A plastic cover on the barrel provides electrical insulation.

A plastic cover on the barrel provides electrical insulation rated to 600 volts.

Heat these terminals to shrink the insulation, creating a seal that keeps out water, salt, and contaminants.

A plastic cover on the barrel provides electrical insulation.

Rated UL 94V0 for flame resistance, these terminals are made of flame-retardant, self-extinguishing material to reduce the risk of fire.

A plastic cover on the barrel provides electrical insulation.

A plastic cover on the barrel provides electrical insulation rated to 600 volts.

A plastic cover on the barrel provides electrical insulation rated to 600 volts.

When heat is applied, the insulation shrinks and creates a seal that keeps out water, salt, and contaminants.

The elongated ring can be mounted with a range of screw sizes.

Save preparation time—these cords are ready-to-use with ring terminals on each end of a single-conductor wire.

When heat is applied, the enclosed solder melts and the insulation shrinks, creating the most secure, electrically conductive, and environmentally sealed connection we offer.

A plastic cover on the barrel provides electrical insulation rated to 600 volts.

When heat is applied, the insulation shrinks and creates a seal that keeps out water, salt, and contaminants.

A plastic cover on the barrel provides electrical insulation rated to 600 volts.

Tap and splice multiple wires together at the same time.

When heat is applied, adhesive-lined insulation shrinks and bonds to the wires, creating a moisture- and corrosion-resistant seal.

Crimp the barrel twice on each end for an extra-tight grip in high-vibration applications. A plastic cover fully insulates these splices.

When heat is applied, adhesive-lined insulation shrinks and bonds to wires, creating a moisture- and corrosion-resistant seal.

The most secure, electrically conductive, and environmentally sealed connection we offer, these splices have enclosed solder that melts when heat is applied.

These splices are filled with a sealant that creates a barrier to completely keep out moisture when splices are crimped.

A plastic cover fully insulates these splices.

Join wires in the dirtiest, wet, and harsh environments. These splices meet one of the toughest IP ratings—IP68.

Push stripped wire into each end of these splices to make a connection.

With a ring of solder on the inside, these heat-shrink splices create secure, water-resistant connections between wires without the need for a crimping tool.

Push stripped wires into connectors for a reliable connection that's faster to install than twisting or crimping.

Filled with silicone, these connectors seal out moisture and prevent corrosion.

Made of porcelain, these connectors can withstand temperatures up to 1200° F.

Large enough to be used with a wide range of wire sizes, these connectors can still fit into cramped outlet boxes.

Suitable for use underground, these connectors consist of a twist-on wire connector and an abrasion- and moisture-resistant insulator tube.

Press down on the clamp to connect wires and pull it up to disconnect.

Tap a main wire or add a finished terminal to the end of a wire.

Taps connect to wires with male quick-disconnect terminals.