Built for intermediate bulk container (IBC) tanks, these pallets handle larger spills and heavier loads than other plastic pallets. They’re made of polyethylene plastic, so they’re good for use with chemicals, including acids. However, for environments with heavy wear and tear, steel pallets are the better choice. These pallets have a removable grating for easy cleaning.

When choosing a pallet, consider the surface area and capacity you need. For number of 275-gallon tanks gives you a sense of the surface area of your pallet, while capacity tells you how much liquid it can hold. When used correctly, these pallets meet EPA 40 CFR 264.175. Choose a pallet that’s large enough to hold either 10% of the total capacity of all the containers on it or the full capacity of the largest container—whichever is greater.

Pallets for 2 tanks have a single, continuous basin and can't be separated into individual pallets.

Pallets without a drain have fewer possible leak points, but they’re harder to clean after a spill. Pallets with a drain remove excess liquid, so you don’t need to remove the tanks or pump the liquid out.

Drape a box-shaped tarp (sold separately) over tanks stored outside to protect them from the elements.

Use a bucket (sold separately) to catch spills and drips when dispensing from the tank. The bucket holds up to three gallons. When the bucket fills too high, excess liquid is released into the pallet via an internal drain.

Store hazardous liquids outside and away from people and workspaces. These sheds are made of polyethylene, so they resist most chemicals, including acids. Their roll-up doors offer access from the front or back to move containers, dispense liquids, and protect contents from the elements. All have two or more holes to secure with padlocks (not included).

For use with 55 gal. drums or 275 gal. IBC tanks, these sheds meet EPA 40 CFR 264.175 when used correctly. Choose a shed that’s large enough to hold either 10% of the total capacity of all the containers on it or the full capacity of the largest container—whichever is greater.

Sheds without a drain have fewer potential leak points, but they’re harder to empty after a spill. Sheds with a drain let you empty liquid after a spill without having to remove containers or pump liquids out through the top.

Sheds with a removable grating are easy to clean.

Sheds that hold two 275 gal. tanks have a single, continuous basin, so they can’t be separated into individual sheds.

Unassembled sheds are simple to put together—no fasteners required.

Add a bucket (sold separately) to catch spills and drips when dispensing from the tank. The bucket holds up to 3 gallons. When the bucket fills too high, excess liquid is released into the well of the shed.

Also known as flexible intermediate bulk containers, these bags are an economical way to contain and ship a variety of materials. They have four corner straps for convenient forklift lifting; no special equipment or pallets required.

Skirt-top bags are reinforced with extra material at the top to help catch anything that might fall out.

Closed-top with inlet bags have a tube for controlled pouring, and are otherwise closed on top. Use them with filling station equipment, such as bulk bag fillers.

Bags with a bottom outlet with drawstring closure open and close to release and hold the material stored in them.

Octagonal-base bags remain stable regardless of how much they’re filled. Compared to rectangular bags, their shape is less prone to rounding out as they’re filled. There’s no need to transport these bags on a pallet because they hold their shape when moved.

Antistatic bags protect against static discharges and don’t need a grounding tab. Use them if flammables or explosives are nearby.

Style C has a woven construction that allows water drainage and airflow. It is often used for filtering sludge and dust collection.

Style D is reinforced to hold its shape so it can be stacked on a pallet.

Use pallets to stack bags during transit and storage. They have raised columns in the center to help bags stay upright and keep their edges from flowing over the side.

Quickly set up a line to dispense chemicals—these nozzles come with a hose and fittings that thread onto your drum or intermediate bulk container (IBC). The nozzles are made of either polypropylene or aluminum and the hose is PVC to resist corroding from citric acid, ethanol, and other chemicals. However, the nozzles are not designed for pressurized systems and should be used in applications where liquid can flow by gravity. Use the trigger to adjust how much they dispense at a time. The nozzles swivel to make directing the flow easier. Hook the included bracket onto the top of a drum or tank to hang the hose when not in use.

Polypropylene nozzles are lighter in weight than aluminum nozzles and resist corroding from harsher chemicals, such as phosphoric acid.

Aluminum nozzles resist wear and tear better than polypropylene nozzles.

Dispense chemicals from a line that attaches and detaches from your drum or intermediate bulk container (IBC) in seconds. These nozzles and the included hose come with fittings that connect when you insert the plug into the socket and push the levers down. To resist corroding from citric acid, ethanol, and other chemicals, these nozzles are made of either polypropylene or aluminum and the hose is PVC. These nozzles are not designed for pressurized systems and should be used in applications where liquid can flow by gravity. Use the trigger to adjust how much they dispense at a time. These nozzles swivel to make directing the flow easier. Hook the included bracket onto the top of a drum or tank to hang the hose when not in use.

Polypropylene nozzles are lighter in weight than aluminum nozzles and resist corroding from harsher chemicals, such as phosphoric acid.

Aluminum nozzles resist wear and tear better than polypropylene nozzles.

Pour freely into tanks—the wide mouth on these funnels keeps large amounts of liquid from spilling. These funnels have a spout that slots into any style of bung hole on tanks and drums. Ridges on the inside of these funnels allow liquids to drain quickly and reduce splashing during pouring.

Lids keep out dust and contaminants and help contain odors. Use them to securely cover funnels when not in use.

Strainers create a flat surface on the top of a funnel so you can set containers upside down to drain. They also filter out large debris.

Liquid level indicators help monitor the tank’s fill level to keep from overfilling.

Mounting hardware lets you permanently and securely attach the funnel to your tank.