For Use On For Use On |
|---|
|
For Use With For Use With |
|---|
|
Specifications Met Specifications Met |
|---|
|
Maximum Amount of Water Treated Maximum Amountof Water Treated |
|---|
Measures Measures |
|---|
Welding Process Welding Process |
|---|
|
|
Material Material |
|---|
|
Leak-Detecting Dye for Water Systems
Easy-to-see colors enable you to visually inspect for leaks without ultraviolet light.
One gallon of water occupies 0.1337 cubic ft. Calculate the number of gallons a tank holds by dividing the tank volume by 0.1337.
Fluorescent dye can be enhanced with a UV flashlight.
Tablets are easy to use for small volumes of water, such as toilets and septic systems. They dissolve in five minutes. Tablets that come in a packet include instructions for detecting a toilet leak.
Liquid is a good choice for larger volumes of water, such as sewers. It disperses faster than tablets and powder.
Powder is the best choice for the largest volumes of water, such as ponds, piping systems in power plants, and cooling towers.
Container | ||||||||
|---|---|---|---|---|---|---|---|---|
| Color | Max. Amount of Water Treated, gal. | No. of Tablets | Size | Type | Specifications Met | Includes | Each | |
Tablets | ||||||||
| Blue | 4 | 2 | __ | Packet | NSF/ANSI Standard 60 for Drinking Water Chemicals | Instructions | 0000000 | 00000 |
| Blue | 4,000 | 200 | __ | Jar | NSF/ANSI Standard 60 for Drinking Water Chemicals | __ | 0000000 | 00000 |
| Fluorescent Orange | 7,000 | 200 | __ | Jar | NSF/ANSI Standard 60 for Drinking Water Chemicals | __ | 0000000 | 00000 |
| Fluorescent Red | 12,000 | 200 | __ | Jar | NSF/ANSI Standard 60 for Drinking Water Chemicals | __ | 0000000 | 00000 |
| Fluorescent Yellow/Green | 12,000 | 200 | __ | Jar | NSF/ANSI Standard 60 for Drinking Water Chemicals | __ | 0000000 | 00000 |
Liquid | ||||||||
| Blue | 12,500 | __ | 1 pt. | Bottle | NSF/ANSI Standard 60 for Drinking Water Chemicals | __ | 0000000 | 00000 |
| Blue | 100,000 | __ | 1 gal. | Jug | NSF/ANSI Standard 60 for Drinking Water Chemicals | __ | 0000000 | 00000 |
| Fluorescent Orange | 4,000 | __ | 1 pt. | Bottle | NSF/ANSI Standard 60 for Drinking Water Chemicals | __ | 0000000 | 00000 |
| Fluorescent Orange | 32,000 | __ | 1 gal. | Jug | NSF/ANSI Standard 60 for Drinking Water Chemicals | __ | 0000000 | 00000 |
| Fluorescent Red | 3,125 | __ | 1 pt. | Bottle | NSF/ANSI Standard 60 for Drinking Water Chemicals | __ | 0000000 | 00000 |
| Fluorescent Red | 25,000 | __ | 1 gal. | Jug | NSF/ANSI Standard 60 for Drinking Water Chemicals | __ | 0000000 | 00000 |
| Fluorescent Yellow/Green | 12,500 | __ | 1 pt. | Bottle | NSF/ANSI Standard 60 for Drinking Water Chemicals | __ | 0000000 | 00000 |
| Fluorescent Yellow/Green | 100,000 | __ | 1 gal. | Jug | NSF/ANSI Standard 60 for Drinking Water Chemicals | __ | 0000000 | 00000 |
Powder | ||||||||
| Blue | 120,000 | __ | 1 lbs. | Jar | NSF/ANSI Standard 60 for Drinking Water Chemicals | __ | 0000000 | 000000 |
| Blue | 1,200,000 | __ | 10 lbs. | Pail | NSF/ANSI Standard 60 for Drinking Water Chemicals | __ | 0000000 | 00000000 |
| Blue | 3,000,000 | __ | 25 lbs. | Pail | NSF/ANSI Standard 60 for Drinking Water Chemicals | __ | 0000000 | 00000000 |
| Fluorescent Orange | 60,400 | __ | 1 lbs. | Jar | NSF/ANSI Standard 60 for Drinking Water Chemicals | __ | 0000000 | 000000 |
| Fluorescent Orange | 604,000 | __ | 10 lbs. | Pail | NSF/ANSI Standard 60 for Drinking Water Chemicals | __ | 0000000 | 00000000 |
| Fluorescent Orange | 1,510,000 | __ | 25 lbs. | Pail | NSF/ANSI Standard 60 for Drinking Water Chemicals | __ | 0000000 | 00000000 |
| Fluorescent Red | 60,000 | __ | 1 lbs. | Jar | NSF/ANSI Standard 60 for Drinking Water Chemicals | __ | 0000000 | 000000 |
| Fluorescent Red | 600,000 | __ | 10 lbs. | Pail | NSF/ANSI Standard 60 for Drinking Water Chemicals | __ | 0000000 | 00000000 |
| Fluorescent Red | 1,500,000 | __ | 25 lbs. | Pail | NSF/ANSI Standard 60 for Drinking Water Chemicals | __ | 0000000 | 00000000 |
| Fluorescent Yellow/Green | 120,000 | __ | 1 lbs. | Jar | NSF/ANSI Standard 60 for Drinking Water Chemicals | __ | 0000000 | 000000 |
| Fluorescent Yellow/Green | 1,200,000 | __ | 10 lbs. | Pail | NSF/ANSI Standard 60 for Drinking Water Chemicals | __ | 0000000 | 00000000 |
| Fluorescent Yellow/Green | 3,000,000 | __ | 25 lbs. | Pail | NSF/ANSI Standard 60 for Drinking Water Chemicals | __ | 0000000 | 00000000 |
| UV Mini Flashlight for Fluorescent Dye | 000000 | Each | 000000 |
Leak-Detecting Dye for Hydraulic Systems
Easy-to-see colors enable you to visually inspect for leaks without ultraviolet light.
Use 1 oz. of dye for every 50 gallons of oil, solvent, wax, or other industrial fluid you're inspecting.
Fluorescent red dye can be enhanced with a UV flashlight.
UV Light Flaw-Detection Kits
More sensitive than natural light kits, this kit uses UV light with colored dye to detect cracks, seams, and pores on machined surfaces.
Light | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For Use On | Includes | Bulb Type | Bulb Wattage | Voltage | Electrical Connection Type | Plug Type | Cord Lg., ft. | Specifications Met | Each | |
| Carbide, Cast Iron, Ceramic, Stainless Steel, Steel | UV Light, One 16-oz Can of Fluorescent Green Dye, One 16-oz. Can of Developer, Two 16-oz. Aerosol Cans of Cleaner | Ultraviolet | 5W | 120V AC | Plug In | Three Prong | 9 | ASTM E1417, MIL-STD 2132, MIL-STD 271, SAE-AMS-2644, Sulfur-Chlorine-Halogen Requirements | 0000000 | 000000000 |
Natural Light Flaw-Detection Kits
Use colored dye to reveal cracks and surface flaws in most nonporous material. Flaws become visible under natural light and appear as a bright red color. Commonly used for weld inspecting.
| For Use On | Includes | Specifications Met | Each | |
| Carbide, Cast Iron, Ceramic, Stainless Steel, Steel | Four 16-oz. Aerosol Cans of Cleaner, Two 16-oz. Aerosol Cans of Developer, Two 16-oz. Aerosol Cans of Red Dye | ASTM E1417, MIL-STD 2132, MIL-STD 271, SAE-AMS-2644, Sulfur-Chlorine-Halogen Requirements | 000000 | 0000000 |
Plug-In Magnetic Particle Flaw-Detection Kits
This kit comes with a yoke that creates a magnetic field on the part you’re inspecting—apply the powder on ferrous metal and the defects appear.
| For Use On | Includes | Plug Type | Voltage | Specifications Met | Each | |
| Cast Iron, Stainless Steel, Steel | One 1-lb. Bottle of Gray Powder, One 1-lb. Bottle of Red Powder | Three Prong | 120V AC | ASTM E1444, MIL-STD 2132 | 000000 | 0000000 |
Corner Weld Inspection Gauges
Also known as a fillet gauge, this gauge measures concave and convex corner weld dimensions.
| Radius Measured | Metric Radius Measured, mm | Measures | Material | Includes | Each | |
MIG, TIG, Stick, Oxyacetylene Welding Process | ||||||
|---|---|---|---|---|---|---|
| 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8", 3/4", 7/8", 1" | 3, 5, 6, 8, 10, 11, 13, 16, 19, 22, 25 | Concave Corners, Convex Corners | Steel | Vinyl Carrying Case | 0000000 | 000000 |
Weld Alignment Inspection Gauges
Measure internal misalignment of pipe ID, pipe wall thickness after tack welding, and go/no-go fit-up gap.
Internal Misalignment of Pipe ID | Pipe Wall Thick. After Tack Welding | ||||||
|---|---|---|---|---|---|---|---|
| Max. Size Measured | Graduation Marks | Max. Thick. Measured | Graduation Marks | Go/No-Go Fit-Up Gap Size Measured Range | Material | Each | |
MIG, TIG, Stick, Oxyacetylene Welding Process | |||||||
| 1/16", 30 mm | 1/32", 1 mm | 1 3/4", 45mm | 1/16", 1 mm | 1/16"-3/32" | Stainless Steel | 0000000 | 0000000 |
Multicheck Weld Inspection Gauges
Check bevel angles, excess weld metal (capping size), length of a corner-weld leg, throat length, and depth of undercut.
Excess Weld Metal (Capping Size) | Corner-Weld Leg Lg. | Throat Lg. | Dp. of Undercut | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Bevel Angle Measured | Max. Size Measured | Graduation Marks | Max. Lg. Measured | Graduation Marks | Max. Lg. Measured | Graduation Marks | Max. Size Measured | Graduation Marks | Material | Includes | Each | |
MIG, TIG, Stick, Oxyacetylene Welding Process | ||||||||||||
| 0°-60° | 1", 25 mm | 1/16", 1 mm | 1", 25mm | 1/16", 1 mm | 3/4", 20mm | 1/16", 1 mm | 3/16", 5 mm | 1/16", 1 mm | Stainless Steel | Vinyl Carrying Case | 0000000 | 000000 |
Inspection and Measuring Fixturing
Use these components in coordinate measuring machine (CMM) applications to raise a workpiece and reliably position it on a fixture plate with 1/4"-20 holes. They are not for use in machining applications.
| Number of Pieces | Includes | Thread Size | Container Type | Each | |
| 42 | 3 Hold-Down Clamps—1 9/16" Reach × 3" O'all Ht. 3 Hold-Down Clamps—2 5/16" Reach × 3" O'all Ht. 3 Standoffs—1/2" Dia. × 3/4" Ht. 3 Standoffs—1/2" Dia. × 2" Ht. 3 Standoffs—3/4" Dia. × 3/4" Ht. 3 Standoffs—3/4" Dia. × 2" Ht. 6 Standoffs—1/2" Dia. × 1" Ht. 6 Standoffs—3/4" Dia. × 1" Ht. 3 Pin Supports—1/2" Dia. × 1/2" Ht. 3 Pin Supports—3/4" Dia. × 1/2" Ht. 3 Cone Supports 1 Adjustable-Height Sleeve for Standoffs 2 Positioning Plates | 1/4"-20 | Wood Stand | 0000000 | 0000000 |
| 62 | 3 Hold-Down Clamps—1 9/16" Reach × 3" O'all Ht. 3 Hold-Down Clamps—2 5/16" Reach × 3" O'all Ht. 2 Toggle Clamps with Mounting Plate 3 Standoffs—1/2" Dia. × 3/4" Ht. 3 Standoffs—1/2" Dia. × 2" Ht. 3 Standoffs—3/4" Dia. × 3/4" Ht. 3 Standoffs—3/4" Dia. × 2" Ht. 3 Standoffs—1" Dia. × 3/4" Ht. 3 Standoffs—1" Dia. × 2" Ht. 6 Standoffs—1/2" Dia. × 1" Ht. 6 Standoffs—3/4" Dia. × 1" Ht. 6 Standoffs—1" Dia. × 1" Ht. 1 Precision Adjustable-Height Standoff—1/2" Dia. 3 Pin Supports—1/2" Dia. × 1/2" Ht. 3 Pin Supports—3/4" Dia. × 1/2" Ht. 6 Cone Supports 2 Any-Angle Cone Supports 1 Adjustable-Height Sleeve for Standoffs 2 Positioning Plates | 1/4"-20 | Wood Stand | 0000000 | 00000000 |