Color Color | Show |
---|
|
Color Color | Hide |
---|
Sleeving Type Sleeving Type |
---|
![]() | ![]() |
Expandable | Spiral Wrap |
![]() | ![]() |
Corrugated | Wrap-Around |
System of Measurement System of Measurement |
---|
|
Maximum Temperature Maximum Temperature |
---|
|
Minimum Temperature Minimum Temperature |
---|
|
Performance Properties Performance Properties |
---|
|
Insulation Type Insulation Type |
---|
![]() | Tube |
Length Length |
---|
|
|
|
Specifications Met Specifications Met |
---|
|
OD OD |
---|
Sleeving Construction Sleeving Construction |
---|
|
Tube Style Tube Style |
---|
|
For Use On For Use On |
---|
|
Flexibility Flexibility |
---|
|
Cell Type Cell Type |
---|
![]() | Open |
Application Application |
---|
|
More
More
More
These jackets protect you from the cold and wind while offering greater mobility than heavyweight coats. They have a zipper down the front.
Cotton/polyester jackets provide the comfort of a sweatshirt with the warmth of a jacket. Women’s cotton/polyester jackets have a water-repellent finish to keep you dry. Adjustable hook and loop cuffs tighten to fit your wrists and expand to fit over gloves. These jackets come with a snap-on hood—tighten the draw cord for a snug fit to keep out wind. They have two waist pockets, a chest pocket, and an internal chest pocket.
Available Sizes | |||
---|---|---|---|
Size | Chest Size | Length | Dress Size |
S | 34"/36" | 25" | 4/6 |
M | 37"/39" | 25" | 8/10 |
L | 40"/43" | 25" | 12/14 |
XL | 44"/47" | 25" | 16/18 |
2XL | 48"/51" | 25" | 20/22 |
3XL | 52"/55" | 25" | 24/26 |
Protect your arms and torso when welding.
Leather protects against radiant heat, flames, and welding sparks. It’s flexible and resists cuts and abrasion better than cotton. Gray leather jackets have a higher material weight than brown leather jackets to provide better durability and protection.
Acrylic/Buna-N blend protects against radiant heat, flames, and welding sparks while providing superior breathability to leather. These jackets have two chest pockets.
When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these jackets.
Available Sizes | ||
---|---|---|
Size | Chest Size | Lg. |
Leather | ||
S | 36"/38" | 30" |
M | 40"/42" | 30" |
L | 44"/46" | 30" |
XL | 48"/50" | 30" |
2XL | 52"/54" | 30" |
3XL | 56"/58" | 30" |
4XL | 60"/62" | 30" |
Acrylic/Buna-N Fabric Blend | ||
S | 32"/34" | 31" |
M | 36"/38" | 32" |
L | 40"/42" | 32" |
XL | 44"/46" | 33" |
2XL | 48"/50" | 33" |
Tight braiding makes this sleeving resistant to fraying when cut with scissors. It’s expandable, so it stretches to fit over items for easy installation, then tightens around its contents for a secure fit. The braided construction permits heat and moisture to dissipate. Made of polyester, it resists some wear and chemicals, so it’s best used in indoor environments.
ID | Expanded ID | Wall Thick. | Temperature Range, °F | Specifications Met | Color | 10 ft. | 50 ft. | 100 ft. | 200 ft. | 250 ft. | 500 ft. | 1,000 ft. | |
Polyester Fabric | |||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|
1/8" | 1/4" | 1/32" | -90° to 255° | UL Recognized, CSA Certified | Gray | 00000000 | |||||||
1/4" | 7/16" | 1/32" | -90° to 255° | UL Recognized, CSA Certified | Gray | 00000000 | |||||||
3/8" | 5/8" | 1/32" | -90° to 255° | UL Recognized, CSA Certified | Gray | 00000000 | |||||||
1/2" | 3/4" | 1/32" | -90° to 255° | UL Recognized, CSA Certified | Gray | 00000000 | |||||||
3/4" | 1" | 1/32" | -90° to 255° | UL Recognized, CSA Certified | Gray | 00000000 | |||||||
1" | 1 3/16" | 1/32" | -90° to 255° | UL Recognized, CSA Certified | Gray | 00000000 | |||||||
1 1/4" | 1 1/2" | 1/32" | -90° to 255° | UL Recognized, CSA Certified | Gray | 00000000 | |||||||
1 1/2" | 2" | 1/32" | -90° to 255° | UL Recognized, CSA Certified | Gray | 00000000 | |||||||
2" | 2 1/2" | 1/32" | -90° to 255° | UL Recognized, CSA Certified | Gray | 00000000 |
Rated UL94V2, this sleeving has an additive that resists combustion and minimizes the spread of flames. Made of polyethylene, it resists acids and solvents. Wrap it around wire, cable, and hose without disconnecting them. It has a slit along the entire length that will not gap when flexing. The corrugated construction gives it the impact and abrasion resistance of conduit but with better flexibility.
ID | OD | Temperature Range, °F | Specifications Met | Color | 5 ft. | 25 ft. | 50 ft. | 100 ft. | |
Polyethylene Plastic | |||||||||
---|---|---|---|---|---|---|---|---|---|
1/4" | 3/8" | -40° to 200° | UL 94V2 | Gray | 00000000 | ||||
3/8" | 1/2" | -40° to 200° | UL 94V2 | Gray | 00000000 | ||||
1/2" | 11/16" | -40° to 200° | UL 94V2 | Gray | 00000000 | ||||
5/8" | 13/16" | -40° to 200° | UL 94V2 | Gray | 00000000 | ||||
3/4" | 1" | -40° to 200° | UL 94V2 | Gray | 00000000 | ||||
1" | 1 1/4" | -40° to 200° | UL 94V2 | Gray | 00000000 | ||||
1 1/4" | 1 7/16" | -40° to 200° | UL 94V2 | Gray | 00000000 | ||||
1 1/2" | 1 7/8" | -40° to 200° | UL 94V2 | Gray | 00000000 | ||||
2" | 2 3/8" | -40° to 200° | UL 94V2 | Gray | 00000000 |
Wrap this sleeving around wire, cable, and hose without disconnecting them. It has a slit along the entire length and wraps over itself to stay closed without an adhesive strip or other closure, and will not gap when flexed. Made of polyester, it resists some wear and chemicals so it’s best used in indoor environments.
ID | Wall Thick. | Temperature Range, °F | Specifications Met | Color | 3 ft. | 10 ft. | 25 ft. | 100 ft. | |
Polyester Fabric | |||||||||
---|---|---|---|---|---|---|---|---|---|
1/8" | 1/32" | -90° to 255° | UL Recognized, CSA Certified | Gray | 00000000 | ||||
1/4" | 1/32" | -90° to 255° | UL Recognized, CSA Certified | Gray | 00000000 | ||||
3/8" | 1/32" | -90° to 255° | UL Recognized, CSA Certified | Gray | 00000000 | ||||
1/2" | 1/32" | -90° to 255° | UL Recognized, CSA Certified | Gray | 00000000 | ||||
3/4" | 1/32" | -90° to 255° | UL Recognized, CSA Certified | Gray | 00000000 | ||||
1" | 1/32" | -90° to 255° | UL Recognized, CSA Certified | Gray | 00000000 | ||||
1 1/4" | 1/32" | -90° to 255° | UL Recognized, CSA Certified | Gray | 00000000 | ||||
1 1/2" | 1/32" | -90° to 255° | UL Recognized, CSA Certified | Gray | 00000000 | ||||
2" | 1/32" | -90° to 255° | UL Recognized, CSA Certified | Gray | 00000000 |
A mica and silicone rubber blend allows this sleeving to withstand temperatures up to 2100° F and creates a fire barrier around its contents. A good option for emergency patches, it can be quickly applied to hose or cable like tape. When wrapping, sleeving should overlap itself by half its width.
Create a water-resistant seal—this tubing has an adhesive lining that melts when the tubing is heated and bonds to the underlying surface. Choose tubing with a larger shrink ratio to cover irregularly shaped objects or cable assemblies that have a large size difference between the cable and connector. Semi-rigid tubing bends only slightly.
AMS/MIL-DTL-23053/4 Class 1 tubing meets requirements for material quality and color.
Dielectric strength is the maximum voltage a material can handle before it starts to breakdown. The higher the dielectric strength of a material, the better it is for preventing electricity, heat, or signal from dissipating from wire and cable.
ID | 4 ft. Lg. | |||||
---|---|---|---|---|---|---|
Before Shrinking | Min. After Shrinking | Min. Wall Thick. After Shrinking | Flexibility | Color | Each | |
0.19" | 0.06" | 0.04" | Semi-Rigid | Gray | 00000000 | 00000 |
Maintain a supply of tubing in a variety of sizes and materials that withstands harsh conditions such as abrasion, moisture, and chemicals.
PVC tubing has excellent resistance to chemicals, oil, and acids.
Polyolefin is for general purpose use. Polyolefin with adhesive creates a water-resistant seal; the adhesive melts when heated and bonds to the underlying surface.
FEP tubing is high strength to resist abrasion, cuts, tears, and chemicals.
PVDF resists abrasion, cuts, and tears.
Includes | Number of Pieces | Lg. | Shrink Ratio | Shrink Temp., °F | Colors Included | Each | |
0.06"-0.5" ID Before Shrinking of Polyolefin (42 pieces, 7 sizes) 0.13"-1" ID Before Shrinking of Polyolefin with Adhesive Lining (16 pieces/6sizes) 0.06"-0.5" ID Before Shrinking of PVC (14 pieces, 7 sizes) 0.17"-0.5" ID Before Shrinking of PVDF (14 pieces, 7 sizes) 0.03"-0.12" ID Before Shrinking of FEP (14 pieces, 7 sizes) 0.17"-0.25" ID Before Shrinking Nylon Butt Splices (3 Sizes, 4 each) | 112 | 1/2ft. | 1.2:1, 2:1, 2.5:1, 3:1 | 195° to 395° | Black, Blue, Brown, Clear, Gray, Green, Green with Yellow Stripe, Red, White, Yellow | 00000000 | 0000000 |
Also known as breakout boots, these splitters insulate and seal the point where wire splits off from cable. An adhesive lining melts when the splitter is heated and bonds to the underlying surface, creating a water-resistant seal.
Split End ID | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
For Number of Wires | Before Shrinking | After Shrinking | Min. Wall Thick. After Shrinking | Min. Lg. After Shrinking | Shrink Ratio | Flexibility | For Cable Shape | Temp. Range, °F | Color | Each | ||
H | 4 | 0.4" | 0.1" | 0.06" | 4.4" | 4:1 | Flexible | Flat | -65° to 275° | Gray | 00000000 | 000000 |
Melamine has a lightweight construction that allows quick and easy installation. Use on cold and hot water piping and with refrigeration systems. Insulation has an all-service jacket (ASJ) made of kraft paper with an adhesive strip closure. Seal seams with silicone sealant and join lengths with tape (both sold separately).
1" Wall Thick. | |||||||
---|---|---|---|---|---|---|---|
ID | For Pipe Size | For Copper Tube Size | Lg., ft. | Flexibility | R Value | Each | |
Tubes with Kraft Paper Jacketing | |||||||
1/2" | 1/4 | 3/8 | 4 | Rigid | 4 | 00000000 | 000000 |
5/8" | 3/8 | 1/2 | 4 | Rigid | 4 | 00000000 | 00000 |
3/4" | __ | __ | 4 | Rigid | 4 | 00000000 | 00000 |
7/8" | 1/2 | 3/4 | 4 | Rigid | 4 | 00000000 | 00000 |
1" | __ | __ | 4 | Rigid | 4 | 00000000 | 00000 |
1 1/8" | 3/4 | 1 | 4 | Rigid | 4 | 00000000 | 00000 |
1 3/8" | 1 | 1 1/4 | 4 | Rigid | 4 | 00000000 | 00000 |
1 1/2" | __ | __ | 4 | Rigid | 4 | 00000000 | 00000 |
1 5/8" | 1 1/4 | 1 1/2 | 4 | Rigid | 4 | 00000000 | 00000 |
1 7/8" | 1 1/2 | __ | 4 | Rigid | 4 | 00000000 | 00000 |
2" | __ | __ | 4 | Rigid | 4 | 00000000 | 00000 |
2 3/8" | 2 | __ | 4 | Rigid | 4 | 00000000 | 00000 |
2 1/2" | __ | __ | 4 | Rigid | 4 | 00000000 | 00000 |
3" | __ | __ | 4 | Rigid | 4 | 00000000 | 00000 |
4" | __ | __ | 4 | Rigid | 4 | 00000000 | 00000 |
4 1/2" | 4 | __ | 4 | Rigid | 4 | 00000000 | 000000 |
These rigid, lightweight melamine foam tubes are wrapped in an ISO Class 5 (Class 100) clean room jacket that is suitable for sanitary and washdown applications. They’re typically used on cold and hot water piping and with refrigeration systems. The jacket has an adhesive strip closure. Seal seams with a silicone sealant and join lengths with tape (both sold separately).
1" Wall Thick. | ||||||||
---|---|---|---|---|---|---|---|---|
ID | For Pipe Size | For Copper Tube Size | Lg., ft. | Flexibility | Environmental Rating | R Value | Each | |
Tubes with PVC Plastic Jacketing | ||||||||
1/2" | 1/4 | 3/8 | 4 | Rigid | Class 100 (Fed. Std.), Class 5 (ISO) | 4 | 00000000 | 000000 |
5/8" | 3/8 | 1/2 | 4 | Rigid | Class 100 (Fed. Std.), Class 5 (ISO) | 4 | 00000000 | 00000 |
3/4" | __ | __ | 4 | Rigid | Class 100 (Fed. Std.), Class 5 (ISO) | 4 | 00000000 | 00000 |
7/8" | 1/2 | 3/4 | 4 | Rigid | Class 100 (Fed. Std.), Class 5 (ISO) | 4 | 00000000 | 00000 |
1" | __ | __ | 4 | Rigid | Class 100 (Fed. Std.), Class 5 (ISO) | 4 | 00000000 | 00000 |
1 1/8" | 3/4 | 1 | 4 | Rigid | Class 100 (Fed. Std.), Class 5 (ISO) | 4 | 00000000 | 00000 |
1 3/8" | 1 | 1 1/4 | 4 | Rigid | Class 100 (Fed. Std.), Class 5 (ISO) | 4 | 00000000 | 00000 |
1 1/2" | __ | __ | 4 | Rigid | Class 100 (Fed. Std.), Class 5 (ISO) | 4 | 00000000 | 00000 |
1 5/8" | 1 1/4 | 1 1/2 | 4 | Rigid | Class 100 (Fed. Std.), Class 5 (ISO) | 4 | 00000000 | 00000 |
1 7/8" | 1 1/2 | __ | 4 | Rigid | Class 100 (Fed. Std.), Class 5 (ISO) | 4 | 00000000 | 00000 |
2" | __ | __ | 4 | Rigid | Class 100 (Fed. Std.), Class 5 (ISO) | 4 | 00000000 | 00000 |
2 3/8" | 2 | __ | 4 | Rigid | Class 100 (Fed. Std.), Class 5 (ISO) | 4 | 00000000 | 00000 |
2 1/2" | __ | __ | 4 | Rigid | Class 100 (Fed. Std.), Class 5 (ISO) | 4 | 00000000 | 00000 |
3" | __ | __ | 4 | Rigid | Class 100 (Fed. Std.), Class 5 (ISO) | 4 | 00000000 | 00000 |
4" | __ | __ | 4 | Rigid | Class 100 (Fed. Std.), Class 5 (ISO) | 4 | 00000000 | 000000 |
4 1/2" | 4 | __ | 4 | Rigid | Class 100 (Fed. Std.), Class 5 (ISO) | 4 | 00000000 | 000000 |