A black-phosphate finish provides mild corrosion resistance.

Forming the strongest hold of any of our threaded inserts, these inserts have a distorted internal thread to lock screws into place and keys that drive into surrounding material to prevent slipping and rotating.

These inserts come with an installation tool. Drive the keys into the surrounding material for a more secure hold than thread-locking inserts.

These assortments include various sizes of thread-locking inserts.

Adhesive on both the internal and external threads keeps these inserts in place and holds screws tight.

Steel inserts have high strength for durability.

Ridges on the barrel of these inserts make them less likely to split hardwood than inserts with prongs. They're often used in wood that has been cut across the growth rings.

Six prongs around the barrel of these inserts provide a strong hold and prevent them from loosening and twisting.

Use where vibration is a concern—these tee nut inserts have distorted threads that lock screws in place.

Also known as clinch style captive nuts, press these nuts into a drilled or punched hole with an arbor press or similar pressure tool.

These press-fit nuts have a nylon insert that grips threads to resist loosening.

About twice as strong as aluminum rivet nuts, these steel rivet nuts are zinc plated for mild corrosion resistance.

About twice as strong as aluminum rivet nuts, these low-profile rivet nuts have a cadmium or tin-zinc plating for corrosion resistance.

About twice as strong as aluminum rivet nuts, these rivet nuts are zinc plated for mild corrosion resistance.

These rivet nuts are mildly corrosion resistant.

A PVC coating minimizes the chance of scratching the surface of your material. These rivet nuts are more corrosion resistant than zinc-plated steel rivet nuts.

These nuts can be used in channels and tight spaces where round-base weld nuts won't fit.

A smooth base provides more contact with the mating surface than weld nuts with projections.

A smooth base provides more contact with the mating surface than weld nuts with projections.

Projections on the base concentrate the weld and provide room for heat to dissipate.

Weld these nuts to flat and uneven uncoated steel surfaces for a strong permanent hold.

Threads float inside the retainer so you can install a bolt at a slight angle to align with off center parts.

These nuts have three mounting holes to accept screws and rivets for use with thin materials.

Create strong joints in round tubes.

A zinc-plated finish gives these steel inserts mild corrosion resistance.

A zinc plating provides corrosion resistance in wet environments.

A zinc plating provides corrosion resistance in wet environments.

Drive these tools with a hammer to expand anchors.

An adjustable stop allows you to set anchors at consistent depths. Use with a hammer.

Create a strong joint in a blind hole.

A ribbed-shaped body holds the nut in place so it won't move when tightening a screw. Assortments contain rivet nuts, mandrels, nosepieces, and a plier-style installation tool.

These tools come with carbide inserts installed. When one edge of the insert dulls, rotate it to use a sharp edge.

These tools come with one high-speed steel insert for use on steel and stainless steel and one high-speed steel insert for use on softer materials, such as aluminum and brass. When one point of an insert dulls, rotate it to use a sharp point.

These holders conform to ANSI standards.

Use these tools to enlarge existing holes to precise diameters. They come with an insert installed. When one edge of the insert dulls, rotate it to use a sharp edge.

More durable than plastic plugs, these provide the most protection from abrasion and impact. Use them to eliminate sharp edges and create a finished look on metal fence and machine-guard posts. Drive them in place with a hammer for a secure fit.

Keep metal snap-in plugs of various sizes on hand to solve whatever problems arise. Made of steel, these plugs are our most durable plugs for panels. Their tapered prongs snap into holes to securely hold them in place.

Also known as freeze plugs, these are commonly used to permanently seal the shallow holes left in a component during the casting process.

Weld these caps and targets to the ends of posts to create stackable shelving and racking systems.

Assortments contain bits with multiple drive styles.

While screws with a square/Phillips combination drive can be turned with either a square or Phillips bit, these make the best contact so you can apply high torque without slipping and stripping the recess. They are also known as Quadrex bits.

An exterior stop collar prevents fasteners from being driven too deep. Use with soft materials such as drywall, wood, and fiberboard.

Designed to slide into T-slot tracks on machine tool tables, use these nuts to secure clamps and workpieces.

For mounting items to your machine table, these kits contain the full system of necessary components.

Install these sockets in tubing, angle iron, channel, and wood to hold friction-grip stem casters in place.

Use these inserts in hitch-ball connections.