McMaster-Carr logo
    Enter e-mail addresses in the fields below
    Message
    Cancel
    Comments
    E-mail address (if you would like a response)
    5 Products

    Screw-On Caps

    Image of Product. Front orientation. Protective Caps. Screw-On Caps, Polyethylene.

    Polyethylene

    Thread onto male pipe and fittings for the most secure fit. These caps keep dust, paint, and coatings out of threads and pipe. They also protect from damage during manufacturing, shipping, and storage.
    Polyethylene—These tough caps are hard and wear resistant to hold up against scrapes and gouges.
    Thread
    Size
    Type
    For
    OD
    Inside
    Ht.
    Flexibility
    Max. Temp.,
    ° F
    Color
    Pkg.
    Qty.
    Pkg.
    Polyethylene
     
    For Straight-Thread Fittings
    1 7/8"-12
    UN
    1 7/8"1"Rigid150Red251277K132000000
     

    Screw-In Plugs for Pipe and Tubing

    Threaded for the most secure fit on female pipe and fittings. These plugs protect from damage during shipping and storage. They also keep dust, paint, and coatings from blocking holes and threads.
    For Straight-Thread Fittings
    Image of Product. Front orientation. Contains Annotated. Protective Plugs. Screw In, For Round Holes, For Pipe, For Round Shapes, For Straight-Thread Fittings, Aluminum.

    Aluminum

    Aluminum—Withstand the highest temperatures of all our pipe and tubing plugs. They’re more wear resistant than plastic but won’t hold up as well to chemicals.
    Thread
    Size
    Type
    For Tube
    OD
    Ht.
    Max. Temp.,
    ° F
    Pkg.
    Qty.
    Pkg.
    Aluminum
    1 7/8"-12
    UN
    1 1/2"5/8"65053438T27000000
     
    For 37° Flared Tube
    Image of Product. Front orientation. Contains Annotated. Protective Plugs. Screw In, For Round Holes, For Pipe, For Round Shapes, For 37° Flared Tube, Aluminum.

    Aluminum

    Aluminum—Withstand the highest temperatures of all our pipe and tubing plugs. They’re more wear resistant than plastic but won’t hold up as well to chemicals.
    Thread
    Size
    Type
    For Tube
    OD
    Ht.
    Max. Temp.,
    ° F
    Pkg.
    Qty.
    Pkg.
    Aluminum
    1 7/8"-12
    UN
    1 1/2"7/8"65053438T43000000
     

    Hollow Tapered Plugs

    Image of Product. Front orientation. Contains Annotated. Protective Plugs. Hollow Tapered Plugs.
    A hollow construction makes these plugs extra flexible, so they compress for easy installation and a snug fit. The tapered profile fits a range of hole diameters. If you flip the plug over, it can be used as a cap.
    Polyethylene—Convenient and economical. Instead of cleaning and reusing, just toss and grab a new plug.
    For ID
    For Thread
    Size
    Ht.
    Max. Temp.,
    ° F
    Color
    Flange
    Dia.
    Pkg.
    Qty.
    Pkg.
    Polyethylene
    1 3/4" to 1.88"1 7/8"-12
    3/4"150Red2"1004491K18000000
     

    Tapered Caps

    Image of Product. Front orientation. Protective Caps. Tapered Caps.
    Don't worry about having the exact size you need on hand. These caps are shaped to fit a range of ODs—just keep pushing on until they're snug. Because they make less contact with the parts they cover, they’re easier to remove than straight caps. In a pinch, you can flip tapered caps over and use them as plugs.
    Polyethylene—Convenient and economical, these flexible caps are one and done. Instead of cleaning and reusing, just toss and grab a new cap.
    For OD
    For Pipe
    Size
    For Thread
    Size
    Inside
    Ht.
    Flexibility
    Max. Temp.,
    ° F
    Color
    Pkg.
    Qty.
    Pkg.
    Polyethylene
    1.718" to 1.888"1 1/2
    1 7/8"-12
    1"Flexible150Red504491K75000000
     
    back to top