Snap these bibs onto cape sleeves (sold separately) to protect your stomach when welding.

Cotton is treated to protect against low radiant heat and minor sparks. These bibs have a tie in the back.

Protect against chemical spills and splashes. These jackets are polyester with a PVC coating inside and out. Snaps down the front and a storm flap helps keep liquid splashes out. They have open cuffs.

Fasten a hood (sold separately) to jackets with collar snaps.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these jackets.

Keep dry in wet and rainy conditions. These jackets resist mildew and are washable. They have snaps down the front with a storm flap to help keep rain out, as well as snaps on the cuffs.

PVC-coated polyester provides good resistance to water and abrasion. These jackets have two waist pockets and an attached hood.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these jackets.

Protect against chemical spills and splashes. These coats are polyester with a PVC coating inside and out, and extend past your knees for added protection. Snaps down the front and a storm flap helps keep liquid splashes out. They have open cuffs.

Fasten a hood (sold separately) to the collar snaps.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these coats.

Coats extend past your knees to keep you dry in wet and rainy conditions. They resist mildew and are washable. They have snaps down the front with a storm flap to help keep rain out, as well as elastic cuffs and two waist pockets.

When measuring chest size, measure around the fullest part of your chest. Take all measurements over any clothing you expect to wear under these coats.

Protect against chemical spills and splashes. These suits are polyester with a PVC coating inside and out. They have snaps down the front and a storm flap to keep liquid splashes out. Sleeves and bib overalls have open cuffs to fit over gloves and boots. Bib overalls have adjustable suspenders to modify the length.

Fasten a hood (sold separately) to jackets with collar snaps.

Keep dry in wet and rainy conditions. All suits include a hooded jacket with snaps down the front.

PVC-coated polyester provides good resistance to water and abrasion. They are washable. The jackets have a storm flap and two waist pockets. Suits with pants have open cuffs on the sleeve and snaps on the legs to fit easily inside boots. Suits with bib overalls have snap cuffs on the sleeve and open cuffs on the bottom of the legs.

Bib overalls have adjustable suspenders to modify the length.

Pants have an elastic waist.

When measuring chest size, measure around the fullest part of your chest. Find your waist size by measuring just above the top of your hip bone. Take all measurements over any clothing you expect to wear under these suits.

This expandable sleeving stretches to fit over items for easy installation, then tightens around its contents for a secure fit. The braided construction permits heat and moisture to dissipate. Made of polyester, it withstands some wear and chemicals, so it’s best used in indoor environments. Choose from multiple colors to organize wire and cable.

Wrap this sleeving around cable, cords and wires to protect them and to form bundles. Unlike cable ties and tape, this sleeving can be unwound and reused.

Polyethylene sleeving holds up under rubbing and scraping, and won’t degrade in solvents. However, it is not as soft as silicone rubber sleeving, and does not provide as much cushioning. This sleeving has been tested by UL to meet nationally recognized industry and safety standards for use in electronic systems.

Use this tubing where wire and cable may be exposed to chemicals, oil, and acids.

PVC plastic tubing is more chemical resistant than rubber. It also resists UV, so it won’t fade or discolor when exposed to sunlight.

AMS/MIL-DTL-23053/1 Class 2, 23053/2 Class 2, and 23053/13 tubing meets requirements for material quality and color.

Flame rated VW-1 tubing meets requirements for preventing the spread of flames based on a timed test with vertically suspended material.

Dielectric strength is the maximum voltage a material can handle before it starts to breakdown. The higher the dielectric strength of a material, the better it is for preventing electricity, heat, or signal from dissipating from wire and cable.

Use this general purpose polyolefin tubing to create a tight, custom-fit insulation to protect wire and cable.

AMS/MIL-DTL-23053/5 Class 1 and Class 2 tubing meets requirements for material quality and color.

Dielectric strength is the maximum voltage a material can handle before it starts to breakdown.

Keep a variety of sizes of general purpose polyolefin tubing on hand.