Assortments include various sizes of inserts, a soldering iron, a ceramic insulation tube, and installation tips.

With the male threaded end on these inserts, mount components directly to plastic parts.

These 18-8 stainless steel inserts have better corrosion resistance than brass inserts and may be mildly magnetic.

Made from brass, these inserts are nonmagnetic, corrosion resistant, and electrically conductive.

These aluminum inserts are 70% lighter than brass inserts, electrically conductive, and nonmagnetic. They have good corrosion resistance, which is comparable to brass but not as good as stainless steel.

70% lighter than stainless steel, these aluminum inserts are mildly corrosion resistant and nonmagnetic.

Use these inserts to install fine-thread screws in existing holes.

A black-phosphate finish provides mild corrosion resistance.

Forming the strongest hold of any of our threaded inserts, these inserts have a distorted internal thread to lock screws into place and keys that drive into surrounding material to prevent slipping and rotating.

Made of Nitronic 60 stainless steel, these inserts prevent the screw from binding or sticking without any coating or lubricant that could contaminate particle-free environments.

Eliminating the need for primer, these inserts are coated to resist corrosion when installed in different materials.

A distorted thread grips the screw to resist loosening.

Without a prong to break off and retrieve, these inserts are often used where debris could cause damage.

Inserts come with a through-hole tap and installation tool.

Kits include helical inserts, a tap, and an installation tool.

Made of 18-8 stainless steel, these inserts have better corrosion resistance than black-phosphate steel.

These assortments include various sizes of thread-locking inserts.

Large threads cut into softwood such as particleboard for a strong hold.

These 18-8 stainless steel inserts have excellent resistance to chemicals and may be mildly magnetic.

These 18-8 stainless steel tee nut inserts have better corrosion resistance than zinc-plated steel tee nut inserts.

A wide flange distributes the load over a large area. Hammer these inserts into a drilled hole.

These metric nuts have good chemical resistance and may be mildly magnetic.

These press-fit nuts have a nylon insert that grips threads to resist loosening.

Also known as broach style captive nuts, these metric nuts have good chemical resistance and may be mildly magnetic.

The most corrosion resistant twist-resistant rivet nuts we offer, these stand up to chemicals.

A hex-shaped body provides the highest twist resistance of any rivet nut.

The most corrosion resistant low-profile rivet nuts we offer, these stand up to chemicals.

Once installed these rivet nuts have a large back flange that distributes the load across a broad area for a strong hold in plastic and composites.

The thread area is enclosed, which prevents leakage past the threads from either side of your application.

Threads float inside the nut so you can install a screw at a slight angle to align with off-center parts. They’re also known as Riv-Float nuts.

Projections on the base concentrate the weld and provide room for heat to dissipate.

Use these metric nuts in channels and tight spaces where round-base weld nuts won't fit.

Weld these nuts to uncoated steel surfaces.

You can weld these metric nuts to flat and uneven uncoated stainless steel surfaces for a strong permanent hold.

Threads float inside the retainer of these metric nuts so you can install a bolt at a slight angle to align with off center parts.

These adhesive-mount nuts have a zinc plating for corrosion resistance in wet environments.

Stronger than stainless steel, these nuts are comparable in strength to Grade 9 bolts.

Stainless steel snap-in nuts have excellent corrosion resistance in most environments.

These steel studs are zinc plated to resist corrosion in wet environments.

These metric 316 stainless steel studs have excellent resistance to chemicals and salt water. Also known as hanger bolts, use them to hang, mount, and fasten parts to wood structures.

These steel studs are zinc plated to resist corrosion in wet environments.

Made of yellow zinc-plated steel, these metric leveling mounts are more corrosion resistant than nickel-plated steel leveling mounts.

Made of 303 stainless steel, these metric mounts resist corrosion from water and most chemicals.

Punch-out holes in the base let you bolt down these metric mounts to keep your equipment stationary.

Made of 303 stainless steel, these metric mounts resist corrosion from water and most chemicals.

Made of 303 stainless steel, these metric mounts resist corrosion from water and most chemicals.

Install these mounts on machines without feet.

An interlocking steel frame in these mounts prevents collapse, even if the rubber fails.