 50 ft.-lbs. 6.8 to 67.8 Nm | 0.01 in.-lbs. 0.01 ft.-lbs. 0.1 Nm | ±1% | ±1% | 11" | Chrome-Plated Steel | Plastic | Yes | 0000000 | 000000 |
| 1/2" | 300 to 3,000 in.-lbs. 25 to 250 ft.-lbs. 33.8 to 338 Nm | 1 in.-lbs. 0.1 ft.-lbs. 0.1 Nm | ±1% | ±1% | 22" | Chrome-Plated Steel | Plastic | Yes | 0000000 | 000000 |
| 3/4" | 720 to 7,200 in.-lbs. 60 to 600 ft.-lbs. 81 to 813 Nm | 1 in.-lbs. 0.1 ft.-lbs. 0.1 Nm | ±1% | ±1% | 47" | Chrome-Plated Steel | Plastic | Yes | 0000000 | 00000000 |
High-Accuracy Horizontal-Scale Torque-Measuring Wrenches
Trust the precision of your measurements—these wrenches are accurate to ±2%. The scale has a main pointer that shows torque as it’s being applied and a memory pointer that indicates the maximum torque reached. Use to determine fastener torque specifications as well as to identify the torque required to loosen tightened fasteners. Wrenches come with a calibration certificate that is traceable to NIST and includes the test measurements that confirm accuracy.
Note: Accuracy ratings do not apply to the lower 20% of the torque range.
Accuracy | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Square Drive Size | Torque Range | Graduations | Clockwise | Counterclockwise | Overall Lg. | Ratcheting or Nonratcheting | Material | Grip Material | Each | |
Ball Grip | ||||||||||
in.-lbs. | ||||||||||
| 1/4" | 0 to 10 in.-lbs. | 0.5 in.-lbs. | ±2% | ±2% | 6 3/4" | Nonratcheting | Chrome-Plated Steel | Plastic | 0000000 | 0000000 |
| 3/8" | 0 to 25 in.-lbs. | 1 in.-lbs. | ±2% | ±2% | 7" | Nonratcheting | Chrome-Plated Steel | Plastic | 0000000 | 000000 |
| 3/8" | 0 to 50 in.-lbs. | 2 in.-lbs. | ±2% | ±2% | 6 3/4" | Nonratcheting | Chrome-Plated Steel | Plastic | 0000000 | 000000 |
| 3/8" | 0 to 100 in.-lbs. | 5 in.-lbs. | ±2% | ±2% | 7 1/4" | Nonratcheting | Chrome-Plated Steel | Plastic | 0000000 | 000000 |
| 3/8" | 0 to 200 in.-lbs. | 10 in.-lbs. | ±2% | ±2% | 9 3/4" | Nonratcheting | Chrome-Plated Steel | Plastic | 0000000 | 000000 |
in.-oz. | ||||||||||
| 1/4" | 0 to 32 in.-oz. | 2 in.-oz. | ±2% | ±2% | 6 3/4" | Nonratcheting | Chrome-Plated Steel | Plastic | 0000000 | 000000 |
| 1/4" | 0 to 80 in.-oz. | 5 in.-oz. | ±2% | ±2% | 6 7/8" | Nonratcheting | Chrome-Plated Steel | Plastic | 0000000 | 000000 |
| 1/4" | 0 to 160 in.-oz. | 10 in.-oz. | ±2% | ±2% | 6 3/4" | Nonratcheting | Chrome-Plated Steel | Plastic | 0000000 | 000000 |
Nm | ||||||||||
| 3/8" | 0 to 2.5 Nm | 0.1 Nm | ±2% | ±2% | 7" | Nonratcheting | Chrome-Plated Steel | Plastic | 0000000 | 000000 |
| 3/8" | 0 to 5 Nm | 0.2 Nm | ±2% | ±2% | 6 3/4" | Nonratcheting | Chrome-Plated Steel | Plastic | 0000000 | 000000 |
| 3/8" | 0 to 12 Nm | 0.5 Nm | ±2% | ±2% | 7 1/4" | Nonratcheting | Chrome-Plated Steel | Plastic | 0000000 | 000000 |
| 3/8" | 0 to 22 Nm | 1 Nm | ±2% | ±2% | 9 3/4" | Nonratcheting | Chrome-Plated Steel | Plastic | 0000000 | 000000 |
Cushion Grip | ||||||||||
in.-lbs. | ||||||||||
| 3/8" | 0 to 300 in.-lbs. | 10 in.-lbs. | ±2% | ±2% | 15 1/2" | Nonratcheting | Chrome-Plated Steel | Plastic | 0000000 | 000000 |
| 3/8" | 0 to 600 in.-lbs. | 25 in.-lbs. | ±2% | ±2% | 15 1/2" | Nonratcheting | Chrome-Plated Steel | Plastic | 0000000 | 000000 |
ft.-lbs. | ||||||||||
| 1/2" | 0 to 100 ft.-lbs. | 5 ft.-lbs. | ±2% | ±2% | 17" | Nonratcheting | Chrome-Plated Steel | Plastic | 0000000 | 000000 |
| 1/2" | 0 to 150 ft.-lbs. | 5 ft.-lbs. | ±2% | ±2% | 20" | Nonratcheting | Chrome-Plated Steel | Plastic | 0000000 | 000000 |
Nm | ||||||||||
| 3/8" | 0 to 34 Nm | 1 Nm | ±2% | ±2% | 15 1/2" | Nonratcheting | Chrome-Plated Steel | Plastic | 0000000 | 000000 |
| 3/8" | 0 to 70 Nm | 2 Nm | ±2% | ±2% | 15 1/2" | Nonratcheting | Chrome-Plated Steel | Plastic | 0000000 | 000000 |
| 1/2" | 0 to 140 Nm | 5 Nm | ±2% | ±2% | 17" | Nonratcheting | Chrome-Plated Steel | Plastic | 0000000 | 000000 |
| 1/2" | 0 to 210 Nm | 10 Nm | ±2% | ±2% | 20" | Nonratcheting | Chrome-Plated Steel | Plastic | 0000000 | 000000 |
Dial Torque-Measuring Wrenches
A main pointer on the dial shows torque as it’s being applied and a memory pointer indicates the maximum torque reached. Use these wrenches to determine fastener torque specifications as well as to identify the torque required to loosen tightened fasteners. They come with a calibration certificate that is traceable to NIST and includes the test measurements that confirm accuracy.
Note: Accuracy ratings do not apply to the lower 20% of the torque range.
Accuracy | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Square Drive Size | Torque Range | Graduations | Clockwise | Counterclockwise | Overall Lg. | Ratcheting or Nonratcheting | Material | Grip Material | Each | |
in.-lbs. | ||||||||||
| 1/4" | 0 to 75 in.-lbs. | 1 in.-lbs. | ±2% | ±2% | 9 15/16" | Nonratcheting | Chrome-Plated Steel | Metal | 0000000 | 0000000 |
| 3/8" | 0 to 300 in.-lbs. | 5 in.-lbs. | ±2% | ±2% | 9 15/16" | Nonratcheting | Chrome-Plated Steel | Metal | 0000000 | 000000 |
in.-lbs., Nm | ||||||||||
| 1/4" | 0 to 15 in.-lbs. 0 to 1.7 Nm | 0.5 in.-lbs. 0.05 Nm | ±2% | ±2% | 9 15/16" | Nonratcheting | Chrome-Plated Steel | Metal | 0000000 | 000000 |
| 1/4" | 0 to 30 in.-lbs. 0 to 3.5 Nm | 1 in.-lbs. 0.1 Nm | ±2% | ±2% | 9 15/16" | Nonratcheting | Chrome-Plated Steel | Metal | 0000000 | 000000 |
| 1/4" | 0 to 75 in.-lbs. 0 to 8.4 Nm | 1 in.-lbs. 0.2 Nm | ±2% | ±2% | 9 15/16" | Nonratcheting | Chrome-Plated Steel | Metal | 0000000 | 000000 |
| 3/8" | 0 to 150 in.-lbs. 0 to 17 Nm | 5 in.-lbs. 0.5 Nm | ±2% | ±2% | 9 15/16" | Nonratcheting | Chrome-Plated Steel | Metal | 0000000 | 000000 |
| 3/8" | 0 to 300 in.-lbs. 0 to 32 Nm | 5 in.-lbs. 0.5 Nm | ±2% | ±2% | 9 15/16" | Nonratcheting | Chrome-Plated Steel | Metal | 0000000 | 000000 |
| 3/8" | 0 to 600 in.-lbs. 0 to 60 Nm | 20 in.-lbs. 1 Nm | ±2% | ±2% | 12 1/2" | Nonratcheting | Chrome-Plated Steel | Metal | 0000000 | 000000 |
ft.-lbs., Nm | ||||||||||
| 3/8" | 0 to 50 ft.-lbs. 0 to 70 Nm | 1 ft.-lbs. 1 Nm | ±2% | ±2% | 12 1/2" | Nonratcheting | Chrome-Plated Steel | Metal | 0000000 | 000000 |
| 1/2" | 0 to 175 ft.-lbs. 0 to 250 Nm | 5 ft.-lbs. 5 Nm | ±4% | ±4% | 21 1/2" | Nonratcheting | Chrome-Plated Steel | Rubber | 0000000 | 000000 |
| 1/2" | 0 to 250 ft.-lbs. 0 to 340 Nm | 10 ft.-lbs. 10 Nm | ±2% | ±2% | 24" | Nonratcheting | Chrome-Plated Steel | Metal | 0000000 | 000000 |
| 3/4" | 0 to 350 ft.-lbs. 0 to 480 Nm | 5 ft.-lbs. 10 Nm | ±2% | ±2% | 30" | Nonratcheting | Chrome-Plated Steel | Metal | 0000000 | 000000 |
| 3/4" | 0 to 600 ft.-lbs. 0 to 800 Nm | 20 ft.-lbs. 20 Nm | ±2% | ±2% | 40" | Nonratcheting | Chrome-Plated Steel | Metal | 0000000 | 000000 |
| 1" | 0 to 1,000 ft.-lbs. 0 to 1,360 Nm | 20 ft.-lbs. 20 Nm | ±2% | ±2% | 67 3/4" | Nonratcheting | Chrome-Plated Steel | Metal | 0000000 | 000000 |
Horizontal-Scale Torque-Measuring Wrenches
Measure with an accuracy of ±7%. The scale's pointer moves to show torque as it's applied. Use these wrenches to determine fastener torque specifications as well as to identify the torque required to loosen tightened fasteners. They are also known as beam torque wrenches.
Note: Accuracy ratings do not apply to the lower 20% of the torque range.
Accuracy | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Square Drive Size | Torque Range | Graduations | Clockwise | Counterclockwise | Overall Lg. | Ratcheting or Nonratcheting | Material | Grip Material | Each | |
Cushion Grip | ||||||||||
ft.-lbs., Nm | ||||||||||
| 1/2" | 0 to 150 ft.-lbs. 0 to 190 Nm | 5 ft.-lbs. 27 Nm | ±7% | ±7% | 20" | Nonratcheting | Chrome-Plated Steel | Plastic | 0000000 | 000000 |