The tapered shape makes it easier to guide these inserts into a hole during installation. Use a drill bit to create a tapered hole.

Install these inserts into plastic parts to create a secure base for fasteners.

Made from brass, these inserts are electrically conductive, nonmagnetic, and have good corrosion resistance.

These aluminum inserts are 70% lighter than brass inserts, electrically conductive, and nonmagnetic. They have good corrosion resistance, which is comparable to brass but not as good as stainless steel.

These 18-8 stainless steel inserts have better corrosion resistance than brass inserts and may be mildly magnetic.

The flange keeps these inserts from pulling through a hole. Press them in from the underside of material, and install a screw from the top of material.

These 18-8 stainless steel inserts have better corrosion resistance than aluminum inserts and may be mildly magnetic.

The barbed sides keep these securely in place even before a screw is installed.

Made of 18-8 stainless steel, these inserts have good corrosion resistance.

These inserts are made to stringent military specifications.

These inserts come with an installation tool. Drive the keys into the surrounding material for a more secure hold than thread-locking inserts.

A black-phosphate finish provides mild corrosion resistance.

These inserts are the most corrosion-resistant thread-locking inserts we offer.

A closed-end tap, drill bit, and installation bit are included with these inserts.

A dry film keeps the screw from sticking or binding in these inserts during installation.

Made of nickel alloy, these inserts are more resistant to acids and salt water than stainless steel inserts.

A distorted thread grips the screw to resist loosening.

Made of Nitronic 60 stainless steel, these inserts prevent the screw from binding or sticking without any coating or lubricant that could contaminate particle-free environments.

A dry film keeps the screw from sticking or binding in these inserts during installation.

Inserts come with a through-hole tap and installation tool.

The flange keeps these inserts from being pulled through a hole and provides a load bearing surface.

Assortments include various sizes of tapping inserts for softwood.

These 18-8 stainless steel inserts have excellent resistance to chemicals and may be mildly magnetic.

Steel inserts have high strength for durability.

Ridges on the barrel of these inserts make them less likely to split hardwood than inserts with prongs. They're often used in wood that has been cut across the growth rings.

Six prongs around the barrel of these inserts provide a strong hold and prevent them from loosening and twisting.

Also known as clinch style captive nuts, press these nuts into a drilled or punched hole with an arbor press or similar pressure tool.

A flat hex head sits flush against the material surface for use in low-clearance applications.

Stainless steel press-fit nuts have excellent corrosion resistance in most environments.

Also known as broach style captive nuts, these nuts have good chemical resistance and may be mildly magnetic.

About twice as strong as aluminum rivet nuts, these steel rivet nuts are zinc plated for mild corrosion resistance.

These aluminum rivet nuts are one-third the weight of steel rivet nuts and have mild corrosion resistance.

Wedges under the flange lock the nut in place in soft materials such as brass and aluminum.

These kits include one size of low-profile rivet nuts.

These low-profile rivet nuts are one-third the weight of steel and have mild corrosion resistance.

These aluminum rivet nuts are one-third the weight of steel rivet nuts and have mild corrosion resistance.

The thread area is enclosed, which prevents leakage past the threads from either side of your application.

A nonconductive rubber coating insulates the nut from electricity, seals out moisture, and damps vibration.

A smooth base provides more contact with the mating surface than weld nuts with projections.

Projections on the base concentrate the weld and provide room for heat to dissipate.

Weld these nuts to stainless steel surfaces.

A smooth base provides more contact with the mating surface than weld nuts with projections.

Weld these nuts to uncoated steel surfaces.

Weld these nuts to flat and uneven uncoated steel surfaces for a strong permanent hold.

These nuts have three mounting holes to accept screws and rivets for use with thin materials.

These adhesive-mount nuts have a zinc plating for corrosion resistance in wet environments.

Stronger than stainless steel, these nuts are comparable in strength to Grade 9 bolts.

About half the strength of medium-strength steel coupling nuts, these metric nuts are for light duty fastening applications.