Store and transport liquids in bulk in sanitary environments such as food and pharmaceutical plants. These tanks have a one-piece sloped bottom for easy and complete drainage, a highly polished surface, and continuously welded seams. By leaving no room for liquid to hang around after use, their design prevents bacterial growth. Made of stainless steel, they resist frequent washdowns with harsh sanitizers. They connect with quick-clamp fittings—also known as tri-clamp fittings—so they’re easily disassembled for regular cleaning. Also known as intermediate bulk containers (IBCs), these tanks take up less floor space than drums. They can also be stacked up to three high to save additional space, even when full. All meet National Fire Protection Agency Code 30 for use with flammable and combustible liquids.

These tanks are UV resistant for long-term outdoor service.

These tanks are typically used for storing fuel and waste oil.

500-gal. capacity tank has nonslip steps and hand grips for easy access to the top of the tank.

Provide extra protection for products that require double-wall containment, such as diesel and waste oil, solvents, and antifreeze. The tank's second wall forms a spill-control compartment that holds 110% of the primary compartment's storage capacity. They have an opening for venting in the primary compartment, an opening for leak detection in the secondary compartment, and two openings for emergency venting in the primary and secondary compartments.

Built for intermediate bulk container (IBC) tanks, these pallets handle larger spills and heavier loads than other plastic pallets. They’re made of polyethylene plastic, so they’re good for use with chemicals, including acids. However, for environments with heavy wear and tear, steel pallets are the better choice. These pallets have a removable grating for easy cleaning.

When choosing a pallet, consider the surface area and capacity you need. For number of 275-gallon tanks gives you a sense of the surface area of your pallet, while capacity tells you how much liquid it can hold. When used correctly, these pallets meet EPA 40 CFR 264.175. Choose a pallet that’s large enough to hold either 10% of the total capacity of all the containers on it or the full capacity of the largest container—whichever is greater.

Pallets for 2 tanks have a single, continuous basin and can't be separated into individual pallets.

Pallets without a drain have fewer possible leak points, but they’re harder to clean after a spill. Pallets with a drain remove excess liquid, so you don’t need to remove the tanks or pump the liquid out.

Drape a box-shaped tarp (sold separately) over tanks stored outside to protect them from the elements.

Use a bucket (sold separately) to catch spills and drips when dispensing from the tank. The bucket holds up to three gallons. When the bucket fills too high, excess liquid is released into the pallet via an internal drain.

Store hazardous liquids outside and away from people and workspaces. These sheds are made of polyethylene, so they resist most chemicals, including acids. Their roll-up doors offer access from the front or back to move containers, dispense liquids, and protect contents from the elements. All have two or more holes to secure with padlocks (not included).

For use with 55 gal. drums or 275 gal. IBC tanks, these sheds meet EPA 40 CFR 264.175 when used correctly. Choose a shed that’s large enough to hold either 10% of the total capacity of all the containers on it or the full capacity of the largest container—whichever is greater.

Sheds without a drain have fewer potential leak points, but they’re harder to empty after a spill. Sheds with a drain let you empty liquid after a spill without having to remove containers or pump liquids out through the top.

Sheds with a removable grating are easy to clean.

Sheds that hold two 275 gal. tanks have a single, continuous basin, so they can’t be separated into individual sheds.

Unassembled sheds are simple to put together—no fasteners required.

Add a bucket (sold separately) to catch spills and drips when dispensing from the tank. The bucket holds up to 3 gallons. When the bucket fills too high, excess liquid is released into the well of the shed.

Dispense chemicals from a line that attaches and detaches from your drum or intermediate bulk container (IBC) in seconds. These nozzles and the included hose come with fittings that connect when you insert the plug into the socket and push the levers down. To resist corroding from citric acid, ethanol, and other chemicals, these nozzles are made of either polypropylene or aluminum and the hose is PVC. These nozzles are not designed for pressurized systems and should be used in applications where liquid can flow by gravity. Use the trigger to adjust how much they dispense at a time. These nozzles swivel to make directing the flow easier. Hook the included bracket onto the top of a drum or tank to hang the hose when not in use.

Polypropylene nozzles are lighter in weight than aluminum nozzles and resist corroding from harsher chemicals, such as phosphoric acid.

Aluminum nozzles resist wear and tear better than polypropylene nozzles.

Quickly set up a line to dispense chemicals—these nozzles come with a hose and fittings that thread onto your drum or intermediate bulk container (IBC). The nozzles are made of either polypropylene or aluminum and the hose is PVC to resist corroding from citric acid, ethanol, and other chemicals. However, the nozzles are not designed for pressurized systems and should be used in applications where liquid can flow by gravity. Use the trigger to adjust how much they dispense at a time. The nozzles swivel to make directing the flow easier. Hook the included bracket onto the top of a drum or tank to hang the hose when not in use.

Polypropylene nozzles are lighter in weight than aluminum nozzles and resist corroding from harsher chemicals, such as phosphoric acid.

Aluminum nozzles resist wear and tear better than polypropylene nozzles.