Manufacturer Manufacturer | Show |
|---|
|
Formulation Formulation | Show |
|---|
|
For Use On For Use On |
|---|
Manufacturer Model Name Manufacturer Model Name |
|---|
|
|
Maximum Temperature Maximum Temperature |
|---|
|
Type Type |
|---|
|
Consistency Consistency |
|---|
|
Cure Type Cure Type |
|---|
|
Clarity Clarity |
|---|
|
Adhesive Type Adhesive Type |
|---|
|
Environment Environment |
|---|
|
Shear Strength Shear Strength |
|---|
|
Viscosity Viscosity |
|---|
|
|
Mix Ratio Mix Ratio |
|---|
|
Approximate Coverage Approximate Coverage |
|---|
|
Container Size Container Size |
|---|
|
|
About Structural Adhesives
More
Epoxy Structural Adhesives
Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. They work especially well on metals. For putty adhesives, slice off the required amount, then knead it together to form a moldable adhesive.
Mfr. Model | Container | Strength | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | No. | Net Weight, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
| HighHeat | 8297 | 2 | Stick | 60 min. | 8 hrs. | 900 | Not Rated | Putty (Not Rated) | -20° to 450° | Gray | Metal, Plastic, Rubber, Composites, Masonry | 000000 | 00000 |
| PlasticWeld | 8237 | 2 | Stick | 20 min. | 24 hrs. | 900 | Not Rated | Putty (Not Rated) | -20° to 300° | Off-White | Plastic, Rubber, Composites, Masonry | 000000 | 0000 |
Quick-Set Epoxy Structural Adhesives
For quick repairs, these epoxies begin to harden in 6 minutes or less. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives.
The size listed is the combined total of the two parts.
50132 works especially well on plastics and composites.
Mfr. Model | Container | Strength | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
| KwikWeld | 8271 | 10 | Tube | 6 min. | 6 hrs. | 1,000 | Not Rated | 1:1 | Paste (250,000 cP) | Not Rated to 300° | Gray | Metal, Plastic, Rubber, Composites | 0000000 | 000000 |
| KwikWeld | 8276 | 2 | Tube | 2 min. | 6 hrs. | 1,000 | Not Rated | 1:1 | Paste (250,000 cP) | Not Rated to 300° | Gray | Metal, Plastic, Rubber, Composites | 0000000 | 0000 |
| PlasticWeld | 50132 | 0.85 | Syringe | 5 min. | 60 min. | 2,000 | Not Rated | 1:1 | Thick Liquid (9,000 cP) | -20° to 300° | Yellow | Metal, Plastic, Rubber, Composites, Masonry, Wood | 000000 | 0000 |
Optically Clear Epoxy Structural Adhesives
For invisible bond lines, these adhesives dry clear. Epoxies are the strongest and most weather- and chemical-resistant structural adhesives. Choose an epoxy that hardens quickly for fast repairs, or one that hardens slowly to allow more time for positioning.
The size listed is the combined total of the two parts.
Mfr. Model | Container | Strength | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel, lbs./in. wd. | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | For Joining | Each | |
| ClearWeld | 50112 | 0.85 | Syringe | 5 min. | 60 min. | 2,000 | Not Rated | 1:1 | Thick Liquid (10,000 cP) | Not Rated to 200° F | Metal, Plastic, Rubber, Wood | 0000000 | 00000 |
Slow-Set Epoxy Structural Adhesives
To allow time to adjust and position parts, these epoxies remain workable for at least 90 minutes. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals.
The size listed is the combined total of the two parts.
Mfr. Model | Container | Strength | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | No. | Size, fl. oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Max. Temperature, °F | For Joining | Each | |
| Cold-Weld | 8265-S | 2 | Tube | 4 hrs. | 24 hrs. | 1,800 | Not Rated | 1:1 | Paste (300,000 cP) | 550° | Metal, Plastic, Rubber, Masonry, Wood | 0000000 | 00000 |
| Cold-Weld | 8281 | 10 | Tube | 4 hrs. | 24 hrs. | 1,800 | Not Rated | 1:1 | Paste (300,000 cP) | 550° | Metal, Plastic, Rubber, Masonry, Wood | 0000000 | 00000 |
| Original | 50165 | 0.85 | Syringe | 4 hrs. | 24 hrs. | 1,800 | Not Rated | 1:1 | Paste (150,000 cP) | 550° | Metal, Plastic, Rubber, Composites, Glass, Masonry | 000000 | 0000 |
Waterproof Epoxy Structural Adhesives
Even when used under water, these adhesives maintain their strength. The most weather- and chemical-resistant structural adhesives, epoxies tend to work especially well on metals.
The size listed is the combined total of the two parts. For putty adhesives, slice off the required amount, then knead it together to form a moldable adhesive.
ClearWeld and Plastic Bonder can be applied to wet surfaces.
WaterWeld and 11801, as well as one-time-use packets, can be applied to wet surfaces or under water.
Mfr. Model | Container | Strength | ||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | No. | Size, fl. oz. | Net Weight, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Mix Ratio | Consistency (Viscosity) | Temp. Range, °F | Color | Environment | For Joining | Each | |
| ClearWeld | 50114 | 0.5 | __ | Syringe | 5 min. | 1 hrs. | 1,500 | __ | 1:1 | Paste | Not Rated to 300° | Clear | Submersible | Metal, Plastic, Rubber, Composites | 0000000 | 00000 |
| ClearWeld | 8212 | 1 | __ | Tube | 5 min. | 1 hrs. | 1,500 | __ | 1:1 | Paste | Not Rated to 300° | Clear | Submersible | Metal, Plastic, Rubber, Composites | 0000000 | 0000 |
| ClearWeld | 50240H | 8 | __ | Tube | 5 min. | 1 hrs. | 1,500 | __ | 1:1 | Paste | Not Rated to 300° | Clear | Submersible | Metal, Plastic, Rubber, Composites | 0000000 | 00000 |
| MarineWeld | 50172 | 0.85 | __ | Syringe | 5 min. | 1 hrs. | 1,800 | Not Rated | 1:1 | Paste (100,000 cP) | -20° to 300° | White | Salt Spray, Submersible | Metal, Plastic, Rubber, Composites, Glass, Masonry, Wood | 000000 | 0000 |
| MarineWeld | 8272 | 2 | __ | Tube | 6 hrs. | 24 hrs. | 1,800 | Not Rated | 1:1 | Paste (250,000 cP) | Not Rated to 500° | Gray | Salt Spray, Submersible | Metal, Plastic, Rubber, Composites | 0000000 | 0000 |
| Plastic Bonder | 50133 | 0.85 | __ | Syringe | 15 min. | 30 min. | 1,700 | __ | 1:1 | Paste | Not Rated to 200° | Tan | Submersible | Plastic | 0000000 | 0000 |
| WaterWeld | 8277 | __ | 2 | Stick | 25 min. | 60 min. | 900 | Not Rated | __ | Putty (Not Rated) | Not Rated to 300° | Off-White | Salt Spray, Submersible | Metal, Plastic, Rubber, Composites | 0000000 | 0000 |
Metal-Reinforced Epoxy Structural Adhesives
These machinable epoxies are mixed with steel, but won’t rust, so they can be used to repair cracks and threaded holes. The strongest and most weather- and chemical-resistant structural adhesives, epoxies work especially well on metals. Slice off your required amount, then knead it together to form a moldable adhesive.
Mfr. Model | Container | Strength | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Name | No. | Net Weight, oz. | Type | Begins to Harden | Reaches Full Strength | Shear, lbs./sq. in. | Peel | Consistency (Viscosity) | Temp. Range, °F | Color | For Joining | Each | |
| SteelStik | 8267 | 2 | Stick | 5 min. | 60 min. | 900 | Not Rated | Not Rated | -20° to 300° | Gray | Metal, Rubber, Composites, Masonry | 000000 | 00000 |