Soft and easy to install, this insulation restricts absorption of water, air, and gas. It is often used on cold and hot water lines and refrigeration lines.

Less flexible than rubber foam, this insulation restricts absorption of water, air, and gas. It is typically used in plumbing applications

Very rigid with a 0% water absorption rate, this insulation is unaffected by corrosive environments, organic solvents, and most acids. It is typically used in chemical-processing systems and underground lines.

Rigid and flame resistant, these insulation tubes are typically used in process piping and mechanical systems.

These rigid, lightweight melamine foam tubes are wrapped in an ISO Class 5 and Fed. Spec. Class 100 clean room jacket that is suitable for sanitary and washdown applications. They’re typically used on cold and hot water piping and with refrigeration systems.

Superior in strength and durability, these thin strips insulate as well as protect personnel from accidental contact with hot pipes. Use for exhaust, hot water, and process pipes.

These kits insulate one P-trap and two stop valves to reduce the risk of burns from accidental contact with hot pipes under your sink. The molded, flexible pipe covers are ADA compliant when properly installed.

This very rigid insulation offers the lowest heat-flow rate of our pipe insulation and restricts absorption of water, air, and gas. It is typically used in process piping and chiller plants and performs best in applications below 50° F.

Protect insulation from light impact and moisture with this durable PVC jacketing.

Save installation time with banding that’s ready to use. It has an easy-to-close fastener on one end.

Protect and repair insulation with this cotton fiber and resin mesh.

The most common of our flexible high-temperature sheets, these are used to insulate furnaces.

Made of flexible composite paper, these sheets won't shrink or lose shape in the high temperatures of air furnaces and hot water tanks.

These durable sheets resist compression and are often used in oven and power-generating applications.

Thinner than most rigid insulation for furnaces and other high-heat applications, these millboard sheets are also used for gasket fabrication.

These lightweight flexible fiberglass sheets are typically used to insulate equipment and appliances.

Typically used in ovens and furnaces, these are the most efficient of our rigid high-temperature insulation sheets. Please note that they require special care when installing since the crumbly material is difficult to work with and will crack easily. Sheets lose strength over time and are intended to be installed behind another facing or insulation material.

The perforated vinyl facing allows moisture to evaporate and resists cracking and fading. These flexible sheets are good for insulating large enclosures.

Wet these rigid sheets and they become formable. They can be molded multiple times until exposed to heat, which causes them to become rigid again.

Stronger than standard firebricks but with lower insulation capabilities, these withstand heavy abrasion on the floors and sides of furnaces. Also known as hard firebricks.

Often used in furnaces, these firebricks have been machined for a snug fit to minimize heat loss.

These sheets resist the absorption of water, air, and gas and are widely used in cold-storage and packaging applications.

Attach these hanger studs to a flat surface, then press your insulation sheets onto the spikes and secure with a washer.

This two-part expanding foam insulation meets ASTM E84 20/400 for flame and smoke and covers large areas.

Expanding quickly to fill large voids, this foam insulation begins to harden in 4 minutes and can be cut within 10 minutes.

Typically used as duct wrap, these flexible sheets consist of polyethylene bubbles covered with aluminum polyester foil that prevent 96% of heat from radiating into or away from duct. Use on rectangular and round ductwork.

Insulate rectangular ductwork.

Spray on this clear gel to protect components and surfaces from heat damage and discoloration caused by soldering, welding, and brazing. It is nonstaining and won't leave a residue.

Line toolboxes and drawers to cushion and protect small parts.

This synthetic felt is an economical alternative to wool felt.

Commonly used as curtains and in sealing applications.

Pores allow for air circulation, so these sheets are often used in drying applications.

With larger openings than porous fiberglass fabric, these sheets allow for more air circulation in drying applications.

A blend of aramid and fiberglass, this fabric resists mildew and abrasion. It is self-extinguishing and won't melt, so it's often used for insulation applications.

This abrasion-resistant fabric sheds molten metal spatter when placed at an incline of 15° or greater. Use as a welding curtain.

Use these strips for high-temperature seals and heat insulation.

More flexible than standard silica fabric, wrap these sheets and strips to insulate pipes, wires, and hose. This fabric also protects against welding spatter.

This cotton fabric is treated to resist flames. Use as tarps.

Use these sheets to quiet noisy areas and line machine enclosures. They’re made of humidity-resistant polyurethane foam and have a smooth, easy-to-clean facing on both sides.

This insulation meets ASTM E162 for flame retardance and ASTM E662 for smoke output. Use to quiet noisy areas and line machine enclosures. Sheets are made of polyimide foam.

Also known as egg crate, these sheets have peaks and valleys that absorb more sound at higher frequencies than flat-surface sheets. Use them to quiet noisy areas and line machine enclosures. Sheets are made of humidity-resistant polyurethane foam.

Made of melamine foam, these sheets meet UL 94 V-0 for flame retardance and ASTM E84 5/20 for flame and smoke. Use them to quiet noisy areas and line machine enclosures. Sheets are peaked on one side for more sound-absorbing area than flat-surface sheets.

The best sound absorbers of all our rigid sheets, use to quiet noisy areas in your facility. They're peaked on one side for more sound-absorbing area than flat sheets. Made of melamine, they have an acrylic resin finish that resists dust and dirt and wipes clean.

Hang these nylon-covered fiberglass cylinders in areas with high ceilings to absorb sound from all directions. Each cylinder is equivalent to 10 to 15 sq. ft. of acoustical ceiling tiles.

Apply these coatings to irregular shapes and large areas and reduce noise caused by vibration. Keep applying coats until desired noise reduction is achieved.

Suspend these thin sheets to reflect sound and block noise from traveling to other parts of your facility.

Clip these saddles around the outside of strut channel for a quick way to route insulated tubing and pipe. Lips on either end of the saddle protect insulation from abrasion if the pipe should move.

With an aramid honeycomb core sandwiched between carbon fiber or fiberglass for rigidity, these panels are strong, but lightweight, and won’t conduct heat. Often used as wall panels in structural and insulating applications, they’re a lightweight alternative to solid composite and aluminum honeycomb panels.