Apply these sealants on wet surfaces and in cold temperatures. They’re non-sagging, so they won't drip from vertical and overhead surfaces.

Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain. Sealants that are good for joining dissimilar materials also work well in environments with wide temperature fluctuation.

These sealants are non-sagging, so they won't drip from vertical and overhead surfaces.

Elongation and joint compression/expansion tolerance indicate flexibility. For joints between dissimilar materials and in environments with wide temperature fluctuation, choose a sealant with a higher elongation or joint compression/expansion tolerance. For high-wear applications, choose a harder sealant for the most abrasion resistance.

Clear enough to read through, these UV-resistant sealants allow optimal light transmission for use with solar cells and fiber optics. Sealants are non-sagging, so they won't drip from vertical and overhead surfaces.

Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement sealants can sustain.

Press this adhesive-backed plastic tape into place for an immediate light-duty seal. It has a score line for easy installation in a corner.

Also known as thumb-grade caulk, this forms a non-hardening, moisture-resistant seal that remains pliable.

Butyl rubber has a sticky, gummy consistency.

Butyl mastic has a clay-like consistency.

Caulk is non-sagging, so it won't drip from vertical and overhead surfaces.

Elongation and joint compression/expansion tolerance indicate flexibility—the higher the values are, the more joint movement a sealant can sustain. Caulk is best suited to joints between similar materials that aren't exposed to wide temperature fluctuation.

Seal glass windows in metal and wood fire-rated doors. Also known as glazing tape, it has an adhesive back with a peel-off liner.

These sealants don't degrade in sunlight. Also known as glazing compounds, use these sealants to install glass in framing. They’re non-sagging, so they won't drip from vertical and overhead surfaces. Made from silicone, these sealants are RTV (room-temperature vulcanizing).

Elongation and joint compression/expansion tolerance indicate flexibility. For joints between dissimilar materials and in environments with wide temperature fluctuation, choose a sealant with a higher elongation or joint compression/expansion tolerance.

Make seals that support glass under heavy loads in equipment and buildings. These sealants are also known as glazing compounds. They’re non-sagging, so they won't drip from vertical and overhead surfaces. Made from silicone, sealants are RTV (room-temperature vulcanizing).

Joint compression/expansion tolerance indicates flexibility—the higher the value is, the more joint movement a sealant can sustain.

Urethane adhesives are the most flexible, so they bond dissimilar materials and damp vibration.

The size listed is the combined total of the two parts. Dispense adhesives in 10.1 fl. oz. cartridges with a standard caulk gun.

292i resists moisture and does not require mixing.

Bond stone and glass to drywall, treated lumber, and subfloors with these adhesives.

Non-sag adhesives won't drip from vertical and overhead surfaces.

Adhesives that cannot be sold to the regions listed are restricted by labeling and reporting requirements in Canada, and by local regulatory limits on VOCs (volatile organic compounds) in the states listed.

An insulated handle protects against shock from accidental contact with live electrical circuits. These cutters are tested to 1,000 volts to meet IEC 60900 and ASTM F1505. They have grooved rollers that provide clearance to cut flared tube ends with little material loss.

No mixing required --these potting compounds come ready to apply. Use them to encase electronic assemblies for protection from dust, moisture, mechanical shock, and vibration. Softer and more flexible than epoxies and urethanes with the widest temperature range, silicone potting compounds are the best choice for high-temperature applications and electronics exposed to thermal cycling. They have good moisture resistance but poor chemical and abrasion resistance. Silicones provide excellent electrical insulation. They're also known as RTV (room-temperature vulcanizing).

Potting compounds that cannot be sold to California exceed local regulatory limits on VOCs (volatile organic compounds).

Encase electronic assemblies in a layer of silicone for protection from dust, moisture, mechanical shock, and vibration. Softer and more flexible than epoxies and urethanes with the widest temperature range, silicone potting compounds are the best choice for high-temperature applications and electronics exposed to thermal cycling. They have good moisture resistance but poor chemical and abrasion resistance. Silicones provide excellent electrical insulation. They’re also known as RTV (room-temperature vulcanizing).

Cartridge potting compound requires a gun (sold separately) to dispense; use it with the included mixer nozzle.