Insulation Type Insulation Type |
---|
![]() | Coating |
![]() | Sheet/Strip |
![]() | Spray Foam |
Maximum Temperature Maximum Temperature |
---|
|
For Use On For Use On |
---|
|
Approximate Coverage Approximate Coverage |
---|
Container Size Container Size |
---|
|
|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement) |
---|
Density Density |
---|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
---|
|
Useful Life Useful Life |
---|
|
Heat Flow Rate Heat Flow Rate |
---|
|
Specifications Met Specifications Met |
---|
|
About Selecting Thermal Insulation
More
Pipe Insulation Coatings

An alternative to jacketing, these coatings create a vapor barrier and protect from conditions outdoors. They are often used on irregularly shaped surfaces, such as fittings, flanges, and valves.
Pipe Condensation-Reducing Coatings


Prevent condensation from forming on refrigeration and air conditioning lines and cold-water piping. All coatings adhere to metal.
Mastic coatings adhere to PVC and CPVC in addition to metal.
Pipe Insulation Repair Strips

- Max. Temperature: 900° F
- Density: See table
- Color: White
Protect and repair insulation with this cotton fiber and resin mesh. For small sections, dip the strip in warm water for five seconds then install. For large sections, apply dry to piping and spray with water. Strips harden in 10 minutes. Once hardened, they can be painted.
Pipe Condensation-Reducing Rubber Strips

Wrap pipes, tubing, and fittings to prevent condensation from forming. These strips are for use on copper, iron, and steel.
Rubber strips are bacteria and UV resistant to protect pipe from corrosion above and below ground.
Vinyl foam strips restrict absorption of water, air, and gas. These strips have a foil covering.
For technical drawings and 3-D models, click on a part number.
Thick. | Wd. | Lg., ft. | Temperature Range, °F | Flexibility | Backing Type | Color | Each | |
Rubber | ||||||||
---|---|---|---|---|---|---|---|---|
1/32" | 2" | 75 | -20° to 140° | Flexible | Adhesive | Gray | 0000000 | 000000 |
1/32" | 4" | 75 | -20° to 140° | Flexible | Adhesive | Gray | 0000000 | 000000 |
1/32" | 6" | 75 | -20° to 140° | Flexible | Adhesive | Gray | 0000000 | 000000 |
Vinyl Foam | ||||||||
1/8" | 2" | 30 | -40° to 180° | Flexible | Adhesive | Silver | 0000000 | 00000 |
Butyl Rubber | ||||||||
1/8" | 2" | 30 | -30° to 175° | Flexible | Adhesive | Off-White | 000000 | 00000 |
Cork/Rubber Blend | ||||||||
1/8" | 2" | 30 | 20° to 190° | Flexible | Adhesive | Black | 00000000 | 00000 |
Firebrick Bonding Mortar

- Max. Temperature: 3000° F
- Density: 129 lbs./cu. ft.
- Color: Gray
Lay, coat, and bond firebricks. Apply this mortar with a trowel. One pail sets approximately 40 bricks.
Container Net Weight, lbs. | Approximate Coverage | Each | |
15 | 40 Bricks | 000000 | 000000 |
Firebrick Repair Coatings

- Temperature Range: -50° to 2350° F
- Density: 100 lbs./cu. ft.
- Color: Beige
Renew heat resistance and performance of worn firebrick. Apply coating with a brush or spray on for a crack-free seal.
Container Size, gal. | Approximate Coverage, sq. ft. | Each | |
1 | 93 | 000000 | 0000000 |
Extreme-Temperature Cement

- Max. Temperature: 2500° F
- Density: 122 lbs./cu. ft.
- Color: Beige
Set and repair cast iron and steel furnaces, heaters, stoves, and boilers with this ready-to-use cement. It experiences minimal shrinkage for a permanent smokeproof and gasproof joint. Apply with a trowel or a spatula. A minimum temperature of 212° F is required to harden. Cut hardened cement with a carbide-tipped saw.
Heat Barrier Putty

Form this reusable putty around metal pipes and tubing or spread on a flat metal surface to stop heat from traveling to adjoining surfaces when soldering, welding, and brazing.
Container Size, fl. oz. | Begins to Harden, hrs. | Useful Life | Max. Temp., °F | Color | Each | |
16 | 12 | Reusable | 2000° | Gray | 00000000 | 000000 |
Heat Barrier Gel

Spray on this clear gel to protect components and surfaces from heat damage and discoloration caused by soldering, welding, and brazing. It is nonstaining and won't leave a residue.
Container Size, fl. oz. | Approximate Coverage, sq. ft. | Min. Temp., °F | Density, lbs./gal. | Each | |
32 | 40 | 32° | 9 | 000000 | 000000 |
Spray Foam Insulation

- Temperature Range: -200° to 240° F
- Heat Flow Rate: 0.2 Btu @ 72° F
- Density: 1.2 lbs./cu. ft.
- Color: Beige
- Specifications Met: ASTM E84 25/50 for Flame and Smoke
Fill cracks with this single-use can of expanding foam insulation. It hardens enough to be cut in one hour and reaches full strength in 24 hours.
Each | |||||||||
---|---|---|---|---|---|---|---|---|---|
Container Net Weight, oz. | Approximate Coverage | Begins to Harden, hrs. | Reaches Full Strength, hrs. | Useful Life | Includes | Specifications Met | 1-11 | 12-Up | |
12 | 16 sq. ft. (1/2" bead) | 1 | 24 | One-Time Use | One Dispensing Tube | ASTM E84 25/50 for Flame and Smoke | 0000000 | 000000 | 000000 |
24 | 32 sq. ft. (1/2" bead) | 1 | 24 | One-Time Use | One Dispensing Tube | ASTM E84 25/50 for Flame and Smoke | 0000000 | 00000 | 00000 |
24 | 32 sq. ft. (1/2" bead) | 1 | 24 | One-Time Use | One Dispensing Tube | ASTM E84 25/50 for Flame and Smoke | 0000000 | 00000 | 00000 |
Quick-Cure Spray Foam Insulation

- Temperature Range: -40° to 175° F
- Heat Flow Rate: Not Rated
- Density: 1.9 lbs./cu. ft.
- Color: Blue
- Specifications Met: ASTM E84 25/210 for Flame and Smoke
Expanding quickly to fill large voids, this foam insulation begins to harden in 4 minutes and can be cut within 10 minutes.
Container Net Weight, oz. | Approximate Coverage, cu. ft. | Begins to Harden, min. | Useful Life | Includes | Each | |
12 1/2 | 0.3 | 4 | One-Time Use | Two Dispensing Tubes | 00000000 | 000000 |
Void-Filling Spray Foam Insulation

Cover large areas with this two-part expanding foam insulation. It can be cut after 5 minutes and reaches full strength in an hour. To use outdoors, paint or cover for UV resistance.
Reusable foam insulation comes with snap-tip nozzles that spray in either a fan or cone pattern.
- Temperature Range: -200° to 240° F
- Heat Flow Rate: 0.16 Btu @ 75° F
- Density: 2.2 lbs./cu. ft.
- Color: Beige
Container | ||||||
---|---|---|---|---|---|---|
Net Weight, lbs. | Type | Begins to Harden, min. | Reaches Full Strength, hrs. | Includes | Each | |
4 | Can | 5 | 1 | Two Cans of Foam with Two Cone Spray Nozzles | 0000000 | 000000 |
- Temperature Range: -200° to 200° F
- Heat Flow Rate: 0.16 Btu @ 75° F
- Density: 3.1 lbs./cu. ft.
- Color: Beige
Container | |||||||
---|---|---|---|---|---|---|---|
Net Weight, lbs. | Type | Approximate Coverage, cu. ft. | Begins to Harden, min. | Reaches Full Strength, hrs. | Includes | Each | |
15 | Cylinder | 5 | 5 | 1 | Two Cylinders with a Trigger-Style Gun and Ten Snap-Tip Nozzles | 0000000 | 0000000 |
30 | Cylinder | 9.6 | 5 | 1 | Two Cylinders with a Trigger-Style Gun and Ten Snap-Tip Nozzles | 0000000 | 000000 |
Snap-Tip Replacement Nozzles | 00000000 | Each | 00000 |
Flame-Retardant Void-Filling Spray Foam Insulation

- Temperature Range: -200° to 240° F
- Heat Flow Rate: 0.154 Btu @ 75° F
- Density: 1.75 lbs./cu. ft.
- Color: Beige
- Specifications Met: ASTM E84 10/350 for Flame and Smoke
This two-part expanding foam insulation meets ASTM standards for flame and smoke and covers large areas. It can be cut after 5 minutes and reaches full strength in an hour. To use outdoors, paint or cover for UV resistance. The included snap-tip nozzles spray in either a fan or cone pattern.
Spray Foam Insulation | Snap-Tip Replacement Nozzles | ||||||||
---|---|---|---|---|---|---|---|---|---|
Container Net Weight, lbs. | Approximate Coverage, cu. ft. | Begins to Harden, min. | Reaches Full Strength, hrs. | Useful Life | Includes | Each | Each | ||
15 | 7.7 cu. ft. | 5 | 1 | Reusable | Two Cylinders with a Trigger-Style Gun and Ten Snap-Tip Nozzles | 0000000 | 0000000 | 00000000 | 00000 |
30 | 14.9 cu. ft. | 5 | 1 | Reusable | Two Cylinders with a Trigger-Style Gun and Ten Snap-Tip Nozzles | 0000000 | 000000 | 00000000 | 0000 |