Assortments include various sizes of inserts, a soldering iron, a ceramic insulation tube, and installation tips.

With the male threaded end on these inserts, mount components directly to plastic parts.

The flange keeps these inserts from pulling through a hole. Press them in from the underside of material, and install a screw from the top of material.

70% lighter than stainless steel, these aluminum inserts are mildly corrosion resistant and nonmagnetic.

Forming the strongest hold of any of our threaded inserts, these inserts have a distorted internal thread to lock screws into place and keys that drive into surrounding material to prevent slipping and rotating.

Made of Nitronic 60 stainless steel, these inserts prevent the screw from binding or sticking without any coating or lubricant that could contaminate particle-free environments.

A distorted thread grips the screw to resist loosening.

Without a prong to break off and retrieve, these inserts are often used where debris could cause damage.

Inserts come with a through-hole tap and installation tool.

These metric nuts have good chemical resistance and may be mildly magnetic.

Also known as broach style captive nuts, these metric nuts have good chemical resistance and may be mildly magnetic.

These tools include everything you need to install press-fit nuts by hand.

Stronger than stainless steel, these nuts are comparable in strength to Grade 9 bolts.

These steel studs are zinc plated to resist corrosion in wet environments.

Screw an insert onto these tools and drive them a quarter to half-turn below the material's surface. They're compatible with helical inserts that have a prong.

Place the tip of these tools into an insert and strike a light blow to the tool’s head. Then turn the tools counterclockwise with pressure to extract the insert.

Thread these tools into an insert and turn counterclockwise to extract.