Filter by
Mount Type
DFARS Specialty Metals
Export Control Classification Number (ECCN)
REACH
RoHS
Hardness Rating
Hardness
About Vibration-Damping Mounts
Choose the right vibration-damping mounts to protect equipment from damage and reduce noise.
Shock-Absorbing Air Spring Vibration-Damping Mounts
Neutralize shock and vibration from your machine no matter how hard it heaves or hammers. These mounts use air pressure rather than a steel frame to support a load. That means four times the deflection and vibration control of a typical bolt-down mount. Fill them with air and stick them under heavy machinery to keep floors intact, seals tight, and fasteners secure. They’ll also soak up the vibration from floors and mounting plates that bumps optical and other precision tools out of alignment.
Multipurpose Neoprene with Threaded-Insert Mount
 |
Resist wear and tear well enough for most applications. They won't break down when exposed to oil, grease, and gasoline, so they're a good choice for motors and pumps.
Base | Mounting | Air Inlet | ||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Thread Size | Cap. per Mount, lb. | Deflection @ Cap. | Shear Cap. per Mount | Deflection @ Shear Cap. | Overall Ht. | Dia. | Ht. | Lg. | Wd. | Temp. Range, ° F | Fasteners Included | No. of Holes | Hole Dia. | Hole Ctr.-to-Ctr. | Max. Pressure, psi | Thread Size | Thread Type | Base Material | Each | |||
| 3/8"-16 | 100 | 1" | Not Rated | Not Rated | 2.5" | 2.88" | 2" | 3" | 3" | -20 to 180 | No | 4 | 0.3" | 2.38" | 60 | 0.305"-32 | Schrader | Aluminum | 00000000 | 0000000 | ||
| 1/2"-13 | 300 | 1" | Not Rated | Not Rated | 2.45" | 4.14" | 1.91" | 4.19" | 4.19" | -20 to 180 | No | 4 | 0.3" | 3.5" | 60 | 0.305"-32 | Schrader | Aluminum | 00000000 | 000000 | ||
| 1/2"-13 | 600 | 1.5" | Not Rated | Not Rated | 3.5" | 5" | 2.94" | 5.12" | 5.12" | -20 to 180 | No | 4 | 0.3" | 4.25" | 80 | 0.305"-32 | Schrader | Aluminum | 00000000 | 000000 | ||
| 1/2"-13 | 1,200 | 1.5" | Not Rated | Not Rated | 3.5" | 6.74" | 2.94" | 6.88" | 6.88" | -20 to 180 | No | 4 | 0.3" | 6" | 80 | 0.305"-32 | Schrader | Aluminum | 00000000 | 000000 | ||
| 5/8"-11 | 2,400 | 1.25" | Not Rated | Not Rated | 3.5" | 9.66" | 2.94" | 10" | 10" | -20 to 180 | No | 4 | 0.56" | 8.5" | 80 | 0.305"-32 | Schrader | Aluminum | 00000000 | 000000 | ||
| 5/8"-11 | 4,800 | 1.5" | Not Rated | Not Rated | 3.5" | 13.31" | 2.94" | 13.5" | 13.5" | -20 to 180 | No | 4 | 0.56" | 12" | 80 | 0.305"-32 | Schrader | Aluminum | 00000000 | 000000 | ||
| M10 × 1.5 mm | 100 | 0.5" | Not Rated | Not Rated | 2.5" | 2.89" | 1.94" | 3" | 3" | -20 to 180 | No | 4 | 0.3" | 2.38" | 85 | 0.305"-32 | Schrader | Aluminum | 00000000 | 00000 | ||
| M12 × 1.75 mm | 300 | 0.5" | Not Rated | Not Rated | 2.5" | 4.14" | 1.94" | 4.19" | 4.19" | -20 to 180 | No | 4 | 0.3" | 3.5" | 85 | 0.305"-32 | Schrader | Aluminum | 00000000 | 00000 | ||
| M12 × 1.75 mm | 550 | 0.5" | Not Rated | Not Rated | 3.5" | 5" | 2.94" | 5.13" | 5.13" | -20 to 180 | No | 4 | 0.3" | 4.25" | 85 | 0.305"-32 | Schrader | Aluminum | 00000000 | 000000 | ||
| M12 × 1.75 mm | 1,200 | 0.5" | Not Rated | Not Rated | 3.5" | 6.74" | 2.94" | 6.88" | 6.88" | -20 to 180 | No | 4 | 0.3" | 6" | 85 | 0.305"-32 | Schrader | Aluminum | 00000000 | 000000 | ||
| M16 × 2 mm | 2,400 | 0.5" | Not Rated | Not Rated | 3.5" | 9.66" | 2.94" | 10" | 10" | -20 to 180 | No | 4 | 0.56" | 8.5" | 85 | 0.305"-32 | Schrader | Aluminum | 00000000 | 000000 | ||
