Brown Jackets | McMaster-Carr

Choose a Category

Clear All

	Color Color	Show

	Brown

	Color Color	Hide

	Insulation Type Insulation Type

	Elbow
	Sheet/Strip
	Tee

	Size Size

2XL

3XL

One Size

	Material Material

	Garment Garment

Jacket

Cape Sleeves

Cape Sleeve Bib

	Application Application

	For Pipe Size For Pipe Size

	System of Measurement System of Measurement

Inch

	Wall Thickness Wall Thickness

1 1/2"

	ID ID

	Length Length

	Maximum Temperature Maximum Temperature

Less than 250° F

1,000° to 1,999° F

	Minimum Temperature Minimum Temperature

-99° to -50° F

-49° to 0° F

Not Rated

	Flexibility Flexibility

Flexible

Semi-Rigid

Rigid

	For Use On For Use On

Pipe

Tanks

	Closure Type Closure Type

Snaps

Zipper

Buckle

	R Value R Value

	Heat Flow Rate Heat Flow Rate

0.23 Btu @ 75° F

2.44 Btu @ 900° F

	Density Density

1.75 lbs./cu. ft.

5 lbs./cu. ft.

	Cuff Style Cuff Style


Knit	Snaps

	Specifications Met Specifications Met

AMS/MIL

ASTM

	Tube Style Tube Style

Slit

View catalog pages (7)

Forward

How can we improve?

91 Products

About Heat-Shrink Tubing

About Selecting Thermal Insulation

Men's Cotton Duck

Brown Cotton Duck

These jackets protect you from the cold and wind while offering greater mobility than heavyweight coats. They have a zipper down the front.

Cotton duck jackets have a water-resistant shell and provides better abrasion resistance than nylon and cotton/polyester. These jackets are filled with polyester insulation and have a soft, quilted interior lining. They have a knit waist and cuffs to trap heat and keep the jacket in place. Jackets have two waist pockets and one inside pocket to protect contents from the elements.

Men's

Available Sizes
Size	Chest Size
M	38"/40"
L	42"/44"
XL	46"/48"
2XL	50"/52"
3XL	54"/56"

Cotton Duck Fabric
Insulation Material	Lg.	Min. Temperature, °F	Closure Type	Cuff Style	Color	Choose a Size		Each
Polyester Fiberfill	29"	Not Rated	Zipper	Knit	Brown	M, L, XL, 2XL, 3XL	00000000	0000000

Welding Jackets

Brown Leather

Protect your arms and torso when welding.

Leather protects against radiant heat, flames, and welding sparks. It’s flexible and resists cuts and abrasion better than cotton. Brown leather jackets are designed with small vents under the arms and along the upper back to increase air circulation and cool you off. They have a pocket on each sleeve, as well as an inside pocket.When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these jackets.

Men's

Available Sizes
Size	Chest Size	Lg.
Leather
S	36"/38"	26"
S	36"/38"	30"
M	40"/42"	26"
M	40"/42"	30"
L	44"/46"	26"
L	44"/46"	30"
XL	48"/50"	26"
XL	48"/50"	30"
2XL	52"/54"	26"
2XL	52"/54"	30"
3XL	56"/58"	30"

Leather
Closure Type	Cuff Style	Features	Color	Choose a Size	Lg.		Each
Snaps	Snaps	One Inside Pocket; Two Sleeve Pockets	Brown	S, M, L, XL, 2XL	26"	000000	0000000
Snaps	Snaps	One Inside Pocket; Two Sleeve Pockets	Brown	S, M, L, XL, 2XL, 3XL	30"	000000	000000

Welding Cape Sleeves

Leather

Protect your arms and chest when welding. Attach a bib (sold separately) to the snaps to protect your stomach.

Cotton is treated to protect against low radiant heat and minor sparks.

Leather protects against radiant heat, flames, and welding sparks. It’s flexible and resists cuts and abrasion better than cotton. There is a pocket on the right sleeve.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these cape sleeves.

Available Sizes
Size	Chest Size
S	36"/38"
M	40"/42"
L	44"/46"
XL	48"/50"
2XL	52"/54"
3XL	56"/58"

Welding Cape Sleeves										Welding Cape Sleeve Bibs
Material	Lg.	Closure Type	Attachment Type	Cuff Style	Features	Color	Choose a Size		Each		Each
Leather	14"	Snaps	Snaps	Snaps	One Sleeve Pocket	Brown	S, M, L, XL, 2XL, 3XL	0000000	000000	0000000	000000

Welding Cape Sleeve Bibs

Leather

Snap these bibs onto cape sleeves (sold separately) to protect your stomach when welding.

Leather protects against radiant heat, flames, and welding. It’s flexible and resists cuts and abrasion better than cotton. These bibs have an adjustable buckle in the back.

Material	Lg.	Wd.	Closure Type	Attachment Type	Color	Size		Each
Leather	19"	22"	Buckle	Snaps	Brown	One Size	0000000	000000

Moisture-Seal Heat-Shrink Tubing

Create a water-resistant seal—this tubing has an adhesive lining that melts when the tubing is heated and bonds to the underlying surface. Choose tubing with a larger shrink ratio to cover irregularly shaped objects or cable assemblies that have a large size difference between the cable and connector. Semi-rigid tubing bends only slightly.

AMS/MIL-DTL-23053/4 Class 1 tubing meets requirements for material quality and color.

Dielectric strength is the maximum voltage a material can handle before it starts to breakdown. The higher the dielectric strength of a material, the better it is for preventing electricity, heat, or signal from dissipating from wire and cable.

2.5:1 Shrink Ratio

Material: Polyolefin Plastic
Dielectric Strength: 900 V/mil
Shrink Temperature: 275° F
Temperature Range: -65° to 230° F
AMS/MIL-DTL-23053/4 Class 1, UL Recognized

ID					4 ft. Lg.
Before Shrinking	Min. After Shrinking	Min. Wall Thick. After Shrinking	Flexibility	Color		Each
0.13"	0.02"	0.04"	Semi-Rigid	Brown	00000000	00000

Harsh Environment Heat-Shrink Tubing Assortments

Maintain a supply of tubing in a variety of sizes and materials that withstands harsh conditions such as abrasion, moisture, and chemicals.

PVC tubing has excellent resistance to chemicals, oil, and acids.

Polyolefin is for general purpose use. Polyolefin with adhesive creates a water-resistant seal; the adhesive melts when heated and bonds to the underlying surface.

PTFE has excellent abrasion resistance and withstands higher temperatures than other tubing.

FEP tubing is high strength to resist abrasion, cuts, tears, and chemicals.

PVDF resists abrasion, cuts, and tears.

Plastic Box

Includes	Number of Pieces	Lg.	Shrink Ratio	Shrink Temp., °F	Colors Included		Each
0.05"-0.75" ID Before Shrinking of Polyolefin (41 pieces, 9 sizes) 0.05"-0.75" ID Before Shrinking of PVC (18 pieces, 9 sizes) 0.05"-0.38" ID Before Shrinking of PVDF (14 pieces, 7 sizes) 0.17"-0.25" ID Before Shrinking Nylon Butt Splices (3 sizes, 3 each) 0.29"-0.6" ID Before Shrinking Polyolefin End Caps (6 pieces, 3 sizes)	82	1/2ft.	2:1, 2.5:1	195° to 340°	Black, Blue, Brown, Clear, Gray, Green, Red, White, Yellow	00000000	0000000
0.05"-1" ID Before Shrinking of Polyolefin (49 pieces, 10 sizes) 0.25"-1" ID Before Shrinking of Polyolefin with Adhesive Lining (52 pieces, 5 sizes) 0.05"-0.75" ID Before Shrinking of PVC (18 pieces, 9 sizes) 0.05"-0.08" ID Before Shrinking of PTFE (17 pieces, 5 sizes) 0.05"-0.38" ID Before Shrinking of PVDF (14 pieces, 7 sizes) 0.03"-0.12" ID Before Shrinking of FEP (22 pieces, 6 sizes) 0.17"-0.25" ID Before Shrinking Nylon Butt Splices (3 sizes, 12 each) 0.29"-0.6" ID Before Shrinking Polyolefin End Caps (6 pieces, 3 sizes)	181	1", 1/2ft.	1.2:1, 1.5:1, 2:1, 2.5:1, 3:1	195° to 485°	Black, Blue, Brown, Clear, Gray, Green, Red, White, Yellow	00000000	000000
0.06"-0.5" ID Before Shrinking of Polyolefin (42 pieces, 7 sizes) 0.13"-1" ID Before Shrinking of Polyolefin with Adhesive Lining (16 pieces/6sizes) 0.06"-0.5" ID Before Shrinking of PVC (14 pieces, 7 sizes) 0.17"-0.5" ID Before Shrinking of PVDF (14 pieces, 7 sizes) 0.03"-0.12" ID Before Shrinking of FEP (14 pieces, 7 sizes) 0.17"-0.25" ID Before Shrinking Nylon Butt Splices (3 Sizes, 4 each)	112	1/2ft.	1.2:1, 2:1, 2.5:1, 3:1	195° to 395°	Black, Blue, Brown, Clear, Gray, Green, Green with Yellow Stripe, Red, White, Yellow	00000000	000000

High-Strength Basalt Pipe Insulation

Max. Temperature: 1200° F
Heat Flow Rate: 2.44 Btu @ 900° F
Density: 1.75 lbs./cu. ft.
Color: Brown

Superior in strength and durability, these thin strips insulate as well as protect personnel from accidental contact with hot pipes. Use for exhaust, hot water, and process pipes.

Thick.	Wd.	R Value	Flexibility	Lengths, ft.		Per Ft.
1/16"	1"	0.03	Flexible	15, 25, 50, 100	0000000	00000
1/16"	2"	0.03	Flexible	15, 25, 50, 100	0000000	0000

Fiberglass Pipe Insulation

This common insulation material is typically used on hot and cold water lines and in process piping. To use outdoors, add metal jacketing.

Tubes, elbows, and tees are formed to provide the best fit on pipe and are the easiest to install. If your pipe is larger than the sizes we offer, choose a sheet/strip.

90° Elbows

Elbow

Temperature Range: 0° to 1000° F
Heat Flow Rate: 0.23 Btu @ 75° F
Density: 5 lbs./cu. ft.
Color: Brown
Specifications Met: ASTM E84 25/50 for Flame and Smoke, ASTM C585

1" Wall Thick.
ID	For Pipe Size	For Copper Tube Size	Flexibility	R Value		Each
5/8"	3/8	1/2	Rigid	4.3	00000000	00000
7/8"	1/2	3/4	Rigid	4.3	00000000	0000
1 1/8"	3/4	1	Rigid	4.3	00000000	0000
1 3/8"	1	1 1/4	Rigid	4.3	00000000	0000
1 5/8"	1 1/4	1 1/2	Rigid	4.3	00000000	0000
1 7/8"	1 1/2	__	Rigid	4.3	00000000	0000
2 1/8"	__	2	Rigid	4.3	00000000	0000
2 3/8"	2	__	Rigid	4.3	00000000	0000
2 5/8"	__	2 1/2	Rigid	4.3	00000000	0000
2 7/8"	2 1/2	__	Rigid	4.3	00000000	00000
3 1/2"	__	__	Rigid	4.3	00000000	00000
4 1/2"	4	__	Rigid	4.3	00000000	00000
5 1/2"	5	__	Rigid	4.3	00000000	00000
6 5/8"	6	__	Rigid	4.3	00000000	00000
8 5/8"	8	__	Rigid	4.3	00000000	00000
10 3/4"	10	__	Rigid	4.3	00000000	00000
12 3/4"	__	__	Rigid	4.3	00000000	00000
1 1/2" Wall Thick.
5/8"	3/8	1/2	Rigid	6.5	00000000	00000
7/8"	1/2	3/4	Rigid	6.5	00000000	00000
1 1/8"	3/4	1	Rigid	6.5	00000000	00000
1 3/8"	1	1 1/4	Rigid	6.5	00000000	00000
1 5/8"	1 1/4	1 1/2	Rigid	6.5	00000000	00000
1 7/8"	1 1/2	__	Rigid	6.5	00000000	00000
2 1/8"	__	2	Rigid	6.5	00000000	00000
2 3/8"	2	__	Rigid	6.5	00000000	00000
2 5/8"	__	2 1/2	Rigid	6.5	00000000	00000
2 7/8"	2 1/2	__	Rigid	6.5	00000000	00000
3 1/2"	__	__	Rigid	6.5	00000000	00000
4 1/2"	4	__	Rigid	6.5	00000000	00000
5 1/2"	5	__	Rigid	6.5	00000000	00000
6 5/8"	6	__	Rigid	6.5	00000000	00000
8 5/8"	8	__	Rigid	6.5	00000000	00000
10 3/4"	10	__	Rigid	6.5	00000000	00000
12 3/4"	__	__	Rigid	6.5	00000000	00000
2" Wall Thick.
5/8"	3/8	1/2	Rigid	8.7	00000000	00000
7/8"	1/2	3/4	Rigid	8.7	00000000	00000
1 1/8"	3/4	1	Rigid	8.7	00000000	00000
1 3/8"	1	1 1/4	Rigid	8.7	00000000	00000
1 5/8"	1 1/4	1 1/2	Rigid	8.7	00000000	00000
1 7/8"	1 1/2	__	Rigid	8.7	00000000	00000
2 1/8"	__	2	Rigid	8.7	00000000	00000
2 3/8"	2	__	Rigid	8.7	00000000	00000
2 5/8"	__	2 1/2	Rigid	8.7	00000000	00000
2 7/8"	2 1/2	__	Rigid	8.7	00000000	00000
3 1/2"	__	__	Rigid	8.7	00000000	00000
4 1/2"	4	__	Rigid	8.7	00000000	00000
5 1/2"	5	__	Rigid	8.7	00000000	00000
6 5/8"	6	__	Rigid	8.7	00000000	00000
8 5/8"	8	__	Rigid	8.7	00000000	00000
10 3/4"	10	__	Rigid	8.7	00000000	000000
12 3/4"	__	__	Rigid	8.7	00000000	000000

Tees

Tee

Temperature Range: 0° to 1000° F
Heat Flow Rate: 0.23 Btu @ 75° F
Density: 5 lbs./cu. ft.
Color: Brown
Specifications Met: ASTM E84 25/50 for Flame and Smoke, ASTM C585

1" Wall Thick.
ID	For Pipe Size	For Copper Tube Size	Flexibility	R Value		Each
5/8"	3/8	1/2	Rigid	4.3	00000000	00000
7/8"	1/2	3/4	Rigid	4.3	00000000	0000
1 1/8"	3/4	1	Rigid	4.3	00000000	0000
1 3/8"	1	1 1/4	Rigid	4.3	00000000	0000
1 5/8"	1 1/4	1 1/2	Rigid	4.3	00000000	0000
1 7/8"	1 1/2	__	Rigid	4.3	00000000	0000
2 1/8"	__	2	Rigid	4.3	00000000	0000
2 3/8"	2	__	Rigid	4.3	00000000	0000
1 1/2" Wall Thick.
5/8"	3/8	1/2	Rigid	6.5	00000000	00000
7/8"	1/2	3/4	Rigid	6.5	00000000	00000
1 1/8"	3/4	1	Rigid	6.5	00000000	00000
1 3/8"	1	1 1/4	Rigid	6.5	00000000	00000
1 5/8"	1 1/4	1 1/2	Rigid	6.5	00000000	00000
1 7/8"	1 1/2	__	Rigid	6.5	00000000	00000
2 1/8"	__	2	Rigid	6.5	00000000	00000
2 3/8"	2	__	Rigid	6.5	00000000	00000
2 7/8"	2 1/2	__	Rigid	6.5	00000000	00000
3 1/2"	__	__	Rigid	6.5	00000000	00000
4 1/2"	4	__	Rigid	6.5	00000000	00000
6 5/8"	6	__	Rigid	6.5	00000000	00000
2" Wall Thick.
1 1/8"	3/4	1	Rigid	8.7	00000000	00000
1 3/8"	1	1 1/4	Rigid	8.7	00000000	00000
1 5/8"	1 1/4	1 1/2	Rigid	8.7	00000000	00000
1 7/8"	1 1/2	__	Rigid	8.7	00000000	00000
2 1/8"	__	2	Rigid	8.7	00000000	00000
2 3/8"	2	__	Rigid	8.7	00000000	00000
3 1/2"	__	__	Rigid	8.7	00000000	00000
4 1/2"	4	__	Rigid	8.7	00000000	00000
6 5/8"	6	__	Rigid	8.7	00000000	00000

Terms and Conditions and Privacy Policy

	Black
	Dark Blue
	White
	Green
	Black/Fluorescent Yellow
	Brown
	Silver
	Light Blue
	Blue
	Yellow
	Gray
	Fluorescent Yellow
	Orange
	Red
	Clear
	Beige
	Fluorescent Orange
	Semi-Clear White
	Amber
	Green with Yellow Stripe
	Maroon
	Off-White
	Peach

About Heat-Shrink Tubing

About Selecting Thermal Insulation

Cold-Protection Jackets

Welding Jackets

Welding Cape Sleeves

Welding Cape Sleeve Bibs

Moisture-Seal Heat-Shrink Tubing

Harsh Environment Heat-Shrink Tubing Assortments

High-Strength Basalt Pipe Insulation

Fiberglass Pipe Insulation