These sealants include a material certificate with traceable lot number, test report, and product shelf life.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Tested to meet ASTM E595, a standard used by NASA, these sealants fill joints and seams while releasing almost no volatile emissions that could damage sensitive electronics, even in a vacuum.

Also known as neutral-cure sealants, these won't discolor copper, brass, and concrete.

Clear enough to read through, this UV-resistant sealant allows optimal light transmission for use with solar cells and fiber optics.

Thinner than non-sagging sealants, this sealant flows easily into cracks and has a smooth finish.

A combination of hardness and surface tension makes these sealants resistant to punctures, cuts, and abrasion.

Also known as thumb-grade caulk, this forms a non-hardening, moisture-resistant seal that remains pliable.

These sealants include a material certificate with traceable lot number, test report, and product shelf life.

Apply these sealants in cold temperatures, on wet surfaces, and even through running water.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

These non-sagging sealants will not drip while hardening on vertical and overhead surfaces.

Press this pliable rope into place to hold glass in window frames and seal leaks.

Also known as glazing compounds, use these sealants to install glass in aluminum, steel, and wood framing.

Thinner than non-sagging sealants, these flow easily into cracks and have a smooth finish.

Tested to meet ASTM E595, a standard used by NASA, these compounds produce almost no volatile emissions that could damage sensitive electronics, even in a vacuum. Light passes through them easily, so they’re ideal for protecting solar cells and fiber optics.

Make repairs or changes to electrical components after they’ve been potted. While most compounds are permanent, these form a gel that bonds to itself, so you can peel it off without damaging your equipment.

Tough enough to be permanently submersed in seawater, these compounds protect sensitive electronics, such as circuit boards, semiconductors, and sensors in harsh environments.

Change the mix ratio of these heat-transfer potting compounds to achieve the right hardness for your application.

Clear enough to read through, these UV-resistant potting compounds allow optimal light transmission for use with LEDs, solar cells, and fiber optics.

Combine the flexibility of silicone with the durability of standard epoxy—these compounds are great for protecting sensitive electronics that need to flex or expand and contract.

In just 20 seconds under a UV light, these urethane compounds form into a strong protective layer on electrical components.