A black-phosphate finish provides mild corrosion resistance.

The strongest key-locking inserts we offer, these inserts are made to stringent military specifications.

These inserts come with an installation tool. Drive the keys into the surrounding material for a more secure hold than thread-locking inserts.

Made of Nitronic 60 stainless steel, these inserts prevent the screw from binding or sticking without any coating or lubricant that could contaminate particle-free environments.

Inserts come with a through-hole tap and installation tool.

Made of 18-8 stainless steel, these inserts have better corrosion resistance than black-phosphate steel.

These assortments include various sizes of thread-locking inserts.

Adhesive on both the internal and external threads keeps these inserts in place and holds screws tight.

These 18-8 stainless steel tee nut inserts have better corrosion resistance than zinc-plated steel tee nut inserts.

Ridges on the barrel of these inserts make them less likely to split hardwood than inserts with prongs. They're often used in wood that has been cut across the growth rings.

These nuts have good chemical resistance and may be mildly magnetic.

About twice as strong as aluminum rivet nuts, these low-profile rivet nuts have a cadmium or tin-zinc plating for corrosion resistance.

Projections on the base concentrate the weld and provide room for heat to dissipate.

A smooth base provides more contact with the mating surface than weld nuts with projections.

Weld these nuts to flat and uneven uncoated steel surfaces for a strong permanent hold.

Square weld nuts have more weld points than hex weld nuts for a stronger hold. Use them on flat surfaces.

These nuts have three mounting holes to accept screws and rivets for use with thin materials.

Stronger than stainless steel, these nuts are comparable in strength to Grade 9 bolts.

These 18-8 stainless steel anchors have good chemical resistance.

Drive these tools with a hammer until the thicker portion of the tool makes contact with the anchor, causing it to expand.

These 316 stainless steel anchors have excellent resistance to chemicals and salt water.

Also known as caulk-in anchors, these stay secure when there's not much material to hold.

Often referred to as four-way expansion anchors, these expand in four directions to resist loosening from vibration.

A pivoting toggle bar creates a strong hold.

These studs are also known as hanger bolts—use them to hang, mount, and fasten parts to wood structures.

A hollow center allows these studs to be used as an axle, a vent, or a passageway for wiring.

Angled under the head for a flush finish in countersunk holes.

Install Keensert®-style inserts.

Screw an insert onto these tools and drive them a quarter to half-turn below the material's surface. They're compatible with helical inserts that have a prong.

Place the tip of these tools into an insert and strike a light blow to the tool’s head. Then turn the tools counterclockwise with pressure to extract the insert.

Black-oxide steel has a dull shine for areas where appearance is a concern.

Yellow zinc-plated steel is more corrosion resistant than nickel-plated steel.

Made of 303/304 stainless steel, these mounts resist corrosion from water and most chemicals.

Punch-out holes in the base let you bolt down these mounts to keep your equipment stationary.

An offset mounting hole allows for installation without moving your machine.

Nickel-plated steel has some corrosion resistance.

An economical choice for applications in corrosive environments that don't require high load capacities, these mounts have a plastic base.

Made entirely of 316 stainless steel, these mounts are our most resistant to corrosion from chemicals, solvents, and water.

Punch-out holes in the base let you bolt down these mounts to keep your equipment stationary.

Made of 303 stainless steel, these mounts resist corrosion from water and most chemicals.

A hex nut at the base of the stud allows for easy height adjustment.

Slip these inserts into tubular legs to quickly add threads for attaching leveling mounts. They’re often used in the legs of light equipment and furniture.

Spring action provides significant isolation of vibration and noise.

Well-suited to moist environments, these mounts have a stainless steel plate for excellent corrosion resistance.

Higher deflection ratings translate to greater vibration and shock isolation than our other vibration-damping leveling mounts.

A two-piece design simplifies installation and requires less clearance than one-piece mounts.

Higher deflection ratings translate to greater vibration and shock isolation.

Bolt these mounts down to keep your equipment stationary.

All of these bumpers are reinforced with a steel core for strength. Often used as feet, spacers, and vibration dampers, they absorb shock to prevent damage to equipment and surfaces. They're also good for starting and stopping motion on automated machines. Twist them into a threaded hole.

Install from the top of the T-slot track and secure with a quarter turn. Also known as quarter-turn T-slot nuts.

For mounting items to your machine table, these kits contain the full system of necessary components.

Good for occasional machining, economy kits contain lower-strength components than standard kits.

A plastic pad on the gripping surface of these clamps prevents workpiece marring, making them useful for holding polished surfaces and reducing the need for secondary finishing steps.