Body Material Body Material |
|---|
|
For Use With For Use With |
|---|
Ball Material Ball Material |
|---|
|
Maximum Pressure Maximum Pressure |
|---|
|
Vacuum Rating Vacuum Rating |
|---|
|
Seat Material Seat Material |
|---|
|
Overall Height Overall Height |
|---|
Overall Length Overall Length |
|---|
End-to-End Length End-to-End Length |
|---|
About On/Off Valves
More
Panel-Mount Threaded On/Off Valves
- Valve Type: Ball
- For Use With: Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon
- Seal Material: Fluoroelastomer Rubber
For installation in instrument panels, these valves have threads and a hex nut below the handle.
Full-port valves do not restrict flow.
Standard-port valves slightly restrict flow.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
| Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Vacuum Rating, in. of Hg | Port Type | End-to-End Lg. | Panel Cutout Dia. | Each | |
Brass Body | |||||||||
|---|---|---|---|---|---|---|---|---|---|
NPT Female × NPT Female | |||||||||
| 1/8 | 1.6 | 1500 psi @ 70° F | -30° to 300° | 29 | Full | 1 13/16" | 9/16" | 0000000 | 000000 |
| 1/4 | 1.6 | 1500 psi @ 70° F | -30° to 300° | 29 | Full | 1 13/16" | 9/16" | 0000000 | 00000 |
| 3/8 | 2.7 | 1000 psi @ 70° F | -30° to 300° | 29 | Standard | 2 1/4" | 9/16" | 0000000 | 00000 |
| 1/2 | 2.7 | 1000 psi @ 70° F | -30° to 300° | 29 | Standard | 2 3/8" | 9/16" | 0000000 | 00000 |
NPT Male × NPT Male | |||||||||
| 1/8 | 1.4 | 1500 psi @ 70° F | -30° to 300° | 29 | Full | 1 15/16" | 9/16" | 0000000 | 00000 |
| 1/4 | 1.6 | 1500 psi @ 70° F | -30° to 300° | 29 | Full | 2" | 9/16" | 0000000 | 00000 |
| 3/8 | 2.7 | 1000 psi @ 70° F | -30° to 300° | 29 | Standard | 2 1/8" | 9/16" | 0000000 | 00000 |
| 1/2 | 2.7 | 1000 psi @ 70° F | -30° to 300° | 29 | Standard | 2 5/8" | 9/16" | 0000000 | 00000 |
| Pipe Size | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Vacuum Rating, in. of Hg | Port Type | Port-to-Port Lg. | Panel Cutout Dia. | Each | |
Brass Body | |||||||||
|---|---|---|---|---|---|---|---|---|---|
NPT Female × NPT Female | |||||||||
| 1/8 | 1.4 | 1500 psi @ 70° F | -30° to 300° | 29 | Full | 15/16" | 9/16" | 0000000 | 000000 |
| 1/4 | 1.6 | 1500 psi @ 70° F | -30° to 300° | 29 | Full | 15/16" | 9/16" | 0000000 | 00000 |
| 3/8 | 2.7 | 600 psi @ 70° F | -30° to 300° | 29 | Standard | 1 1/8" | 9/16" | 0000000 | 00000 |
| 1/2 | 2.7 | 600 psi @ 70° F | -30° to 300° | 29 | Standard | 1 3/16" | 9/16" | 0000000 | 00000 |
NPT Male × NPT Male | |||||||||
| 1/8 | 1.4 | 1500 psi @ 70° F | -30° to 300° | 29 | Full | 1" | 9/16" | 0000000 | 00000 |
| 1/4 | 1.6 | 1500 psi @ 70° F | -30° to 300° | 29 | Full | 1" | 9/16" | 0000000 | 00000 |
| 3/8 | 2.7 | 600 psi @ 70° F | -30° to 300° | 29 | Standard | 1 1/16" | 9/16" | 0000000 | 00000 |
| 1/2 | 2.7 | 600 psi @ 70° F | -30° to 300° | 29 | Standard | 1 5/16" | 9/16" | 0000000 | 00000 |
High-Pressure Threaded On/Off Valves
These valves are rated for at least three times the pressure of standard threaded valves.
316 stainless steel valves are more corrosion resistant than steel valves.
Standard-port valves slightly restrict flow.
For technical drawings and 3-D models, click on a part number.
- Valve Type: Ball
- For Use With: Argon, Helium, Krypton, Neon, Oil, Steam, Water, Xenon
- Seal Material: PTFE Plastic
| Pipe Size | Max. Pressure | Max. Steam Pressure | Temperature Range, °F | Port Type | End-to-End Lg. | Each | |
316 Stainless Steel Body | |||||||
|---|---|---|---|---|---|---|---|
NPT Female × NPT Female | |||||||
| 1/4 | 10,000 psi @ 265° F | 10,000 psi @ 265° F | -40° to 445° | Standard | 3 1/2" | 0000000 | 0000000 |
| 3/8 | 10,000 psi @ 265° F | 10,000 psi @ 265° F | -40° to 445° | Standard | 3 5/8" | 0000000 | 000000 |
| 1/2 | 10,000 psi @ 265° F | 10,000 psi @ 265° F | -40° to 445° | Standard | 3 3/4" | 0000000 | 000000 |
| 3/4 | 10,000 psi @ 265° F | 10,000 psi @ 265° F | -40° to 445° | Standard | 4 5/16" | 0000000 | 000000 |
| 1 | 10,000 psi @ 265° F | 10,000 psi @ 265° F | -40° to 445° | Standard | 4 7/8" | 0000000 | 000000 |
Panel-Mount On/Off Valves with Yor-Lok Fittings
- Valve Type: Ball
- For Use With:
PFA Plastic Seal: Water, Oil, Air, Argon, Helium, Krypton, Neon, Xenon, Steam
All Other Valves: Water, Oil, Air, Argon, Helium, Krypton, Neon, Xenon
Threads and a hex nut below the handle allow you to install these valves in instrument panels. For extra gripping power and a strong seal, they have Yor-Lok fittings with two sleeves that bite into tubing as you tighten the nut. All are compatible with Swagelok®, Let-Lok, and Parker A-Lok fittings. Valves are standard port, so they slightly restrict flow.
316 stainless steel valves are more corrosion resistant than brass valves.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
| For Tube OD | Flow Coefficient (Cv) | Max. Pressure | Max. Steam Pressure | Temperature Range, °F | Vacuum Rating, in. of Hg | End-to-End Lg. | Panel Cutout Dia. | Each | |
Brass Body—Fluoroelastomer Rubber Seal | |||||||||
|---|---|---|---|---|---|---|---|---|---|
Yor Lok × Yor Lok | |||||||||
| 1/8" | 0.22 | 1500 psi @ 70° F | __ | -30° to 300° | 29 | 2 3/8" | 5/8" | 0000000 | 000000 |
| 1/4" | 0.88 | 1500 psi @ 70° F | __ | -30° to 300° | 29 | 2 9/16" | 5/8" | 0000000 | 00000 |
| 3/8" | 1.57 | 1000 psi @ 70° F | __ | -30° to 300° | 29 | 2 5/8" | 5/8" | 0000000 | 00000 |
| 1/2" | 2.74 | 1000 psi @ 70° F | __ | -30° to 300° | 29 | 3 3/16" | 5/8" | 0000000 | 000000 |
Brass Body—PTFE Plastic Seal | |||||||||
Yor Lok × Yor Lok | |||||||||
| 1/8" | 0.2 | 3000 psi @ 70° F | __ | -30° to 400° | 29 | 3 1/8" | 3/4" | 0000000 | 00000 |
| 1/4" | 1.5 | 3000 psi @ 70° F | __ | -30° to 400° | 29 | 3 5/16" | 3/4" | 0000000 | 00000 |
| 3/8" | 1.5 | 3000 psi @ 70° F | __ | -30° to 400° | 29 | 3 7/16" | 3/4" | 0000000 | 00000 |
| 1/2" | 12 | 3000 psi @ 70° F | __ | -30° to 400° | 29 | 4 1/16" | 13/16" | 0000000 | 000000 |
316 Stainless Steel Body—PFA Plastic Seal | |||||||||
Yor Lok × Yor Lok | |||||||||
| 1/16" | 0.03 | 1000 psi @ 300° F | 1,000 psi @ 300° F | -65° to 300° | Not Rated | 1 11/16" | 19/32" | 0000000 | 000000 |
| 1/8" | 0.2 | 1000 psi @ 300° F | 1,000 psi @ 300° F | -65° to 300° | Not Rated | 2" | 19/32" | 0000000 | 000000 |
| 1/4" | 0.44 | 1000 psi @ 300° F | 1,000 psi @ 300° F | -65° to 300° | Not Rated | 2 1/4" | 19/32" | 0000000 | 00000 |
| 3/8" | 1.02 | 1000 psi @ 300° F | 1,000 psi @ 300° F | -65° to 300° | Not Rated | 2 5/8" | 25/32" | 0000000 | 000000 |
| 1/2" | 10.7 | 1000 psi @ 300° F | 1,000 psi @ 300° F | -65° to 300° | Not Rated | 3 7/8" | 1 1/2" | 0000000 | 000000 |
316 Stainless Steel Body—PTFE Plastic Seal | |||||||||
Yor Lok × Yor Lok | |||||||||
| 1/16" | 0.1 | 6000 psi @ 125° F | __ | -30° to 280° | 29 | 2 3/4" | 3/4" | 00000000 | 000000 |
| 1/8" | 0.2 | 6000 psi @ 125° F | __ | -30° to 280° | 29 | 3 1/8" | 3/4" | 00000000 | 000000 |
| 1/4" | 1.5 | 6000 psi @ 125° F | __ | -30° to 280° | 29 | 3 5/16" | 3/4" | 00000000 | 000000 |
| 3/8" | 1.5 | 6000 psi @ 125° F | __ | -30° to 280° | 29 | 3 7/16" | 3/4" | 00000000 | 000000 |
| 1/2" | 12 | 6000 psi @ 125° F | __ | -30° to 280° | 29 | 4 1/16" | 13/16" | 00000000 | 000000 |
On/Off Valves with Yor-Lok Fittings
For extra gripping power and a strong seal, the Yor-Lok fittings on these valves have two sleeves that bite into tubing as you tighten the nut. All are compatible with Swagelok®, Let-Lok, and Parker A-Lok fittings. Valves are standard port, so they slightly restrict flow.
Brass valves have good corrosion resistance.
Nickel-plated brass valves are more corrosion resistant than plain brass valves, and have a polished finish.
316 stainless steel valves are more corrosion resistant than brass valves.
Lockable lever handles can be fixed in place using a padlock (not included) with a shackle diameter up to 5/16".
Valves with T-handles are compact, allowing valves to be installed directly next to each other or in other tight spaces. They resist accidental movement when snagged or bumped.
Valves with oval handles resist accidental movement when snagged or bumped.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
- Valve Type: Ball
- For Use With: Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon
- Seal Material: Fluoroelastomer Rubber
| For Tube OD | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Vacuum Rating, in. of Hg | End-to-End Lg. | Each | |
Brass Body | |||||||
|---|---|---|---|---|---|---|---|
Yor Lok × Yor Lok | |||||||
| 3/8" | 2.7 | 1000 psi @ 70° F | -15° to 400° | 29 | 2 9/16" | 0000000 | 000000 |
Nickel-Plated Brass Body | |||||||
Yor Lok × Yor Lok | |||||||
| 1/4" | 1.6 | 1000 psi @ 70° F | -15° to 400° | 29 | 2 9/16" | 0000000 | 00000 |
| 3/8" | 1.6 | 1000 psi @ 70° F | -15° to 400° | 29 | 2 9/16" | 0000000 | 00000 |
- Valve Type: Ball
- For Use With: Argon, Helium, Krypton, Neon, Oil, Water, Xenon
- Seal Material: PTFE Plastic
| For Tube OD | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | End-to-End Lg. | For Max. Shackle Dia. | Each | |
316 Stainless Steel Body | |||||||
|---|---|---|---|---|---|---|---|
Yor Lok × Yor Lok | |||||||
| 1/4" | 1.3 | 2000 psi @ 100° F | -30° to 400° | 3 9/16" | 11/32" | 0000000 | 000000 |
| 3/8" | 2.5 | 2000 psi @ 100° F | -30° to 400° | 3 9/16" | 11/32" | 0000000 | 00000 |
| 1/2" | 9.3 | 2000 psi @ 100° F | -30° to 400° | 3 3/4" | 11/32" | 0000000 | 00000 |
| 3/4" | 12.7 | 2000 psi @ 100° F | -30° to 400° | 4 7/16" | 11/32" | 0000000 | 000000 |
| 1" | 17.4 | 2000 psi @ 100° F | -30° to 400° | 5 1/8" | 11/32" | 0000000 | 000000 |
| 6mm | 1.3 | 2000 psi @ 100° F | -30° to 400° | 3 9/16" | 11/32" | 0000000 | 00000 |
| 8mm | 1.4 | 2000 psi @ 100° F | -30° to 400° | 3 9/16" | 11/32" | 0000000 | 00000 |
| 10mm | 2.6 | 2000 psi @ 100° F | -30° to 400° | 3 9/16" | 11/32" | 0000000 | 00000 |
| 12mm | 9.3 | 2000 psi @ 100° F | -30° to 400° | 3 3/4" | 11/32" | 0000000 | 000000 |
| 15mm | 9.3 | 2000 psi @ 100° F | -30° to 400° | 3 3/4" | 11/32" | 0000000 | 000000 |
- Valve Type: Ball
- For Use With: Argon, Helium, Krypton, Neon, Oil, Water, Xenon
- Seal Material: PTFE Plastic
- Valve Type: Ball
- For Use With: Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon
- Seal Material: Fluoroelastomer Rubber
| For Tube OD | Flow Coefficient (Cv) | Max. Pressure | Temperature Range, °F | Vacuum Rating, in. of Hg | End-to-End Lg. | Each | |
Brass Body | |||||||
|---|---|---|---|---|---|---|---|
Yor Lok × Yor Lok | |||||||
| 1/4" | 1.6 | 1000 psi @ 70° F | -15° to 400° | 29 | 2 1/2" | 0000000 | 000000 |
| 3/8" | 1.6 | 1000 psi @ 70° F | -15° to 400° | 29 | 2 1/2" | 0000000 | 00000 |
Nickel-Plated Brass Body | |||||||
Yor Lok × Yor Lok | |||||||
| 1/4" | 1.6 | 1000 psi @ 70° F | -15° to 400° | 29 | 2 1/2" | 0000000 | 00000 |
| 3/8" | 1.6 | 1000 psi @ 70° F | -15° to 400° | 29 | 2 1/2" | 0000000 | 00000 |
On/Off Valves with Yor-Lok Fittings for Chemicals
- Valve Type: Ball
- For Use With: Acetone, Air, Ammonia, Argon, Carbon Dioxide, Deionized Water, Diesel Fuel, Ethanol, Fuel Oil, Gasoline, Helium, Isopropyl Alcohol, Kerosene, Krypton, Liquid Argon, Liquid Carbon Dioxide, Liquid Nitrogen, Liquid Oxygen, Methanol, Neon, Xenon
- Ball Material: 316 Stainless Steel
- Seal Material: PTFE Plastic
- Seat Material: PTFE Plastic
- Specifications Met: ANSI/ASME B16.34
For extra gripping power and a strong seal, the Yor-Lok fittings on these valves have two sleeves that bite into tubing as you tighten the nut. All are compatible with Swagelok®, Let-Lok, and Parker A-Lok fittings. These valves have a PTFE seal and a corrosion-resistant 316 stainless steel body that can stand up to aggressive and corrosive solutions in chemical-processing applications. All are standard port, so they slightly restrict flow.
Panel-Mount Threaded Diverting Valves
- Valve Type: Ball
- For Use With: Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon
- Seal Material: See table
For installation in instrument panels, these valves have threads and a hex nut below the handle. They divert flow between ports. Turn the handle to direct flow from the bottom-port inlet to either side-port outlet or shut off flow completely.
Full-port valves do not restrict flow.
Standard-port valves slightly restrict flow.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
| Pipe Size | Flow Pattern | Port Type | Flow Coefficient (Cv) | Max. Pressure | Temp. Range, °F | Vacuum Rating, in. of Hg | Panel Cutout Dia. | Seal Material | End-to-End Lg. | Each | |
Brass Body | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
NPT Female × NPT Female × NPT Female | |||||||||||
| 1/8 | L-Pattern | Full | 1.57 | 1500 psi @ 70° F | -30° to 300° | 29 | 9/16" | Buna-N Rubber, Fluoroelastomer Rubber | 1 13/16" | 0000000 | 000000 |
| 1/4 | L-Pattern | Full | 1.57 | 1500 psi @ 70° F | -30° to 300° | 29 | 9/16" | Buna-N Rubber, Fluoroelastomer Rubber | 1 13/16" | 0000000 | 00000 |
| 3/8 | L-Pattern | Standard | 2.74 | 1000 psi @ 70° F | -30° to 300° | 29 | 9/16" | Buna-N Rubber, Fluoroelastomer Rubber | 2 1/4" | 0000000 | 00000 |
| 1/2 | L-Pattern | Standard | 2.74 | 1000 psi @ 70° F | -30° to 300° | 29 | 9/16" | Buna-N Rubber, Fluoroelastomer Rubber | 2 3/8" | 0000000 | 00000 |
NPT Male × NPT Male × NPT Male | |||||||||||
| 1/8 | L-Pattern | Full | 1.57 | 1500 psi @ 70° F | -30° to 300° | 29 | 9/16" | Buna-N Rubber, Fluoroelastomer Rubber | 1 15/16" | 0000000 | 00000 |
| 1/4 | L-Pattern | Full | 1.57 | 1500 psi @ 70° F | -30° to 300° | 29 | 9/16" | Buna-N Rubber, Fluoroelastomer Rubber | 2" | 0000000 | 00000 |
| 3/8 | L-Pattern | Standard | 2.74 | 1000 psi @ 70° F | -30° to 300° | 29 | 9/16" | Buna-N Rubber, Fluoroelastomer Rubber | 2 11/16" | 0000000 | 00000 |
| 1/2 | L-Pattern | Standard | 2.74 | 1000 psi @ 70° F | -30° to 300° | 29 | 9/16" | Buna-N Rubber, Fluoroelastomer Rubber | 2 5/8" | 0000000 | 000000 |
Diverting Valves with Yor-Lok Fittings
- Valve Type: Ball
- For Use With: Air, Argon, Helium, Krypton, Neon, Oil, Water, Xenon
- Seal Material: See table
For extra gripping power and a strong seal, these valves have Yor-Lok fittings with two sleeves that bite into tubing as you tighten the nut. All are compatible with Swagelok®, Let-Lok, and Parker A-Lok fittings. Valves divert flow between ports. Turn the handle to direct flow from the bottom-port inlet to either side-port outlet. Valves are standard port, so they slightly restrict flow. All have threads and a hex nut below the handle for panel mounting.
Valves with flow shut-off can stop flow completely in addition to diverting flow between outlet ports.
316 stainless steel valves are more corrosion resistant than brass valves.
Flow coefficient (Cv) is the amount of water (in gallons per minute) at 60° F that will flow through a fully open valve with a difference of 1 psi between the inlet and the outlet.
For technical drawings and 3-D models, click on a part number.
| For Tube OD | Flow Pattern | Flow Shut-Off | Flow Coefficient (Cv) | Max. Pressure | Temp. Range, °F | Vacuum Rating, in. of Hg | Seal Material | End-to-End Lg. | Each | |
Brass Body | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Yor Lok × Yor Lok × Yor Lok | ||||||||||
| 1/8" | L-Pattern | No | 0.15 | 3000 psi @ 70° F | -30° to 400° | 29 | PTFE Plastic | 3 1/8" | 0000000 | 000000 |
| 1/8" | L-Pattern | Yes | 0.22 | 1500 psi @ 70° F | -30° to 300° | 29 | Buna-N Rubber, Fluoroelastomer Rubber | 2 3/8" | 0000000 | 00000 |
| 1/4" | L-Pattern | No | 0.9 | 3000 psi @ 70° F | -30° to 400° | 29 | PTFE Plastic | 3 5/16" | 0000000 | 00000 |
| 1/4" | L-Pattern | Yes | 0.88 | 1500 psi @ 70° F | -30° to 300° | 29 | Buna-N Rubber, Fluoroelastomer Rubber | 2 9/16" | 0000000 | 00000 |
| 3/8" | L-Pattern | No | 0.6 | 3000 psi @ 70° F | -30° to 400° | 29 | PTFE Plastic | 3 7/16" | 0000000 | 000000 |
| 3/8" | L-Pattern | Yes | 1.57 | 1000 psi @ 70° F | -30° to 300° | 29 | Buna-N Rubber, Fluoroelastomer Rubber | 2 5/8" | 0000000 | 00000 |
| 1/2" | L-Pattern | No | 4.6 | 3000 psi @ 70° F | -30° to 400° | 29 | PTFE Plastic | 4" | 0000000 | 000000 |
| 1/2" | L-Pattern | Yes | 2.74 | 1000 psi @ 70° F | -30° to 300° | 29 | Buna-N Rubber, Fluoroelastomer Rubber | 3 1/8" | 0000000 | 000000 |
316 Stainless Steel Body | ||||||||||
Yor Lok × Yor Lok × Yor Lok | ||||||||||
| 1/16" | L-Pattern | No | 0.08 | 6000 psi @ 125° F | -30° to 280° | 29 | PTFE Plastic | 2 3/4" | 00000000 | 000000 |
| 1/8" | L-Pattern | No | 0.15 | 6000 psi @ 125° F | -30° to 280° | 29 | PTFE Plastic | 3 1/8" | 00000000 | 000000 |
| 1/4" | L-Pattern | No | 0.9 | 6000 psi @ 125° F | -30° to 280° | 29 | PTFE Plastic | 3 5/16" | 00000000 | 000000 |
| 3/8" | L-Pattern | No | 0.6 | 6000 psi @ 125° F | -30° to 280° | 29 | PTFE Plastic | 3 7/16" | 00000000 | 000000 |
| 1/2" | L-Pattern | No | 4.6 | 6000 psi @ 125° F | -30° to 280° | 29 | PTFE Plastic | 4 1/16" | 00000000 | 000000 |