Also known as mungo anchors, these have large fins that prevent rotation.

Fins prevent these anchors from spinning during installation.

Precisely align, level, and adjust spacing on fasteners, shafts, and machinery with these shims, which are color-coded by thickness for easy identification.

Keep slotted shims in a variety of thicknesses on hand with these sets, which are color-coded by thickness for easy identification. The slot lets you insert, remove, and adjust the shims without disassembling your machinery.

Use these thick shims to align cabinets, doors, and windows, or for other rough leveling.

Clips on these shims hold them together when stacked, and they are color coded by thickness for easy identification. Designed to fit around screws, they are commonly used in window, door, and cabinet installations.

Slide these shims behind your door’s hinge to align it in the jamb.

The slot lets you install these rigid shims around screws.

The textured surface of these thick shims keeps them from sliding apart when stacked. Use them to align cabinets, doors, and windows, or for other rough leveling.

Designed to fit into 37° flared connections such as those found on JIC and SAE fittings, these plugs protect internally threaded connections from contaminants during fabrication and storage.

Safeguard internally threaded BSPT connections from contaminants during fabrication and storage.

Keep equipment safe from electrical currents with these plugs that have a surface resistivity of less than 10¹² ohms.

The hollow construction allows these plugs to compress for a snug fit in threaded and unthreaded holes.

Keep hollow tapered plugs of various sizes on hand to solve whatever problems arise. The hollow construction allows these plugs to compress for a snug fit in threaded and unthreaded holes of varying diameters.

Sized to fit small openings, these tiny plugs fit snugly but can be removed easily using the flange. Their tapered design fits a range of hole diameters.

Sized to fit small openings, these tiny plugs fit snugly but can be removed easily using the flange. They withstand temperatures up to 470° F, which makes them good for electroplating, paint baking, and powder-coating applications. All are tapered to fit a range of hole diameters.

Push these plugs into an opening and friction holds them in place.

Flexible ridges securely hold these plugs in place and allow them to fit a range of hole sizes.

Vents in the top allow air circulation and permit heat and fumes to escape. These plugs have tapered prongs that snap into the hole to securely hold them in place.

These plugs are see-through to provide visibility and light transmission. They have wings that expand against the sides of the hole to lock them in place.

The wings on these plugs expand against the sides of a hole to form a liquid-tight seal. Pierce the plugs with round wire, cable, or tubing and they function as a grommet to create insulated holes.

Slide these flexible vinyl caps on and they conform for a snug fit.

A long, textured pull tab provides a sure grip for quick removal even when wearing gloves.

Commonly used on shipping tubes, these caps have a square head to prevent round objects from rolling during shipping and storage.

Keep equipment safe from electrical currents with these caps that have a surface resistivity of less than 10¹² ohms.

With a surface resistivity of less than 10⁵ ohms, these caps not only dissipate electrical charges, but can be used as an electrical shield.

Keep tapered caps of various sizes on hand to solve whatever problems arise. These flexible plastic caps are tapered to fit a variety of unthreaded and threaded objects.

Made of rigid plastic, these caps provide more wear resistance to the ends of angle iron than vinyl caps but are not as flexible.

Guard the corners of fragile materials such as glass and mirrors.

Slide these flexible vinyl caps on and they conform for a snug fit.

Squeeze the dome top to remove these caps. They're commonly used as thread protectors.

Push these caps onto pipe and fittings, then tear their tab to break the seal for easy removal.

Designed for propane tanks such as those on forklifts and grills, these caps protect tank valves during storage and transit. Push the caps onto the valves, then tear their tab to break the seal for easy removal.

Conceal and protect the tops of socket head or button head screws.

To conceal and protect the entire screw head, insert your screw through the hole in the base and snap on the top.

Stick these caps on the raised surfaces of flanges or other flat surfaces for extra protection during transport and storage.

Stretch these caps over flared edges such as flanged tubing and valve handles.

Push the stem into a hole for quick installation. These bumpers are commonly used as feet on instruments and bench-top equipment to keep them from sliding. They're also good as spacers between sheets of material. Also known as stem and grommet bumpers.

All of these bumpers are reinforced with an embedded washer or base plate for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines. Install them with screws.

These bumpers are at a 90° angle to protect corners on equipment, walls, and docks from damage caused by carts, vehicles, and other moving objects. Install them with screws.