Search Results
For Shaft Diameter For Shaft Diameter |
|---|
ID ID |
|---|
Shaft Mount Type Shaft Mount Type |
|---|
|
For Mounted Bearing Manufacturer For Mounted BearingManufacturer |
|---|
|
For Mounted Bearing Model Number For Mounted BearingModel Number |
|---|
Lubrication Lubrication |
|---|
|
Lubricant Lubricant |
|---|
|
OD OD |
|---|
Material Material |
|---|
|
Overall Thickness Overall Thickness |
|---|
Ball Material Ball Material |
|---|
|
Static Radial Load Capacity Static Radial Load Capacity |
|---|
|
Maximum Ball Swivel Maximum Ball Swivel |
|---|
|
|
Housing Thickness Housing Thickness |
|---|
Insert Material Insert Material |
|---|
|
Static Thrust Load Capacity Static Thrust Load Capacity |
|---|
|
|
About Rod Ends
More
About Ball and Roller Bearings
More
Insert Bearings
Swap out worn inserts instead of replacing the entire mounted unit. Use the manufacturer model number on your existing mounted bearing to choose a compatible insert. Inserts must be used with the manufacturer model number specified.
Bearings with eccentric lock have a collar that grips in one direction and releases in the other. They are easier to install onto shafts than bearings with a set screw grip and require less adjustment over time. Use with shafts that spin in one direction only.
For technical drawings and 3-D models, click on a part number.
| For Shaft Dia. | For Mounted Bearing Model No. | Each | |
SKF Steel Insert Bearings | |||
|---|---|---|---|
Shaft Mount Type: Set Screw | |||
| 1/2" | F2B 008-RM, FYT 1/2 RM | 0000000 | 000000 |
| 1/2" | F4B 008-TF, FY 1/2 TF | 0000000 | 00000 |
| 3/4" | F2B 012-RM, F4B 012-RM, FYT 3/4 RM | 0000000 | 00000 |
| 1" | F2B 100-RM, F4B 100-RM, FYT 1. RM | 0000000 | 00000 |
| 1 1/8" | F2B 102 TF, F4B 102-TF, FY 1.1/8 TF, FYT 1.1/8 TF | 0000000 | 00000 |
| 1 3/16" | F2B 103-RM, F4B 103-RM, FYT 1.3/16 RM | 0000000 | 00000 |
| 1 1/4" | F2B 104-RM, F4B 104-RM, FYT 1.1/4 RM | 0000000 | 00000 |
| 1 1/4" | F2B 104S-RM, F4B 104S-RM | 0000000 | 00000 |
| 1 3/8" | F4B 106-TF, FY 1.3/8 TF, FYT 1.3/8 TF | 0000000 | 00000 |
| 1 7/16" | F2B 107-RM, F4B 107-RM, FYT 1.7/16 RM | 0000000 | 00000 |
| 1 1/2" | F2B 108-TF, F4B 108-TF, FYT 1.1/2 RM | 0000000 | 00000 |
| 1 3/4" | F2B 112-RM, F4B 112-RM, FYT 1.3/4 RM | 0000000 | 00000 |
| 1 15/16" | F2B 115-TF, F4B 115-TF, FYT 1.15/16 RM | 0000000 | 00000 |
| 2" | F2B 200-RM, F4B 200-RM, FYT 2. RM | 0000000 | 00000 |
| 2 1/4" | F4B 204-TF, FY 2.1/4 TF, FYT 2.1/4 TF | 0000000 | 000000 |
| 2 1/2" | F4B 208-TF, FY 2.1/2 TF, FYT 2.1/2 TF | 0000000 | 000000 |
Shaft Mount Type: Eccentric Lock | |||
| 5/8" | P2BL 010-FM, SYH 5/8 FM | 00000000 | 00000 |
| 3/4" | P2BL 012-FM, SYH 3/4 FM | 00000000 | 00000 |
| 7/8" | P2BL 014-FM, SYH 7/8 FM | 00000000 | 00000 |
| 1" | P2BL 100-FM, SYH 1. FM | 00000000 | 00000 |
| 1 1/4" | P2BL 104-FM, SYH 1.1/4 FM | 00000000 | 00000 |
| 1 1/4" | SYH 1.1/4 AFM | 00000000 | 00000 |
| 1 3/8" | P2BL 106-FM, SYH 1.3/8 FM | 00000000 | 00000 |
| 1 7/16" | P2BL 107-FM, SYH 1.7/16 FM | 00000000 | 00000 |
| 1 1/2" | P2BL 108-WF, SYH 1.1/2 WF | 00000000 | 00000 |
| 1 15/16" | P2BL 115-WF, SYH 1.15/16 WF | 00000000 | 00000 |
| 2" | P2BL 200-FM, SYH 2. FM | 00000000 | 00000 |
| 2 3/16" | SYH 2.3/16 FM | 00000000 | 00000 |
Sealmaster Steel Insert Bearings | |||
Shaft Mount Type: Set Screw | |||
| 1/2" | FB-8, NP-8, NPL-8, SC-8, SF-8, SFT-8, ST-8, TB-8 | 00000000 | 00000 |
| 1/2" | FB-8-HT, NP-8-HT, NPL-8-HT, SC-8-HT, SF-8-HT, SFT-8-HT, ST-8-HT, TB-8-HT | 00000000 | 00000 |
| 5/8" | FB-10, NP-10, NPL-10, SC-10, SF-10, SFT-10, ST-10, TB-10 | 00000000 | 00000 |
| 5/8" | FB-10-HT, NP-10-HT, NPL-10-HT, SC-10-HT, SF-10-HT, SFT-10-HT, ST-10-HT, TB-10-HT | 00000000 | 00000 |
| 3/4" | FB-12, NP-12, NPL-12, SC-12, SF-12, SFT-12, ST-12, TB-12 | 00000000 | 00000 |
| 3/4" | FB-12-HT, NP-12-HT, NPL-12-HT, SC-12-HT, SF-12-HT, SFT-12-HT, ST-12-HT, TB-12-HT | 00000000 | 00000 |
| 7/8" | FB-14, NP-14, NPG-14-6, NPG-14-9, NPL-14, SC-14, SF-14, SFT-14, SP-14, ST-14, STH-14-6, STH-14-9, TB-14 | 00000000 | 00000 |
| 15/16" | FB-15, NP-15, NPG-15-6, NPG-15-9, NPL-15, SC-15, SF-15, SFT-15, SP-15, ST-15, STH-15-6, STH-15-9, TB-15 | 00000000 | 00000 |
| 1" | FB-16, NP-16, NPG-16-6, NPG-16-9, NPL-16, SC-16, SF-16, SFT-16, SP-16, ST-16, STH-16-6, STH-16-9, TB-16 | 00000000 | 00000 |
| 1" | FB-16-HT, NP-16-HT, NPG-16-6-HT, NPG-16-9-HT, NPL-16-HT, SC-16-HT, SF-16-HT, SFT-16-HT, SP-16-HT, ST-16-HT, STH-16-6-HT, STH-16-9-HT, TB-16-HT | 00000000 | 000000 |
| 1 1/8" | FB-18, NP-18, NPG-18-6, NPG-18-9, NPL-18, SC-18, SCHB-18, SEHB-18, SF-18, SFC-18, SFT-18, SP-18, ST-18, STH-18-6, STH-18-9, TB-18 | 00000000 | 000000 |
| 1 3/16" | FB-19, NP-19, NPG-19-6, NPG-19-9, NPL-19, SC-19, SF-19, SFC-19, SFT-19, SP-19, ST-19, STH-19-6, STH-19-9, TB-19 | 00000000 | 00000 |
| 1 1/4" | FB-20, NP-20, NPG-20-12, NPG-20-9, NPL-20, SC-20, SCHB-20, SEHB-20, SF-20, SFC-20, SFT-20, SP-20, ST-20, STH-20-12, STH-20-9, TB-20 | 00000000 | 000000 |
| 1 1/4" | FB-20-HT, NP-20-HT, NPG-20-12-HT, NPG-20-9-HT, NPL-20-HT, SC-20-HT, SCHB-20-HT, SEHB-20-HT, SF-20-HT, SFC-20-HT, SFT-20-HT, SP-20-HT, ST-20-HT, STH-20-12-HT, STH-20-9-HT, TB-20-HT | 00000000 | 000000 |
| 1 1/4" | FB-20R, NP-20R, NPL-20R, SC-20R, SF-20R, SFC-20R, SFT-20R, SP-20R, ST-20R, TB-20R | 00000000 | 000000 |
| 1 3/8" | FB-22, NP-22, NPG-22-12, NPG-22-9, NPL-22, SC-22, SCHB-22, SEHB-22, SF-22, SFC-22, SFT-22, SP-22, ST-22, STH-22-12, STH-22-9, TB-22 | 00000000 | 000000 |
| 1 7/16" | FB-23, NP-23, NPG-23-12, NPG-23-9, NPL-23, SC-23, SF-23, SFC-23, SFT-24, SP-23, ST-23, STH-23-12, STH-23-9, TB-23 | 00000000 | 000000 |
| 1 1/2" | NP-24, NPG-24-12, NPG-24-18, NPL-24, SC-24, SCHB-24, SEHB-24, SF-24, SFC-24, SFT-24, SP-24, ST-24, STH-24-12, STH-24-18, TB-24 | 00000000 | 000000 |
| 1 1/2" | NP-24-HT, NPG-24-12-HT, NPG-24-18-HT, NPL-24-HT, SC-24-HT, SCHB-24-HT, SEHB-24-HT, SF-24-HT, SFC-24-HT, SFT-24-HT, SP-24-HT, ST-24-HT, STH-24-12-HT, STH-24-18-HT, TB-24-HT | 00000000 | 000000 |
| 1 11/16" | NP-27, NPG-27-12, NPG-27-18, NPL-27, SC-27, SF-27, SFC-27, SFT-27, SP-27, ST-27, STH-27-12, STH-27-18, TB-27 | 00000000 | 000000 |
| 1 3/4" | NP-28, NPL-28, SC-28, SFC-28, SFT-28, SP-28, ST-28, TB-28 | 00000000 | 000000 |
| 1 7/8" | FB-30, NP-30, NPL-30, SC-30, SCHB-30, SEHB-30, SFC-30, SFT-30, SP-30, ST-30, TB-30 | 00000000 | 000000 |
| 1 15/16" | FB-31, NP-31, NPG-31-12, NPG-31-18, NPL-32, SC-31, SCHB-31, SEHB-31, SF-31, SFC-31, SFT-31, SP-31, ST-31, STH-31-12, STH-31-18, TB-31 | 00000000 | 000000 |
| 2" | NP-32, NPG-32-12, NPG-32-18, NPL-32, SC-32, SF-32, SFC-32, SFT-32, SP-32, ST-32, STH-32-12, STH-32-18 | 00000000 | 000000 |
| 2" | NP-32-HT, NPG-32-12-HT, NPG-32-18-HT, NPL-32-HT, SC-32-HT, SF-32-HT, SFC-32-HT, SFT-32-HT, SP-32-HT, ST-32-HT, STH-32-12-HT, STH-32-18-HT | 00000000 | 000000 |
| 2 3/16" | NP-35, NPG-35-12, NPG-35-18, NPL-35, SC-35, SF-35, SFC-35, SFT-35, SP-35, ST-35, STH-35-12, STH-35-18 | 00000000 | 000000 |
| 2 1/4" | NP-36, NPL-36, SC-36, SCHB-36, SEHB-36, SFC-36, SP-36, ST-36 | 00000000 | 000000 |
| 2 7/16" | NP-39, NPG-39-12, NPG-39-18, NPL-39, SC-39, SCHB-39, SEHB-39, SF-39, SFC-39, SP-39, ST-39, STH-39-12, STH-39-18 | 00000000 | 000000 |
| 20mm | FB-204, NP-204, NPL-204, SC-204, SF-204, SFT-204, ST-204, TB-204 | 00000000 | 00000 |
| 25mm | FB-205, NP-205, NPG-205-6, NPG-205-9, NPL-205, SC-205, SF-205, SFT-205, SP-205, ST-205, STH-205-6, STH-205-9, TB-205 | 00000000 | 00000 |
| 30mm | FB-206, NP-206, NPG-206-6, NPG-206-9, NPL-206, SC-206, SCHB-206, SEHB-206, SF-206, SFC-206, SFT-206, SP-206, ST-206, STH-206-6, STH-206-9, TB-206 | 00000000 | 000000 |
| 35mm | FB-207, NP-207, NPG-207-12, NPG-207-9, NPL-207, SC-207, SCHB-207, SEHB-207, SF-207, SFC-207, SFT-207, SP-207, ST-207, STH-207-12, STH-207-9, TB-207 | 00000000 | 000000 |
| 40mm | NP-208, NPG-208-12, NPG-28-18, NPL-208, SC-208, SCHB-208, SEHB-208, SF-208, SFC-208, SFT-208, SP-208, ST-208, STH-208-12, STH-208-18, TB-208 | 00000000 | 000000 |
| 45mm | NP-209, NPG-209-12, NPG-209-18, NPL-209, SC-209, SF-209, SFC-209, SFT-209, SP-209, ST-209, STH-209-12, STH-209-18, TB-209 | 00000000 | 000000 |
| 50mm | FB-210, NP-210, NPG-210-12, NPG-210-18, NPL-210, SC-210, SCHB-210, SEHB-210, SF-210, SFC-210, SFT-210, SP-210, ST-210, STH-210-12, STH-210-18, TB-210 | 00000000 | 000000 |
| 55mm | NP-211, NPL-211, SC-211, SFC-211, SFT-211, SP-211, ST-211 | 00000000 | 000000 |
| 60mm | NP-212, NPL-212, SC-212, SCHB-212, SEHB-212, SFC-212, SP-212, ST-212 | 00000000 | 000000 |
| 70mm | SC-214, SFC-214, SP-214, ST-214 | 00000000 | 000000 |
| 75mm | NP-215, SC-215, SCHB-215, SEHB-215, SFC-215, SP-215, ST-215 | 00000000 | 000000 |
Lubrication-Free Swivel Joints
A slippery PTFE liner reduces friction without the oily mess. Also known as spherical bearings, they support angular misalignment. Press them into a hole or housing where a ball joint rod end won’t fit.
For technical drawings and 3-D models, click on a part number.
| ID | OD | O'all Thick. | Housing Thick. | Max. Ball Swivel | Static Radial Load Cap., lbs. | Temp. Range, °F | Material | Each | |
| 3/16" | 9/16" | 9/32" | 7/32" | 22° | 4,850 | -65° to 275° | Alloy Steel | 00000000 | 000000 |
| 1/4" | 21/32" | 11/32" | 1/4" | 27° | 7,400 | -65° to 275° | Alloy Steel | 00000000 | 00000 |
| 5/16" | 3/4" | 3/8" | 9/32" | 24° | 9,700 | -65° to 275° | Alloy Steel | 00000000 | 00000 |
| 3/8" | 13/16" | 13/32" | 5/16" | 20° | 12,600 | -65° to 275° | Alloy Steel | 00000000 | 00000 |
| 7/16" | 29/32" | 7/16" | 11/32" | 16° | 14,150 | -65° to 275° | Alloy Steel | 00000000 | 00000 |
| 1/2" | 1" | 1/2" | 25/64" | 19° | 19,850 | -65° to 275° | Alloy Steel | 00000000 | 00000 |
| 9/16" | 1 3/32" | 9/16" | 7/16" | 19° | 24,900 | -65° to 275° | Alloy Steel | 00000000 | 00000 |
| 5/8" | 1 3/16" | 5/8" | 1/2" | 17° | 31,900 | -65° to 275° | Alloy Steel | 00000000 | 00000 |
| 3/4" | 1 7/16" | 3/4" | 19/32" | 18° | 47,850 | -65° to 275° | Alloy Steel | 00000000 | 00000 |
| 7/8" | 1 9/16" | 7/8" | 45/64" | 19° | 62,900 | -65° to 275° | Alloy Steel | 00000000 | 00000 |
| 1" | 1 3/4" | 1" | 51/64" | 20° | 82,800 | -65° to 275° | Alloy Steel | 00000000 | 00000 |
| 1" | 2" | 1" | 25/32" | 18° | 106,200 | -65° to 275° | Alloy Steel | 00000000 | 00000 |
| 1 1/4" | 2 3/8" | 1 3/16" | 15/16" | 17° | 151,050 | -65° to 275° | Alloy Steel | 00000000 | 00000 |
| 1 1/2" | 2 3/4" | 1 3/8" | 1 3/32" | 17° | 203,900 | -65° to 275° | Alloy Steel | 00000000 | 00000 |
| 2" | 3 1/2" | 1 3/4" | 1 3/8" | 17° | 325,550 | -65° to 275° | Alloy Steel | 00000000 | 000000 |
| 6mm | 18mm | 9mm | 7mm | 25° | 7,950 | -30° to 300° | Zinc-Plated Alloy Steel | 0000000 | 00000 |
| 8mm | 22mm | 12mm | 9mm | 28° | 13,250 | -30° to 300° | Zinc-Plated Alloy Steel | 0000000 | 00000 |
| 10mm | 26mm | 14mm | 11mm | 27° | 18,600 | -30° to 300° | Zinc-Plated Alloy Steel | 0000000 | 00000 |
| 12mm | 30mm | 16mm | 12mm | 26° | 25,350 | -30° to 300° | Zinc-Plated Alloy Steel | 0000000 | 00000 |
| 14mm | 34mm | 19mm | 14mm | 32° | 31,850 | -30° to 300° | Zinc-Plated Alloy Steel | 0000000 | 00000 |
| 16mm | 38mm | 21mm | 15mm | 30° | 39,850 | -30° to 300° | Zinc-Plated Alloy Steel | 0000000 | 00000 |
Swivel Joints
Also known as spherical bearings, swivel joints support angular misalignment. Press them into a hole or housing where a ball joint rod end won’t fit. Lubrication is required.
For technical drawings and 3-D models, click on a part number.
| ID | OD | O'all Thick. | Housing Thick. | Max. Ball Swivel | Static Radial Load Cap., lbs. | Material | Each | |
| 3/16" | 9/16" | 9/32" | 7/32" | 22° | 4,850 | Alloy Steel | 00000000 | 00000 |
| 1/4" | 21/32" | 11/32" | 1/4" | 27° | 7,400 | Alloy Steel | 00000000 | 0000 |
| 5/16" | 3/4" | 3/8" | 9/32" | 24° | 9,700 | Alloy Steel | 00000000 | 0000 |
| 3/8" | 13/16" | 13/32" | 5/16" | 20° | 12,600 | Alloy Steel | 00000000 | 0000 |
| 7/16" | 29/32" | 7/16" | 11/32" | 16° | 14,150 | Alloy Steel | 00000000 | 0000 |
| 1/2" | 1" | 1/2" | 25/64" | 19° | 19,850 | Alloy Steel | 00000000 | 0000 |
| 9/16" | 1 3/32" | 9/16" | 7/16" | 19° | 24,900 | Alloy Steel | 00000000 | 0000 |
| 5/8" | 1 3/16" | 5/8" | 1/2" | 17° | 31,900 | Alloy Steel | 00000000 | 0000 |
| 3/4" | 1 7/16" | 3/4" | 19/32" | 18° | 47,850 | Alloy Steel | 00000000 | 00000 |
| 7/8" | 1 9/16" | 7/8" | 45/64" | 19° | 62,900 | Alloy Steel | 00000000 | 00000 |
| 1" | 1 3/4" | 1" | 51/64" | 20° | 82,800 | Alloy Steel | 00000000 | 00000 |
| 1" | 2" | 1" | 25/32" | 18° | 106,200 | Alloy Steel | 00000000 | 00000 |
| 1 1/4" | 2 3/8" | 1 3/16" | 15/16" | 17° | 151,050 | Alloy Steel | 00000000 | 00000 |
| 1 1/2" | 2 3/4" | 1 3/8" | 1 3/32" | 17° | 203,900 | Alloy Steel | 00000000 | 00000 |
| 2" | 3 1/2" | 1 3/4" | 1 3/8" | 17° | 325,550 | Alloy Steel | 00000000 | 000000 |
| 6mm | 18mm | 9mm | 7mm | 25° | 7,950 | Alloy Steel | 0000000 | 0000 |
| 8mm | 22mm | 12mm | 9mm | 28° | 13,250 | Alloy Steel | 0000000 | 00000 |
| 10mm | 26mm | 14mm | 11mm | 27° | 18,600 | Alloy Steel | 0000000 | 00000 |
| 12mm | 30mm | 16mm | 12mm | 26° | 25,350 | Alloy Steel | 0000000 | 00000 |
| 14mm | 34mm | 19mm | 14mm | 32° | 31,850 | Alloy Steel | 0000000 | 00000 |
| 16mm | 38mm | 21mm | 15mm | 30° | 39,850 | Alloy Steel | 0000000 | 00000 |
Corrosion-Resistant Swivel Joints
Stronger than plastic models, these stainless steel swivel joints are also more corrosion resistant than steel joints. Ball is heat treated for strength. Also known as spherical bearings, they support angular misalignment. Press them into a hole or housing where a ball joint rod end won’t fit.
For technical drawings and 3-D models, click on a part number.
| ID | OD | O'all Thick. | Housing Thick. | Max. Ball Swivel | Static Radial Load Cap., lbs. | Material | Each | |
| 5/32" | 15/32" | 1/4" | 3/16" | 18° | 3,200 | 303 Stainless Steel | 00000000 | 000000 |
| 3/16" | 9/16" | 9/32" | 7/32" | 22° | 4,400 | 303 Stainless Steel | 00000000 | 00000 |
| 1/4" | 21/32" | 11/32" | 1/4" | 27° | 6,700 | 303 Stainless Steel | 00000000 | 00000 |
| 5/16" | 3/4" | 3/8" | 9/32" | 24° | 9,200 | 303 Stainless Steel | 00000000 | 00000 |
| 3/8" | 13/16" | 13/32" | 5/16" | 20° | 12,400 | 303 Stainless Steel | 00000000 | 00000 |
| 7/16" | 29/32" | 7/16" | 11/32" | 16° | 14,900 | 303 Stainless Steel | 00000000 | 00000 |
| 1/2" | 1" | 1/2" | 25/64" | 19° | 17,900 | 303 Stainless Steel | 00000000 | 00000 |
| 9/16" | 1 3/32" | 9/16" | 7/16" | 19° | 23,700 | 303 Stainless Steel | 00000000 | 00000 |
| 5/8" | 1 3/16" | 5/8" | 1/2" | 17° | 32,000 | 303 Stainless Steel | 00000000 | 00000 |
| 3/4" | 1 7/16" | 3/4" | 19/32" | 18° | 48,000 | 303 Stainless Steel | 00000000 | 00000 |
| 7/8" | 1 9/16" | 7/8" | 45/64" | 19° | 69,000 | 303 Stainless Steel | 00000000 | 00000 |
| 1" | 1 3/4" | 1" | 51/64" | 20° | 83,000 | 303 Stainless Steel | 00000000 | 00000 |
Lubrication-Free Corrosion-Resistant Swivel Joints
A slippery PTFE liner reduces wear and eliminates the need for lubrication. Made of stainless steel, these swivel joints are stronger than plastic models and more corrosion resistant than steel ones. Also known as spherical bearings, they support angular misalignment. Press them into a hole or housing where a ball joint rod end won’t fit.
For technical drawings and 3-D models, click on a part number.
| ID | OD | O'all Thick. | Housing Thick. | Max. Ball Swivel | Static Radial Load Cap., lbs. | Temp. Range, °F | Material | Each | |
| 3/16" | 9/16" | 9/32" | 7/32" | 20° | 3,950 | -65° to 275° | 303 Stainless Steel | 00000000 | 000000 |
| 1/4" | 21/32" | 11/32" | 1/4" | 20° | 6,000 | -65° to 275° | 303 Stainless Steel | 00000000 | 00000 |
| 5/16" | 3/4" | 3/8" | 9/32" | 20° | 8,750 | -65° to 275° | 303 Stainless Steel | 00000000 | 00000 |
| 3/8" | 13/16" | 13/32" | 5/16" | 18° | 10,500 | -65° to 275° | 303 Stainless Steel | 00000000 | 00000 |
| 7/16" | 29/32" | 7/16" | 11/32" | 16° | 13,200 | -65° to 275° | 303 Stainless Steel | 00000000 | 00000 |
| 1/2" | 1" | 1/2" | 25/64" | 16° | 17,900 | -65° to 275° | 303 Stainless Steel | 00000000 | 00000 |
| 5/8" | 1 3/16" | 5/8" | 1/2" | 16° | 30,500 | -65° to 275° | 303 Stainless Steel | 00000000 | 00000 |
| 3/4" | 1 7/16" | 3/4" | 19/32" | 16° | 46,400 | -65° to 275° | 303 Stainless Steel | 00000000 | 00000 |
| 7/8" | 1 9/16" | 7/8" | 45/64" | 16° | 62,200 | -65° to 275° | 303 Stainless Steel | 00000000 | 00000 |
| 1" | 1 3/4" | 1" | 51/64" | 18° | 82,200 | -65° to 275° | 303 Stainless Steel | 00000000 | 00000 |
Extended-Life Swivel Joints
Specially designed lubrication channels and integral seals allow these joints to last up to three times longer than other swivel joints. Also known as spherical bearings, they support angular misalignment. Press into a hole or housing where a ball joint rod end won’t fit. All have seals to keep grease in and contaminants out. Joints come greased and can be lubricated through a hole in the housing without removing the load.
For technical drawings and 3-D models, click on a part number.
| ID | OD | O'all Thick. | Housing Thick. | Max. Ball Swivel | Static Radial Load Cap., lbs. | Max. Temp., °F | Material | Each | |
| 3/4" | 1 1/4" | 21/32" | 9/16" | 14° | 21,200 | 250° | Bearing Steel | 0000000 | 000000 |
| 7/8" | 1 7/16" | 49/64" | 21/32" | 14° | 28,800 | 250° | Bearing Steel | 0000000 | 00000 |
| 1" | 1 5/8" | 7/8" | 3/4" | 14° | 37,700 | 250° | Bearing Steel | 0000000 | 00000 |
| 1 1/4" | 2" | 1 3/32" | 15/16" | 14° | 58,800 | 250° | Bearing Steel | 0000000 | 00000 |
| 1 3/8" | 2 3/16" | 1 3/16" | 1 1/32" | 14° | 69,800 | 250° | Bearing Steel | 0000000 | 00000 |
| 1 1/2" | 2 7/16" | 1 5/16" | 1 1/8" | 14° | 84,800 | 250° | Bearing Steel | 0000000 | 00000 |
| 1 3/4" | 2 13/16" | 1 17/32" | 1 5/16" | 14° | 115,400 | 250° | Bearing Steel | 0000000 | 00000 |
| 2" | 3 3/16" | 1 3/4" | 1 1/2" | 14° | 150,900 | 250° | Bearing Steel | 0000000 | 000000 |
| 2 1/2" | 3 15/16" | 2 3/16" | 1 7/8" | 14° | 235,500 | 250° | Bearing Steel | 0000000 | 000000 |
| 3" | 4 3/4" | 2 5/8" | 2 1/4" | 14° | 339,500 | 250° | Bearing Steel | 0000000 | 000000 |
Lightweight Swivel Joints
These nylon swivel joints are 80% lighter than steel swivel joints with better corrosion resistance. Also known as spherical bearings, they support angular misalignment. Press them into a hole or housing where a ball joint rod end won’t fit.
For technical drawings and 3-D models, click on a part number.
| ID | OD | O'all Thick. | Housing Thick. | Max. Ball Swivel | Static Radial Load Cap., lbs. | Temp. Range, °F | Material | Specifications Met | Each | |
| 3/16" | 9/16" | 5/16" | 7/32" | 34° | 220 | -20° to 175° | Nylon Plastic | ISO 12240-1 | 0000000 | 00000 |
| 1/4" | 21/32" | 3/8" | 1/4" | 30° | 330 | -20° to 175° | Nylon Plastic | ISO 12240-1 | 0000000 | 0000 |
| 5/16" | 3/4" | 7/16" | 9/32" | 29° | 450 | -20° to 175° | Nylon Plastic | ISO 12240-1 | 0000000 | 0000 |
| 3/8" | 13/16" | 1/2" | 5/16" | 25° | 620 | -20° to 175° | Nylon Plastic | ISO 12240-1 | 0000000 | 0000 |
| 1/2" | 1 1/16" | 5/8" | 25/64" | 25° | 950 | -20° to 175° | Nylon Plastic | ISO 12240-1 | 0000000 | 0000 |
| 3/4" | 1 7/16" | 7/8" | 19/32" | 23° | 1,900 | -20° to 175° | Nylon Plastic | ISO 12240-1 | 0000000 | 0000 |
Thrust-Rated Swivel Joints
A unique design allows these joints to support heavy one-direction thrust loads as well as combined radial/thrust loads. Also known as spherical bearings, you can press them into tight spots where a rod end shank won’t fit or mount them in a drilled hole or a rod end blank. Lubrication is required.
For technical drawings and 3-D models, click on a part number.
| ID | OD | O'all Thick. | Housing Thick. | Static Radial Load Cap., lbs. | Static Thrust Load Cap., lbs. | Material | Each | |
| 1/2" | 7/8" | 5/16" | 3/16" | 4,000 | 5,200 | Bearing Steel | 0000000 | 000000 |
| 5/8" | 1 1/16" | 3/8" | 1/4" | 6,900 | 8,700 | Bearing Steel | 0000000 | 00000 |
| 3/4" | 1 1/4" | 7/16" | 5/16" | 10,500 | 12,600 | Bearing Steel | 0000000 | 00000 |
| 7/8" | 1 7/16" | 1/2" | 3/8" | 14,900 | 17,600 | Bearing Steel | 0000000 | 00000 |
| 1" | 1 5/8" | 5/8" | 7/16" | 19,600 | 22,200 | Bearing Steel | 0000000 | 00000 |
| 1 1/4" | 2" | 3/4" | 9/16" | 32,000 | 35,400 | Bearing Steel | 0000000 | 00000 |
| 1 3/8" | 2 3/16" | 7/8" | 5/8" | 35,900 | 42,900 | Bearing Steel | 0000000 | 00000 |
| 1 1/2" | 2 7/16" | 15/16" | 5/8" | 44,500 | 51,900 | Bearing Steel | 0000000 | 00000 |
| 1 3/4" | 2 13/16" | 1 1/16" | 13/16" | 61,600 | 69,300 | Bearing Steel | 0000000 | 000000 |
| 2" | 3 3/16" | 1 1/4" | 15/16" | 82,500 | 91,700 | Bearing Steel | 0000000 | 000000 |