Bright colors and reflective stripes make workers stand out in low-visibility areas. Jackets cover your hips.

Protect your arms and chest from heat and sparks when welding.

These jackets protect you from the cold and wind while offering greater mobility than coats.

Stay warm without the bulk of heavy coats and multiple layers. These jackets have a battery-operated heated core.

These flame-resistant vests protect against electrical arc flashes. Their bright colors and reflective stripes make workers easily visible.

These hip-length jackets hold up against dirt, wear, and abrasion when working with lab equipment or light machinery.

These knee-length coats hold up against dirt, wear, and abrasion when working with lab equipment or light machinery.

Wear these coats to protect sensitive equipment from damage caused by static electricity. Coats are knee length.

Keep workers clean and protected from spills and splashes on food processing lines while reducing the risk of contaminating the food.

Rubber and plastic coatings prevent oil and other liquids from penetrating these aprons.

These knee-length coats are made of breathable cotton and are self-extinguishing. A flap in the front conceals the zipper.

Bright colors and reflective stripes make workers stand out in low-visibility environments. These jackets meet ANSI/ISEA 107 standards for high-visibility clothing.

Keep dry in wet and rainy conditions.

Keep dry in wet and rainy conditions. These sturdy coats resist abrasion and mildew and extend past your knees for added protection.

Ponchos are spacious for a generous fit, so they can be worn over bulky work clothes or equipment such as backpacks.

Keep dry in wet and rainy conditions.

Coats are knee length, providing more coverage than shirts.

These knee-length coats offer more coverage than jackets to protect against heat and sparks. Hot particles won't get trapped because there are no pockets. Pull tabs allow for quick removal.

Prevent pollutants from contaminating the space with these aprons. They resist spills and splashes from acids, alkalies, and other chemicals.

Guard insulation from heavy impact and chemical exposure. This metal jacketing is corrosion resistant and often used outdoors.

This common insulation material is typically used on hot and cold water lines and in process piping.

Hook-and-loop fasteners make it easy to install, remove, and reuse this flexible insulation. Use on steam, hot water, and process pipes and fittings.

These rigid, lightweight melamine foam tubes are wrapped in an ISO Class 5 and Fed. Spec. Class 100 clean room jacket that is suitable for sanitary and washdown applications. They’re typically used on cold and hot water piping and with refrigeration systems.

These kits insulate one P-trap and two stop valves to reduce the risk of burns from accidental contact with hot pipes under your sink. The molded, flexible pipe covers are ADA compliant when properly installed.

Very rigid with a 0% water absorption rate, this insulation is unaffected by corrosive environments, organic solvents, and most acids. It is typically used in chemical-processing systems and underground lines.

Rigid and flame resistant, these insulation tubes are typically used in process piping and mechanical systems.

Superior in strength and durability, these thin strips insulate as well as protect personnel from accidental contact with hot pipes. Use for exhaust, hot water, and process pipes.

This very rigid insulation offers the lowest heat-flow rate of our pipe insulation and restricts absorption of water, air, and gas. It is typically used in process piping and chiller plants and performs best in applications below 50° F.

Wrap pipes, tubing, and fittings to prevent condensation from forming. These strips are for use on copper, iron, and steel.

Prevent condensation from forming on refrigeration and air conditioning lines and cold‐water piping.

A silicone rubber coating on this fiberglass sleeving protects against sparks and molten metal splash.

Add a layer of insulation to prevent electricity and heat from dissipating from wire and cable.

A specially formulated silicone rubber coating allows this sleeving to stretch to twice its relaxed ID to fit over items during installation; it then tightens around its contents for a secure fit.

Tight braiding makes this sleeving resistant to fraying when cut with scissors. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

Tested to meet MIL-STD-202, this sleeving meets performance standards for flame retardance. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

This sleeving stretches to fit over items for easy installation, and then tightens around its contents for a secure fit. Choose from multiple colors to organize wire and cable.

Use this braided copper sleeving to protect wire and cable from signal distortion caused by nearby equipment and devices. It stretches to fit over items for easy installation, then tightens around its contents for a secure fit.

With a temperature rating of 1800°F or higher, this sleeving can withstand hotter temperatures than fiberglass and most ceramic.

Unlike fiberglass and silica, this sleeving won't irritate skin, so it's easier to handle. It has a temperature rating of 1100° F or higher.

Tightly braided nylon fibers give this sleeving excellent abrasion resistance. As it wears, the fibers frizz and make the outer wall thicker for improved protection.

Snaps keep this sleeving securely closed, yet permit quick access to contents and allow you to route wires in between the snaps. Use it to easily wrap around wire, cable, and hose without disconnecting them.

Zip this sleeving around wire, cable, or hose that are connected at both ends to quickly bundle them.

Silicone rubber coats this fiberglass sleeving to shed sparks and molten metal splash. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.

The tightly braided construction makes this polyester sleeving abrasion resistant. It has a slit along the entire length so it easily wraps around wire, cable, and hose without disconnecting them.

Unlike traditional sleeving that bunches wire and cable into a circle, this sleeving holds them flat, so it’s good for tight spaces such as vehicle interiors. It has a slit along the entire length so it easily wraps around wire and cable without disconnecting them.

Made of aluminum with a fiberglass liner, this sleeving reflects heat away from contents and withstands temperatures up to 390°F. A slit along the entire length makes it easy to install around wire, cable, and hose without disconnecting them.

This sleeving reflects heat away from contents and withstands temperatures up to 900°F. The corrugated construction gives it impact and abrasion resistance similar to conduit, but with more flexibility.

This sleeving reflects heat away from contents and withstands temperatures up to 300°F. A slit along the length makes it easy to install over wire, cable, and hose without disconnecting them. The corrugated construction gives it impact and abrasion resistance similar to conduit, with more flexibility.

Rated UL 94 V-2, this sleeving resists combustion and minimizes the spread of flames. A slit along the length makes it easy to install over wire, cable, and hose without disconnecting them. It has impact and abrasion resistance similar to conduit, with more flexibility.

A hinge along the entire length makes this one-piece sleeving easy to open for installation. Interlocking ridges overlap along the opening to protect contents from dust and dirt. The corrugated construction gives it the impact and abrasion resistance of conduit, with more flexibility.

Made of neoprene rubber, this sleeving has excellent abrasion resistance. It can be quickly applied to hose or cable like tape, so it's a good option for emergency patches.

This sleeving absorbs UV light, so it can be used in direct sunlight without getting damaged. A reusable alternative to tape and cable ties, it allows you to route wire and cable between the spirals.

Protect cables, cords, and wire and form them into bundles in your food-processing plant while lowering the risk of contaminating the food.

Keep general purpose tubing in a variety of sizes on hand.

With thin walls, this tubing shrinks faster than other high-temperature tubing. It withstands up to 500° F.

Often used in automated applications such as robotics, this highly flexible silicone rubber tubing withstands continuous motion without cracking and tearing. It resists abrasion and can be dragged over rough surfaces without damage.

Extra-thick walls provide better protection against abrasion and tears than standard moisture-seal tubing, as well as creating a water-resistant seal.

After being cleaned with alcohol, this tubing is bagged and sealed in a clean room. It's certified for material quality and purity.

Often used to bundle batteries, capacitors, and other electronics, this tubing tightly conforms to objects, similar to shrink wrap. It has excellent resistance to chemicals, oil, and acids.

A flame-retardant additive makes this polyolefin tubing combustion resistant and minimizes the spread of flames.

Approved for contact with food, this tubing is FDA Compliant 21 CFR 177.1330.

A layer of conductive cloth protects wire and cable from signal interference caused by nearby equipment and devices.

Made of PVDF, this tubing has excellent cut and abrasion resistance. It has a flame-retardant additive that resists combustion and minimizes the spread of flames.

Create a water-resistant seal—this tubing has an adhesive lining that melts when the tubing is heated and bonds to the underlying surface.

Made of PVC, this tubing resists chemicals, oil, and solvents. The adhesive lining creates a water-resistant seal when heated.

Extra-thick walls provide more protection against abrasion and tears than standard high-shrink-ratio tubing. This tubing shrinks down to 1/6th of its original ID, so it creates a tight seal over irregularly shaped objects.

Protect bus bars and other high-voltage devices—this tubing withstands voltages up to 5,000 volts.

Also known as breakout boots, these splitters insulate and seal the point where wire splits off from cable, or where cables exit from conduit.

Create a permanent seal without applying heat. This tubing is also known as cold-shrink tubing.

Use this wrap with heat-shrink tubing to create a moisture-resistant seal. Apply it like tape around wire and cable, then slide the tubing over the wrap. The wrap melts when tubing is heated and bonds to the underlying surface.