Assortments include various sizes of inserts, a soldering iron, a ceramic insulation tube, and installation tips.

With the male threaded end on these inserts, mount components directly to plastic parts.

These 18-8 stainless steel inserts have better corrosion resistance than brass inserts and may be mildly magnetic.

Made from brass, these inserts are nonmagnetic, corrosion resistant, and electrically conductive.

These aluminum inserts are 70% lighter than brass inserts, electrically conductive, and nonmagnetic. They have good corrosion resistance, which is comparable to brass but not as good as stainless steel.

70% lighter than stainless steel, these aluminum inserts are mildly corrosion resistant and nonmagnetic.

Use these inserts to install fine-thread screws in existing holes.

A black-phosphate finish provides mild corrosion resistance.

The strongest key-locking inserts we offer, these inserts are made to stringent military specifications.

These inserts come with an installation tool. Drive the keys into the surrounding material for a more secure hold than thread-locking inserts.

Made of 18-8 stainless steel, these inserts have better corrosion resistance than black-phosphate steel.

These assortments include various sizes of thread-locking inserts.

Adhesive on both the internal and external threads keeps these inserts in place and holds screws tight.

Made of Nitronic 60 stainless steel, these inserts prevent the screw from binding or sticking without any coating or lubricant that could contaminate particle-free environments.

Eliminating the need for primer, these inserts are coated to resist corrosion when installed in different materials.

Made of nickel alloy, these inserts are more resistant to acids and salt water than stainless steel inserts.

A dry film keeps the screw from sticking or binding in these inserts during installation.

Without a prong to break off and retrieve, these inserts are often used where debris could cause damage.

A distorted thread grips the screw to resist loosening.

Assortments include various sizes of helical inserts and a tap, a drill bit, and an installation tool for each thread size.

These kits have short-, normal-, and long-reach inserts, an installation tool, and a tap.

Large threads cut into softwood such as particleboard for a strong hold.

Made from brass, these inserts are nonmagnetic, mildly corrosion resistant, and electrically conductive.

These 18-8 stainless steel inserts have excellent resistance to chemicals and may be mildly magnetic.

These 18-8 stainless steel tee nut inserts have better corrosion resistance than zinc-plated steel tee nut inserts.

Ridges on the barrel of these inserts make them less likely to split hardwood than inserts with prongs. They're often used in wood that has been cut across the growth rings.

Six prongs around the barrel of these inserts provide a strong hold and prevent them from loosening and twisting.

Use where vibration is a concern—these tee nut inserts have distorted threads that lock screws in place.

A closed end seals out elements and protects the threads on these inserts from debris.

Knurls hold these inserts in hardwoods such as oak, maple, and walnut to prevent twisting.

A wide flange distributes the load over a large area. Hammer these inserts into a drilled hole.

Press these metric nuts into a drilled or punched hole with an arbor press or similar pressure tool.

These metric nuts have good chemical resistance and may be mildly magnetic.

These press-fit nuts have a nylon insert that grips threads to resist loosening.

These press-fit nuts have a zinc plating for corrosion resistance in wet environments.

Also known as broach style captive nuts, these metric nuts have good chemical resistance and may be mildly magnetic.

These tools include everything you need to install press-fit nuts by hand.

The most corrosion resistant twist-resistant rivet nuts we offer, these stand up to chemicals.

A hex-shaped body provides the highest twist resistance of any rivet nut.

About twice as strong as aluminum rivet nuts, these low-profile rivet nuts have a cadmium or tin-zinc plating for corrosion resistance.

The most corrosion resistant low-profile rivet nuts we offer, these stand up to chemicals.

These aluminum rivet nuts are one-third the weight of steel rivet nuts and have mild corrosion resistance.

Once installed these rivet nuts have a large back flange that distributes the load across a broad area for a strong hold in plastic and composites.

The coated flange seals out moisture and prevents corrosion.

A PVC foam seal under the flange keeps liquids and gasses from leaking between the nut and the surrounding material.

A nonconductive rubber coating insulates the nut from electricity, seals out moisture, and damps vibration.

A smooth base on these metric nuts provides more contact with the mating surface than weld nuts with projections

Projections on the base concentrate the weld and provide room for heat to dissipate.

Use these metric nuts in channels and tight spaces where round-base weld nuts won't fit.

A smooth base provides more contact with the mating surface than weld nuts with projections.

Weld these nuts to stainless steel surfaces.

Square weld nuts have more weld points than hex weld nuts for a stronger hold. Use them on flat surfaces.

Weld these metric nuts to flat and uneven uncoated steel surfaces for a strong permanent hold.

You can weld these metric nuts to flat and uneven uncoated stainless steel surfaces for a strong permanent hold.

Threads float inside the retainer of these metric nuts so you can install a bolt at a slight angle to align with off center parts.

These screw-mount nuts are often used to attach glides and levels to wood.

These adhesive-mount nuts have a zinc plating for corrosion resistance in wet environments.

Stronger than stainless steel, these nuts are comparable in strength to Grade 9 bolts.

About half the strength of medium-strength steel coupling nuts, these metric nuts are for light duty fastening applications.

A zinc-plated finish gives these steel inserts mild corrosion resistance.

Protect bolts from sideways (shear) pressure.

More corrosion resistant than 18-8 stainless steel anchors, these 316 stainless steel anchors have excellent resistance to chemicals and salt water.

Drive these tools with a hammer until the thicker portion of the tool makes contact with the anchor, causing it to expand.

These 316 stainless steel anchors have excellent resistance to chemicals and salt water.

Often referred to as four-way expansion anchors, these expand in four directions to resist loosening from vibration.

Drive these tools with a hammer to expand anchors.

An adjustable stop allows you to set anchors at consistent depths. Use with a hammer.

Also known as mungo anchors, these have large fins that prevent rotation.

Also known as lag shields, these anchors are designed for use with large-diameter wood screws.

A pivoting toggle bar creates a strong hold.

These anchors fit a range of sheet metal and wood screw sizes since they form their own threads when installed.

Create strong joints in wood and wood composite.

Use these rivet nuts for light duty fastening in low-clearance applications. Assortments include rivet nuts, mandrels, and an installation tool.