Minimum Hole Diameter Minimum Hole Diameter |
|---|
|
|
|
Component Component |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
Material Grade Material Grade |
|---|
|
Quick-Change Lathe Tools and Holders
Reduce tooling setup time—install the holder once and alternate between applications by switching out the bit. Once the holder has been aligned with the centerline of the lathe, the locking system ensures alignment repeatability from tool to tool.
For technical drawings and 3-D models, click on a part number.
Internal profiling tools contour the interior wall of a hollow workpiece.
| Min. Hole Dia. | Max. Hole Dp. | Offset | Tip Radius | Material | For Use On | Each | |
3/16" Shank Dia. | |||||||
|---|---|---|---|---|---|---|---|
| 0.07" | 1/2" | 0.025" | 0.005" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 000000 | 000000 |
| 0.11" | 1/4" | 0.04" | 0.005" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 000000 | 00000 |
| 0.11" | 1/2" | 0.04" | 0.005" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 000000 | 00000 |
| 0.12" | 1/4" | 0.05" | 0.008" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 000000 | 00000 |
| 0.12" | 1/2" | 0.05" | 0.008" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 000000 | 00000 |
| 0.12" | 3/4" | 0.05" | 0.008" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 000000 | 00000 |
| 0.16" | 1" | 0.05" | 0.008" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 000000 | 00000 |
1/4" Shank Dia. | |||||||
| 0.18" | 1/2" | 0.08" | 0.008" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 000000 | 00000 |
| 0.18" | 1" | 0.08" | 0.008" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 000000 | 00000 |
5/16" Shank Dia. | |||||||
| 0.23" | 1" | 0.08" | 0.008" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 0000000 | 00000 |
| 0.23" | 1 1/4" | 0.08" | 0.008" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 0000000 | 00000 |
| 0.3" | 1" | 0.11" | 0.008" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 0000000 | 00000 |
3/8" Shank Dia. | |||||||
| 0.36" | 1" | 0.13" | 0.008" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 0000000 | 00000 |
| 0.36" | 1 1/4" | 0.13" | 0.008" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 0000000 | 00000 |
1/2" Shank Dia. | |||||||
| 0.46" | 1" | 0.15" | 0.008" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 0000000 | 00000 |
| 0.46" | 1.8" | 0.15" | 0.008" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 0000000 | 000000 |
| 0.49" | 1" | 0.15" | 0.008" | Micrograin Carbide | Aluminum, Brass, Bronze, Cast Iron, Nickel, Plastic, Stainless Steel, Steel, Titanium | 0000000 | 00000 |
Long-Reach Internal Profiling Lathe Tools
An extra-long shank provides additional reach for contouring the interior wall of deep holes. All have flats on the shank for quick alignment.
For technical drawings and 3-D models, click on a part number.
| Shank Dia. | Min. Hole Dia. | Max. Hole Dp. | Offset | Overall Lg. | Tip Radius | For Use On | Each | |
Right Hand | ||||||||
|---|---|---|---|---|---|---|---|---|
Micrograin Carbide | ||||||||
| 1/4" | 0.36" | 3 3/8" | 0.1" | 4 3/8" | 0.010" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | 0000000 | 000000 |
| 5/16" | 0.42" | 3 3/8" | 0.1" | 4 3/8" | 0.015" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | 0000000 | 00000 |
| 3/8" | 0.48" | 5 3/8" | 0.1" | 6 3/8" | 0.015" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | 0000000 | 000000 |
| 1/2" | 0.615" | 5 3/8" | 0.11" | 6 3/8" | 0.015" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | 0000000 | 000000 |
| 5/8" | 3/4" | 5 3/8" | 1/8" | 6 3/8" | 0.020" | Aluminum, Brass, Bronze, Cast Iron, Nickel, Stainless Steel, Steel | 0000000 | 000000 |
Internal Profiling Carbide Insert Holders
Contour the interior wall of a hollow workpiece when you pair a holder with a compatible insert (sold separately).
For technical drawings and 3-D models, click on a part number.
Holders | Replacement Torx Screws | Replacement Torx Keys | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Shank Dia. | Neck Dia. | Min. Hole Dia. | Max. Hole Dp. | Offset | O'all Lg. | Material | For Insert Code | Each | Each | Each | |||
Right Hand | |||||||||||||
| 1/2" | 0.312" | 0.52" | 1 1/4" | 0.175" | 4" | Steel | XPGT-1 | 0000000 | 0000000 | 000000000 | 00000 | 0000000 | 00000 |
| 1/2" | 0.375" | 0.58" | 1 1/2" | 0.175" | 4" | Steel | XPGT-1 | 0000000 | 000000 | 000000000 | 0000 | 0000000 | 0000 |
| 1/2" | 0.438" | 0.64" | 1 3/4" | 0.175" | 4" | Steel | XPGT-1 | 0000000 | 000000 | 000000000 | 0000 | 0000000 | 0000 |
| 5/8" | 0.438" | 0.76" | 1 3/4" | 0.292" | 5" | Steel | VPGT-2 | 0000000 | 000000 | 000000000 | 0000 | 0000000 | 0000 |
| 3/4" | 0.563" | 0.88" | 2 1/4" | 0.292" | 5" | Steel | VPGT-2 | 0000000 | 000000 | 000000000 | 0000 | 0000000 | 0000 |
| 1" | 0.688" | 1.1" | 2 3/4" | 0.292" | 6" | Steel | VPGT-2 | 0000000 | 000000 | 000000000 | 0000 | 0000000 | 0000 |
Combine a carbide insert with a compatible internal profiling holder to create a tool that can contour the interior wall of a hollow workpiece. When one edge of the insert dulls, just rotate it in the holder to use another side.
C2 carbide inserts are abrasion resistant and less likely to chip or crack than C6 carbide when cutting aluminum, brass, and bronze.
C6 carbide inserts hold up better than C2 carbide when making cuts in steel and stainless steel.
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | For Use On | Each | |
C2 Carbide | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| XPGT-1 | 0.187" | 0.094" | 0.27" | 0.007" | Finishing | Uncoated | Aluminum, Brass, Bronze | 0000000 | 000000 |
| VPGT-2 | 1/4" | 1/8" | 0.39" | 0.015" | Finishing | Uncoated | Aluminum, Brass, Bronze | 0000000 | 00000 |
C6 Carbide | |||||||||
| XPGT-1 | 0.187" | 0.094" | 0.27" | 0.007" | Finishing | Uncoated | Stainless Steel, Steel | 0000000 | 00000 |
| VPGT-2 | 1/4" | 1/8" | 0.39" | 0.015" | Finishing | Uncoated | Stainless Steel, Steel | 0000000 | 00000 |
Carbide Inserts for Internal Profiling Carbide Insert Holders
Combine a carbide insert with a compatible internal profiling holder to create a tool that can contour the interior wall of a hollow workpiece. When one edge of the insert dulls, just rotate it in the holder to use another side.
C2 carbide inserts are abrasion resistant and less likely to chip or crack than C6 carbide when cutting aluminum, brass, and bronze.
C6 carbide inserts hold up better than C2 carbide when making cuts in steel and stainless steel.
For technical drawings and 3-D models, click on a part number.
| Insert Code | Inscribed Circle Dia. (IC) | Thick. | Cutting Edge Lg. | Tip Radius | For Cutting Operation | Finish | For Use On | Each | |
C2 Carbide | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| XPGT-1 | 0.187" | 0.094" | 0.27" | 0.007" | Finishing | Uncoated | Aluminum, Brass, Bronze | 0000000 | 000000 |
| VPGT-2 | 1/4" | 1/8" | 0.39" | 0.015" | Finishing | Uncoated | Aluminum, Brass, Bronze | 0000000 | 00000 |
C6 Carbide | |||||||||
| XPGT-1 | 0.187" | 0.094" | 0.27" | 0.007" | Finishing | Uncoated | Stainless Steel, Steel | 0000000 | 00000 |
| VPGT-2 | 1/4" | 1/8" | 0.39" | 0.015" | Finishing | Uncoated | Stainless Steel, Steel | 0000000 | 00000 |
Inspection and Measuring Fixturing
Use these components in coordinate measuring machine (CMM) applications to raise a workpiece and reliably position it on a fixture plate with 1/4"-20 holes. They are not for use in machining applications.
For technical drawings and 3-D models, click on a part number.
Hold-down clamps thread directly into a fixture plate, tower, or compatible component. Slide the clamp down its shaft and press into place against the workpiece for a light hold. They're also known as tension spring clamps. Wire clamps have a slimmer profile than standard, making them good for clamping small parts or minimizing contact area for additional visibility.
Thread | ||||||||
|---|---|---|---|---|---|---|---|---|
| Reach | Ht. | Size | Pitch, mm | Lg. | Material | Tip Finish | Each | |
Standard | ||||||||
| 13/16" | 2" | 1/4"-20 | __ | 1/4" | Aluminum | __ | 0000000 | 000000 |
| 1 9/16" | 2 3/4" | 1/4"-20 | __ | 1/4" | Aluminum | __ | 0000000 | 00000 |
| 1 9/16" | 2 3/4" | 1/4"-20 | __ | 1/4" | Aluminum | Rubber Coated | 0000000 | 00000 |
| 2 5/16" | 2 3/4" | 1/4"-20 | __ | 1/4" | Aluminum | __ | 0000000 | 00000 |
| 2 5/16" | 2 3/4" | 1/4"-20 | __ | 1/4" | Aluminum | Rubber Coated | 0000000 | 00000 |
| 3 7/16" | 3" | 1/4"-20 | __ | 1/4" | Aluminum | __ | 0000000 | 00000 |
| 21mm | 50mm | M4 | 0.7 | 4.8mm | Aluminum | __ | 0000000 | 00000 |
| 21mm | 50mm | M6 | 1 | 6.4mm | Aluminum | __ | 0000000 | 00000 |
| 38mm | 50mm | M4 | 0.7 | 4.8mm | Aluminum | __ | 0000000 | 00000 |
| 38mm | 75mm | M6 | 1 | 6.4mm | Aluminum | __ | 0000000 | 00000 |
| 38mm | 75mm | M8 | 1.25 | 7.9mm | Aluminum | __ | 0000000 | 00000 |
| 58mm | 50mm | M4 | 0.7 | 4.8mm | Aluminum | __ | 0000000 | 00000 |
| 58mm | 75mm | M6 | 1 | 6.4mm | Aluminum | __ | 0000000 | 00000 |
| 58mm | 75mm | M8 | 1.25 | 7.9mm | Aluminum | __ | 0000000 | 00000 |
Wire | ||||||||
| 1 1/4" | 1" | 1/4"-20 | __ | 1/4" | Aluminum | __ | 0000000 | 00000 |
| 2" | 2" | 1/4"-20 | __ | 1/4" | Aluminum | __ | 0000000 | 00000 |
Fixture plates have a grid of 1/4"-20 threaded holes spaced 1/2" apart for attaching components. Alpha-numeric markings around the edges of the plates make it easier to identify holes and repeat tasks. Use aluminum plates with CMMs and optical comparators. Use acrylic plates on vision systems. They are transparent to provide your system with a view of the workpiece.
Holes | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Thick. | Parallel Tolerance | No. of | Style | Thread Size | Ctr.-to-Ctr. | Material | Each | |
| 3" | 3" | 1/2" | 0.0025" | 21 | Threaded | 1/4"-20 | 1/2" | Aluminum | 0000000 | 0000000 |
| 3" | 6" | 1/2" | 0.0025" | 51 | Threaded | 1/4"-20 | 1/2" | Aluminum | 0000000 | 000000 |
| 6" | 6" | 3/8" | 0.0025" | 121 | Threaded | 1/4"-20 | 1/2" | Acrylic Plastic | 0000000 | 000000 |
| 6" | 6" | 3/8" | 0.0025" | 121 | Threaded | 1/4"-20 | 1/2" | Aluminum | 0000000 | 000000 |
| 12" | 12" | 1/2" | 0.005" | 484 | Threaded | 1/4"-20 | 1/2" | Aluminum | 0000000 | 000000 |
| 18" | 18" | 1/2" | 0.01" | 1,156 | Threaded | 1/4"-20 | 1/2" | Aluminum | 0000000 | 00000000 |
| 24" | 24" | 3/4" | 0.01" | 2,116 | Threaded | 1/4"-20 | 1/2" | Aluminum | 0000000 | 00000000 |
The height of fixture towers makes them useful for holding large parts. They have a grid of 1/4"-20 threaded holes spaced 1/2" apart for attaching components. Alpha-numeric markings around the edges of the towers make it easier to identify holes and repeat tasks.
Use an angle plate to mount components at a right angle.
Slots | Holes | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Lg. | Wd. | Ht. | Lg. | Wd. | No. of | Style | Thread Size | Material | Each | |
| 3" | 1" | 3" | 1 3/4" | 1/4" | 18 | Threaded | 1/4"-20 | Aluminum | 0000000 | 000000 |
Thread | ||||||
|---|---|---|---|---|---|---|
| Dia. | Ht. | Size | Lg. | Material | Each | |
Fixed Height | ||||||
| 1/2" | 1/2" | 1/4"-20 | 1/4" | Steel | 0000000 | 000000 |
| 1/2" | 3/4" | 1/4"-20 | 1/4" | Steel | 0000000 | 00000 |
| 1/2" | 1" | 1/4"-20 | 1/4" | Steel | 0000000 | 00000 |
| 1/2" | 2" | 1/4"-20 | 1/4" | Steel | 0000000 | 00000 |
| 1/2" | 3" | 1/4"-20 | 1/4" | Steel | 0000000 | 00000 |
| 3/4" | 1/2" | 1/4"-20 | 1/4" | Steel | 0000000 | 00000 |
| 3/4" | 3/4" | 1/4"-20 | 1/4" | Steel | 0000000 | 00000 |
| 3/4" | 1" | 1/4"-20 | 1/4" | Steel | 0000000 | 00000 |
| 3/4" | 2" | 1/4"-20 | 1/4" | Steel | 0000000 | 00000 |
| 3/4" | 3" | 1/4"-20 | 1/4" | Steel | 0000000 | 00000 |
| 1" | 1/2" | 1/4"-20 | 1/4" | Steel | 0000000 | 00000 |
| 1" | 3/4" | 1/4"-20 | 1/4" | Steel | 0000000 | 00000 |
| 1" | 1" | 1/4"-20 | 1/4" | Steel | 0000000 | 00000 |
| 1" | 2" | 1/4"-20 | 1/4" | Steel | 0000000 | 00000 |
| 1" | 3" | 1/4"-20 | 1/4" | Steel | 0000000 | 00000 |
Adjustable Height | ||||||
| 1/2" | 1 7/16"-1 3/4" | 1/4"-20 | 1/4" | Aluminum | 0000000 | 00000 |
Thread | ||||||
|---|---|---|---|---|---|---|
| Dia. | Ht. | Size | Lg. | Material | Each | |
| 5/8" | 1/2" | 1/4"-20 | 1/4" | Acetal Plastic | 0000000 | 000000 |
Thread | ||||||||
|---|---|---|---|---|---|---|---|---|
| Arm Lg. | Body Lg. | Arm Rotation | Size | Lg. | Body Material | Cone Material | Each | |
| 4 1/4" | 4" | 360° | 1/4"-20 | 1 1/8" | Steel | Acetal Plastic | 0000000 | 000000 |
| For Standoff Dia. | Dia. | Ht. | Thread Size | Material | Includes | Each | |
| 1/2" | 1 1/8" | 2" | 1/4"-20 | Acetal Plastic | 1/4"-20 Knurled Knob | 0000000 | 000000 |
