A curved plastic tip fits into bearing seals, narrow holes in housings, and around small parts in 3D printers and other machinery. Use these syringes to control the direction of flow so you don't make a mess.

Attach a needle with a luer lock connection to dispense contents.

Use these components to create an air-powered dispensing system. A foot pedal controls the amount released.

The ergonomic design helps reduce fatigue when dispensing one-part adhesives, sealants, and fluids.

Thanks to the nickel-plated brass base on these needles, they can be cleaned, washed, boiled, or sterilized.

These flexible needles can be cut to length.

The needles in these sets connect to adhesive cartridges, grease guns, and other dispensers with threaded connections.

Choose a needle-tip squeeze bottle for your most precise dispensing applications.

Powered by liquid, use these to pump a second liquid or to produce emulsions, elevate water, and transport grains and other small particles.

Use plant steam to pump liquids and gases, prime pumps, and remove fumes.

A 316 stainless steel housing provides corrosion resistance for a long life in harsh environments. These pumps meter a consistent amount of liquid within ±2% of the maximum flow.

Automatically control output from a distance using 4‐20 mA or external-pulse signals. These pumps meter a consistent amount of liquid within ±2% of the maximum flow.

These pumps can be used with pressures four times higher than standard pumps for chemicals.

With a footprint that's only a few inches in any direction, these pumps fit into compact systems to dispense small amounts of acids, cleaning fluids, and other chemicals. They're often used in sterilization, photochemical, and water treatment systems.

Also known as peristaltic pumps and tubing pumps, these maintain a fixed flow rate.

Automatically control output from a distance using variety of analog and digital signals, including 4-20mA and external pulse signals.

Use these pumps for high-pressure output of antifreeze, hydraulic oil, and motor oil.

Also known as injection quills, use these in applications where the line can be shut down to perform maintenance and cleaning.

Fill these cartridges with one-part adhesive.

A quick disconnect bayonet connection attaches these holders to a gun to hold an adhesive cartridge in place.

Similar to a caulk gun, these guns are good for small jobs.

Use these guns to dispense two-part adhesives. Do not use them with 3M dual cartridges.

Dispense two-part adhesives with compressed air. Use these guns only with 3M dual cartridges.

To simultaneously mix and dispense two-part adhesives, attach these mixer nozzles to a dual cartridge.

Adapt a standard caulk gun to dispense two-part adhesives from 1.69-oz. cartridges.

Use these plungers with a 3M dispensing gun for adhesives in dual cartridges.

Choose from cone tips, L-tips, and T-tips.

Convert glue guns for use with 8" long glue sticks.

With five temperature range options, these guns can dispense 3M adhesives with different melting points.

Dispense up to 3 times as much adhesive per hour as our standard hot-melt glue guns.

These small guns get into areas larger guns can't.

Melt and dispense hot-melt glue sticks for sealing and assembling.

A motor advances the glue stick for a continuous flow of glue.

Minimize mess and waste—when you release the handle on these guns, the rod retracts a bit to stop flow automatically.

Adjust air-flow for precise control and smooth material flow—these guns have a built-in pressure regulator with a control knob.

These flexible extensions add length and bend 180° to get into hard-to-reach areas.

Achieve the perfect bead every time.

Immerse the nozzle in the sealant and pull back the rod to fill.

Penetrate gaskets, sealed bearings, and joints to deliver grease to precise locations.

Penetrate gaskets, sealed bearings, and joints to deliver grease to precise locations.