Height Height |
|---|
Capacity per Pair Capacity per Pair |
|---|
|
|
Material Material |
|---|
|
DFARS (Defense Acquisition Regulations Supplement) DFARS (Defense AcquisitionRegulations Supplement)  |
|---|
Component Component |
|---|
|
Mobility Mobility |
|---|
|
Support Type Support Type |
|---|
|
|
Stand Type Stand Type |
|---|
|
Application Application |
|---|
|
Adjustment Type Adjustment Type |
|---|
|
Capacity @ Maximum Height Capacity @ Maximum Height |
|---|
|
RoHS (Restriction of Hazardous Substances) RoHS (Restriction ofHazardous Substances) |
|---|
|
REACH (Registration, Evaluation, Authorization and Restriction of Chemicals) REACH (Registration,Evaluation, Authorization and Restriction of Chemicals) |
|---|
|
Jack Stands—Not for Lifting
After raising a load, add these steel stands for support.
Locking handles lock the ratchet bar in place to support the load.
Locking pins are inserted through the riser to lock the bar in place.
Note: Do not raise or lower stands while under load. Always use stands in pairs and on a hard, flat surface.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Capacity per Pair | Saddle | Base | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | Ht. | Ht. Adjustment Increments | Lg. | Wd. | Dia. | Lg. | Wd. | Pair | ||
Locking Handle | |||||||||||
| A | 3 | 6,000 | 12"-17 3/4" | 9/16" | 1" | 3 1/2" | __ | 7 1/2" | 8 1/4" | 0000000 | 000000 |
| A | 6 | 12,000 | 15 5/8"-23 3/4" | 11/16" | 1 1/4" | 4 1/4" | __ | 10 3/8" | 11 5/8" | 0000000 | 000000 |
Locking Pin | |||||||||||
| B | 12 | 24,000 | 19"-29 1/2" | 1 1/2" | 3" | 6" | 15 7/8" | __ | __ | 0000000 | 000000 |
| C | 22 | 44,000 | 13 7/8"-19 7/8" | 3" | 3" | 3 3/4" | __ | 11" | 11" | 0000000 | 000000 |
Screw Jack Stands
Hold and adjust the height of heavy loads such as truck trailers. The screw adjustment lets you make small changes to the height of your load.
Note: Jack stands should not be moved when under load.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Cap. | Holding Cap. | Saddle | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | tons | lbs. | Ht. | Max. Lift | Lg. | Wd. | Base Dia. | Each | |
| 2 1/2 | 5,000 | 25 | 50,000 | 44"-51" | 7" | 5" | 5" | 14" | 0000000 | 0000000 |
Cap. | Holding Cap. | Saddle | Base | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | tons | lbs. | Ht. | Max. Lift | Dia. | Lg. | Wd. | Lg. | Wd. | Handle Lg. | Wheel Material | Features | Each | |
With Two Axle-Mounted Wheels | |||||||||||||||
| 20 | 40,000 | 50 | 100,000 | 39"-51" | 11 1/2" | 8" | __ | __ | 16" | 17 5/8" | 20" | Rubber | Removable Handle | 0000000 | 0000000 |
With Three Axle-Mounted Wheels | |||||||||||||||
| 20 | 40,000 | 50 | 100,000 | 40"-51" | 11 1/2" | __ | 24" | 6" | 16" | 17 5/8" | 20" | Rubber, Steel | Removable Handle | 0000000 | 000000 |
| Component | For Wheel Configuration | Wheel Material | Includes | Each | |
| Grip for Stationary Jack Stands | __ | __ | __ | 0000000 | 00000 |
| Grip for Mobile Jack Stands | Two Axle-Mounted Wheels, Three Axle-Mounted Wheels | __ | __ | 0000000 | 0000 |
| Handle for Mobile Jack Stands | Two Axle-Mounted Wheels, Three Axle-Mounted Wheels | __ | 1 Grip | 0000000 | 00000 |
| Saddle for Mobile Jack Stands | Two Axle-Mounted Wheels | __ | __ | 0000000 | 000000 |
| Wheel for Mobile Jack Stands | Three Axle-Mounted Wheels | Steel | __ | 0000000 | 00000 |
| Wheel Kit for Mobile Jack Stands | Two Axle-Mounted Wheels, Three Axle-Mounted Wheels | Rubber | 1 Axle, 1 Cotter Pin, 2 Wheels | 0000000 | 000000 |
Ratchet Jack Stands
The ratcheting action of these jacks stands makes adjusting them under load easier than screw jack stands. Use them to hold and adjust the height of heavy loads such as truck trailers.
Note: Jack stands should not be moved when under load.
Warning: Never use to support people or loads over people.
For technical drawings and 3-D models, click on a part number.
Cap. | Holding Cap. | Saddle | Base | ||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| tons | lbs. | tons | lbs. | Ht. | Max. Lift | Dia. | Lg. | Wd. | Lg. | Wd. | Handle Lg. | Wheel Material | Features | Each | |
With Two Axle-Mounted Wheels | |||||||||||||||
| 20 | 40,000 | 50 | 100,000 | 39"-51" | 12" | 8" | __ | __ | 16" | 17 5/8" | 20" | Rubber | Removable Handle | 0000000 | 0000000 |
With Three Axle-Mounted Wheels | |||||||||||||||
| 20 | 40,000 | 50 | 100,000 | 40"-51" | 11 1/2" | __ | 24" | 6" | 16" | 17 5/8" | 20" | Rubber and Steel | Removable Handle | 0000000 | 000000 |
| Component | For Wheel Configuration | Wheel Material | Includes | Each | |
| Grip | Two Axle-Mounted Wheels, Three Axle-Mounted Wheels | __ | __ | 0000000 | 00000 |
| Handle | Two Axle-Mounted Wheels, Three Axle-Mounted Wheels | __ | 1 Grip | 0000000 | 00000 |
| Saddle | Two Axle-Mounted Wheels | __ | __ | 0000000 | 000000 |
| Wheel | Three Axle-Mounted Wheels | Steel | __ | 0000000 | 00000 |
| Wheel Kit | Two Axle-Mounted Wheels, Three Axle-Mounted Wheels | Rubber | 1 Axle, 1 Cotter Pin, 2 Wheels | 0000000 | 000000 |
Reel Jacks
Speed up dispensing from your reels. Use a pair of these adjustable-height, heavy duty jacks to lift and support each end of a spindle (sold separately). A screw mechanism adjusts the height of the jacks. Rollers on the top of the jacks allow the spindle to spin freely as you wind or dispense rope, wire, hose, and chain.
Build-Your-Own Tripod-Style Support Stands
Create a stand with interchangeable attachments for versatility.
V-Style and wheel supports slide onto the internal tube of stands. For roller supports, remove the stand's internal tube and mount them directly to the stand to prevent instability.
Attachments slide onto the arms of the V-style support.
Roller | Arm | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| For Stand | O'all Ht. with Stand | For OD | Material | Cap., lbs. | Between Frame Wd. | Dia. | Material | Lg. | Wd. | Wheel Dia. | No.of Wheels Included | Includes | Each | |
Roller | ||||||||||||||
| A C | 25"-33" 29"-43" | 1/8"-10" | Steel | 2,000 | 10" | 2" | Steel | __ | __ | __ | __ | __ | 00000000 | 0000000 |
| B D | 25"-33" 29"-43" | 1/8"-10" | Steel | 2,000 | 10" | 2" | Steel | __ | __ | __ | __ | __ | 0000000 | 000000 |
V-Style | ||||||||||||||
| A; C B; D | 21"-36" 28"-49" | 1/8"-36" | Steel | 2,000 | __ | __ | __ | 4" | 3" | __ | __ | __ | 0000000 | 00000 |
| A; C B; D | 21"-36" 28"-49" | 1/8"-36" | Steel | 2,000 | __ | __ | __ | 4" | 3" | __ | __ | V-Style Attachment | 00000000 | 000000 |
Wheel | ||||||||||||||
| A; C B; D | 21"-36" 28"-49" | 1 1/4"-24" | Stainless Steel | 2,000 | __ | __ | __ | __ | __ | 4" | 2 | __ | 0000000 | 000000 |
| A; C B; D | 21"-36" 28"-49" | 1 1/4"-24" | Aluminum | 2,000 | __ | __ | __ | __ | __ | 4" | 2 | __ | 0000000 | 000000 |
| A; C B; D | 21"-36" 28"-49" | 1 1/2"-24" | Phenolic Plastic | 1,000 | __ | __ | __ | __ | __ | 4" | 2 | __ | 00000000 | 000000 |
Build-Your-Own Support Stands
Create a stand with interchangeable attachments for versatility.
Large-Diameter V-Style Support Stands
With long, wide angled arms, this stand supports pipe up to 36" diameter. Leveling feet provide stability.
Optional V-wheels mount into the arms to make rotating material easy.
Arm | Base | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| For OD | Ht. | Cap., lbs. | Lg. | Wd. | Lg. | Wd. | Material | Features | Each | |
| 4"-36" | 27"-39" | 4,500 | 12" | 4 5/8" | 31" | 31" | Steel | Leveling Feet | 0000000 | 0000000 |
Wheel | |||||
|---|---|---|---|---|---|
| Dia. | Material | Cap., lbs. | Pkg. Qty. | Pkg. | |
| 4" | Aluminum | 4,500 | 4 | 0000000 | 0000000 |
Wheel | Stem | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Dia. | Wd. | Mount Ht. | Cap., lbs. | Dia. | Lg. | Wheel/Tread Material | Caster Type | Pkg. Qty. | Pkg. | |
| 8" | 2" | 4 1/8" | 4,500 | 1 3/8" | 4 1/8" | Polypropylene Plastic | Swivel with Brake | 5 | 0000000 | 0000000 |
Roller-Top V-Style Support Stands
Cradle pipe and bar stock while machining. V-shape rollers provide smooth material feeding for long, thin objects.
Roller | Base | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| For Max. OD | Ht. | Cap., lbs. | Dia. | Material | Lg. | Wd. | Material | Mount. Fasteners Included | Mount. Hole Dia. | Each | |
| 4" | 25 3/4"-38" | 400 | 2" | Steel | 21 3/8" | 24 1/4" | Steel | No | 3/8" | 0000000 | 0000000 |
Tabletop Large-Diameter Support Stands
Place stands on a work surface to position pipe while machining. All position pipe parallel to the frame.
V-groove stands also allow pipe to be perpendicular to the frame.
Roller-Top Support Stands
Rollers support and help guide material into machinery.
Roller | Base | |||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Between Frame Wd. | Ht. | Cap., lbs. | Dia. | Spacing | Material | Lg. | Wd. | Material | Mount. Fasteners Included | Mount. Hole Dia. | Features | Each | ||
| A | 13" | 28"-42" | 250 | 1 7/8" | __ | Steel | 18" | 15 1/2" | Steel | __ | __ | Folding Legs, Nonskid Feet | 0000000 | 0000000 |
| B | 16" | 23"-39" | 300 | 2" | __ | Steel | 21 3/8" | 24 1/4" | Steel | No | 3/8" | __ | 000000 | 000000 |
| B | 16" | 28"-50" | 300 | 2" | __ | Steel | 21 3/8" | 24 1/4" | Steel | No | 3/8" | __ | 000000 | 000000 |
| C | 16" | 22"-32" | 500 | 1.9" | __ | Galvanized Steel | 17" | 16" | Steel | __ | __ | Leveling Feet | 0000000 | 000000 |
| C | 16" | 28"-45 1/2" | 500 | 1.9" | __ | Galvanized Steel | 17" | 16" | Steel | __ | __ | Leveling Feet | 0000000 | 000000 |
| D | 13" | 26 1/2"-43 1/2" | 500 | 1 3/8" | 4" | Galvanized Steel | 18" | 15" | Steel | __ | __ | Leveling Feet | 0000000 | 000000 |
| E | 13" | 26 1/2"-43 1/2" | 500 | 1 3/8" | 4" | Galvanized Steel | 66" | 15" | Steel | __ | __ | Folding Legs, Leveling Feet | 0000000 | 000000 |
Ball-Transfer-Top Support Stands
Ball transfers allow movement in any direction so you can turn material without lifting it. Feet have mounting holes for floor mounting.
Ball | Base | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Top Rail Wd. | Ht. | Cap., lbs. | Dia. | Spacing | Material | Lg. | Wd. | Material | Mounting Fasteners Included | Mounting Hole Dia. | Each | |
| 18" | 28"-48" | 200 | 1" | 2" | Steel | 21 3/8" | 24 1/4" | Steel | No | 3/8" | 000000 | 0000000 |
Jack Posts
Support beams and joists.
To adjust the height of locking-pin jack posts, extend the post to the approximate height needed and insert the locking pin through the hole to secure. Then turn the threaded handle counterclockwise to raise it up to 6" for more precise height adjustments.
To adjust the height of locking-ring jack posts, slide the safety lock into the notch to secure at the approximate height needed. Then turn the 10" long handle for final height adjustments.
For technical drawings and 3-D models, click on a part number.
Ht. | Capacity | Base | Top Plate | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Min. | Max. | @ Min. Ht. | @ Max. Ht. | Material | Wd. | Dp. | Wd. | Dp. | Mounting Hole Dia. (No. of) | Mounting Fasteners Included | Center-to-Center Adjustments | Handle Lg. | Each | |
Locking Pin | ||||||||||||||
| 78" | 138" | 6,400 lbs. @ 78" | 3,800 lbs. @ 138" | Steel | 4 3/4" | 4 3/4" | 4 3/4" | 4 3/4" | 9/16" (8) | No | 6" | __ | 0000000 | 0000000 |
| 120" | 216" | 9,300 lbs. @ 120" | 2,700 lbs. @ 216" | Steel | 4 3/4" | 4 3/4" | 4 3/4" | 4 3/4" | 9/16" (8) | No | 6" | __ | 0000000 | 000000 |
Locking Ring | ||||||||||||||
| 16" | 24" | 18,000 lbs. @ 16" | 18,000 lbs. @ 24" | Steel | 4" | 4" | 4" | 4" | 3/8" (4), 5/8" (4) | No | 4" | 10" | 000000 | 00000 |
| 25" | 41" | 18,000 lbs. @ 25" | 17,000 lbs. @ 41" | Steel | 4" | 4" | 4" | 4" | 3/8" (4), 5/8" (4) | No | 4" | 10" | 000000 | 000000 |
| 40" | 64" | 18,000 lbs. @ 40" | 17,000 lbs. @ 64" | Steel | 4" | 4" | 4" | 4" | 3/8" (4), 5/8" (4) | No | 4" | 10" | 000000 | 000000 |
| 68" | 100" | 17,000 lbs. @ 68" | 14,000 lbs. @ 100" | Steel | 4" | 4" | 4" | 4" | 3/8" (4), 5/8" (4) | No | 4" | 10" | 000000 | 000000 |
Laboratory Jacks
These jacks are often used to position small shop and laboratory equipment.
Attach a support rod to jacks with a 6" Lg.×6" Wd. head or larger to mount items, such as temperature probes, thermometer clamps, or flask and column clamps.
Ratcheting control handles replace the knob on jacks with a 12" Lg.×12" Wd. head or larger for easier height adjustments.
For technical drawings and 3-D models, click on a part number.
Jacks | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
Head | Support Rods | Ratcheting Control Handles | ||||||||
| Max. Load Capacity, lbs. | Ht. | Lg. | Wd. | Material | Each | Each | Each | |||
| 100 | 2 1/2"-5" | 3" | 3" | Stainless Steel | 0000000 | 0000000 | 000000 | 00 | 000000 | 00 |
| 100 | 2 1/2"-5" | 4" | 4" | Stainless Steel | 0000000 | 000000 | 000000 | 00 | 000000 | 00 |
| 100 | 4"-19 1/2" | 12" | 12" | Stainless Steel | 0000000 | 00000000 | 000000 | 000000 | 0000000 | 0000000 |
| 100 | 4"-19 1/2" | 16" | 16" | Stainless Steel | 0000000 | 00000000 | 000000 | 00000 | 0000000 | 000000 |
| 133 | 3"-9 3/4" | 6" | 6" | Stainless Steel | 0000000 | 000000 | 000000 | 00000 | 000000 | 00 |
| 227 | 3 1/2"-13" | 8" | 8" | Stainless Steel | 0000000 | 000000 | 000000 | 00000 | 000000 | 00 |
| 247 | 3 1/2"-13" | 10" | 10" | Stainless Steel | 0000000 | 000000 | 000000 | 00000 | 000000 | 00 |
Flexible-Leg Positioning Stands
Bend and wrap the legs around almost anything while keeping a level mounting surface. Rubber rings around each section prevent slipping. These stands can also be used like a traditional tripod.
| Max. Load Capacity, lbs. | Ht. | Head Dia. | Leg Dia. | Material | Color | Mount Type | Thread Size | Each | |
| 1 | 4"-10 1/2" | 1 3/4" | 1" | Plastic | Black | Threaded Stud | 1/4"-20 | 0000000 | 000000 |